How to find out the set handler for a particular signal?

I have an interesting puzzle to solve. l'm investigating problems with someone else's code and I'd like to get the name of the handler that is set for SEGV. psig shows that the process catches SEGV, however I don't have access to the source code for all the libraries it links against and none of the source code I have sets a handler for SEGV. Is there a way to find out the name of the signal handler that is set for a particular signal in a process? I'm sure the source was compiled with cc -g. Solaris 8

Hello Haritha,
Please follow the path.
Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
Please assign points.

Similar Messages

  • How to find out the Queries Generated for a particular ods?

    Hi all,
    There are atleast 10 queries generated for a Particular ODs zyyyyy. I would like to know what are the queries generated for a particular ods.
    I have used the where use list of the ods. But it did not displayed the queries generated for that ods.
    I have looked at the bex query for that ods but cant find any query being generated on that ods??
    Is there any way to find out what are the queries generated for a particular ods?
    thanxs
    haritha

    Hello Haritha,
    Please follow the path.
    Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
    Please assign points.

  • How to find out the GR Numbers for which IR has not been done

    Hi Sap Gurus,
    Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
    Thanks N Regards,
    Siddhartha

    Hi Siddarth,
    Solution :
            1) Go to SE16 - Table Name : EKBE (PO History)
            2) Field - BUDAT (Posting Date)
            3) Transaction event Type:
                             - 1 (Only GR's )
                             - 2 (Both GR and IR)
            4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
    In addition to MB5S, you can try this also...

  • How to find out the infospoke name for an existing infoobject?

    Hi,
    Could any one pls tell me how to find out the existing infospoke name for an infoobject?
    i've tried with where used list but its not coming....can any one pls suggest
    Thanks,
    Suri

    Hi,
        Check in metadata repository for that infoObject.
    If you are still not able to identify, goto RSBO tx and press F4.
    You will get the list of Infospokes available.
    Go in each and chk from the General Tab, if the infoObject is available in the source system.
    Regards,
    Balaji V

  • How to find out the best settings for BDT

    Hi there.
    I am trying to predict a movie rating. I downloaded datasets from IMDb, prepared them. A tried all of the regression algorithms, but the best result is giving Boosted Decision Tree. Now I am dealing with the best settings in this algorithm.
    With default, running time was 69 seconds and the mean absolute error was 0.4844, which is quite much I think. So I tried to improve it by changing parameters of the BDT module. I tried to set Leaves per tree to 150 and than experimentaly find
    remaining parameters. I've come to Samples per leaf=12, Learning rate=0.04 and
    Number of trees=700. Running time was 78 seconds and mean absolute error was 0.4596.
    Input of the algorithm is joined matrix with 14 columns (11 features) and 67672 rows splitted into 70:30 (training:testing).
    Is there any way how to find out the best setting of Boosted Decision Tree?

    Yordan's suggestion is correct, though the documentation is a bit outdated.
    You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
    Regards,
    aK

  • How to find out the printer name for the Idoc

    Hi guys
    I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
    Regards
    Madhoo

    Hi,
    For ALE/IDOC the  medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
    Regards,
    Nagaraj

  • How to find out the SET PARAMETER ID for FB02 transaction

    hi masters,
    i m working on a alv report and in that i have to make a BELNR field as a interactive field. i m using the 'user command' for this.
    FORM user_command USING ucomm TYPE sy-ucomm
                        selfield TYPE slis_selfield.
      IF selfield-value IS NOT INITIAL.
        CASE selfield-fieldname.
          WHEN 'BELNR'.
            SET PARAMETER ID 'FBAS'  FIELD selfield-value.
            CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
          WHEN OTHERS.
            MESSAGE text-000 TYPE 'W'.
        ENDCASE.
      ENDIF.
    ENDFORM.                    "user_command
    i used this code using this. using this code my program goes to FB03 tc but it don't shows the data of BELNR what i was clicked. it always shows first BELNR no. in the table. plz anyone help me for this..
    the  SET PARAMETER ID 'FBAS'  i m using is right? if not plz suggest me how to find out correct one?

    Hi Vicky,
    To know the Parameter Id of any field in a transaction ,
    you just press F1 onthe particular field then in technical settings under Field data
    you can see the PARMATER ID.
    So if you check like this you can see 'BLN' as parameter id for Document number in FB03
    transaction
    Regards,
    Manoj Kumar P

  • How to find out the User Details for the particular transaction

    Hi,
    Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
    Thanks
    Sap Guru

    Hi:
    Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
    Please let me know if you need more information,
    Assign points if useful.
    Regards
    MSReddy

  • How to find out the logout details for a perticular user .

    Hi,
    I have an requirement to write a report which will run for hourly basis. using this program  i need to find out the logon & logout details so that i can calculate  the total productive hour for a perticular user. using table usr41 i can find out the logon detail. but i need to know the logout detail also to calculate the productive hour.
    pls suggest.

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

  • How to find out the Area Menu for a Report/ Table/Function Module

    Hi,
    Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
    Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
    Thank you for your quick response...
    Regards,
    Thiru
    <b></b>

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

  • How to find out the table, data for the IDOCS is pulled from?

    HI
    The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397.  This creates IDOCS that are sent out and eventually wind up in IMOS.
    The IDOC Type is CREMAS.
    Can you tell me which table or tables the data for these IDOCS is pulled from?
    Or tell me the procedure to find out the table name.
    Thanks,
    das.
    Edited by: sathish dasari on Dec 10, 2009 11:54 AM

    You can use Transp. Table      TBD62 .
    enter Message Type                      CREMAS
    you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

  • How to find out the process count for a database during a particular window

    Hi Team,
    I want to find out the maximum process count reached for a database for an interval. Say between 1:00 to 2:00 AM IST. Please help
    Database version:11.2.0.2
    OS:AIX 6.1

    Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
    Simialr information is available in DBA_HIST_SYSSTAT.
    Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
    You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
    Regards,
    Sreejith

  • How to find out the ASCII Values for Spanish character

    Hi,
    I had an requirement to store Spanish character and also need to fileter the records based on the Spanish character.
    Kindly guide me for below.
    To filter the Records which contains spanish characters?
    To get the ASCII Values for the particular column?
    E.g. we can find out the ASCII value of 'a' by using the syntax select ASCII('a') from dual.
    But I want to find the ASCII Values for the particular column value. Ie. name.
    E.g., Client name is "Suresh", I want to the ASCII Values for entire name of "Suresh".
    Kindly do the needful help / Guidance on this.
    Thanks,
    Orahar

    To expand on what I said in my first post, you want to do something along these lines:
    with t (thename) as
      select 'Suresh' from dual
    select thename
         , substr(TheName, level, 1)
         , ascii(substr(thename, level))
      from t
    connect by level <= length(thename);The output of the above query is:
    THENAM S ASCII(SUBSTR(THENAME,LEVEL))
    Suresh S                           83
    Suresh u                          117
    Suresh r                          114
    Suresh e                          101
    Suresh s                          115
    Suresh h                          104
    6 rows selected.Note that the WITH statement is only there to simulate a table for this example. With a table, all you do is get rid of the with and substitute the name "t" for the name of your table (also the name of the column to whatever name the column has in your table).
    Lastly, I suggest you post your question along with, an example table and the output you'd like to get in the PL/SQL forum. There are people there that will give you all kinds of great ways of solving that problem.
    HTH,
    John.

  • How to find out the features/available in a particular version

    Hi
    thanks in advance. I am a novice user. I am using oracle 8.1.7. How can I find out the commands/ features rellated to this version of SQL.

    Hi Devmiral
    Thanks for the links that are of great help. akadia.com is full of resources But I faced one problem as most of the analytical functions did not work on 8.1.7 like rank, dense_rank, running total etc etc
    I have a celeron laptop with 256 MB of RAM and installed oracle 8i database. working on sql is comfortable, but can I install SQL 9.0.1 or higher on this laptop and operate at the same speed.
    I do not want to install the whole of Oracle 9i or Oracle 10g, my objective is to practice all the 9i/10g features of SQL installing the minimum of SQL engine.
    Is it possible, if possible then do let me know the methods or procedure.
    Thanks

  • How to find all the tables associated for a particular transaction

    Hi-
    May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
    Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
    Regards
    Sekhar

    Dear Micky Oestreich
    May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
    Hi Vengal Rao
    Thanks for your response. It helped me.
    Regards
    Sekhar

Maybe you are looking for