How to find out the standard smartforms?
how to find out the standard smartforms?
Hi Sunil
You just go to transaction <b>SE80</b>(Object Navigator)
and in that enter <b>Package BC470</b>
which contains the standard Programs on Smart forms ,
I think there you can find some Smart forms in those programs.
I hope it will help you.
If it helps reward with points.
Regards Rk
Similar Messages
-
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
How to find out the structure stored field value in a standard program
Hi Gurus,
Please suggest me how to find out the structure field stores the value in which table.
Exanple : i have a strutured field in T.code cj31 is BPDY-WERT1 and it is stotring value 10,000,000.00. know i need to find out in which table this value is storing .
Please suggest me its urgent.
Thanks in Adavance!!!
Points will be rewarded.......
Regards,
Kranthihi,
Go to transaction ST05,Click activate trace with filter,Give the transactio name as cj31,Go to the transaction and navigate to the place where the particular field is present, then again go to st05 ,Deactivate the trace and display the trace.
Now u can see how the data is fetched ,U can even go to display mode of the same transaction cj33
Thanks
San -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out the Transactions used per month & the USER who used that
Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
layout TYPE slis_layout_alv,
variant TYPE disvariant,
events TYPE slis_t_event WITH HEADER LINE,
heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
wa_usertcode TYPE swncaggusertcode,
wa TYPE zusertcode,
t_ut TYPE STANDARD TABLE OF zusertcode,
wa_result TYPE zusertcode,
t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
EXPORTING
component = 'TOTAL'
ASSIGNDSYS = 'DEV'
periodtype = 'M'
periodstrt = month
TABLES
usertcode = t_usertcode
EXCEPTIONS
no_data_found = 1
OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
wa-user = wa_usertcode-account.
IF wa_usertcode-entry_id+72 = 'T'.
wa-tcode = wa_usertcode-entry_id.
wa-report = space.
ELSE.
wa-tcode = space.
wa-report = wa_usertcode-entry_id.
ENDIF.
COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = fcat[]
i_save = 'A'
is_variant = variant
it_events = events[]
TABLES
t_outtab = t_ut
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
How to find out the tables that will be affected using a transaction
Hi,
How to find out the list of database tables that will be affected when we use a standard transaction(ex. VA01, MM01..)...?(like When we create a salesorder, which tables and which fields will be affected..?)
Is there any transaction or a simple way to find out the solution?
Thanks,
Pradeep.Hi,
Give transaction code and in menu(system- status), double click onthe Program name.
Check in TOP INCLUDE - you will find all the tables related to that transaction.
Thanks,
Anitha -
How to find out the GR Numbers for which IR has not been done
Hi Sap Gurus,
Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
Thanks N Regards,
SiddharthaHi Siddarth,
Solution :
1) Go to SE16 - Table Name : EKBE (PO History)
2) Field - BUDAT (Posting Date)
3) Transaction event Type:
- 1 (Only GR's )
- 2 (Both GR and IR)
4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
In addition to MB5S, you can try this also... -
How to find out the selected item in the lsit
Hi all,
How to find out the selected item in the list,can any please post some examples which easy to understand,because iam not a good programmerThis sample program uses a checkbox as selection, you could also use a HOTSPOT.
report zrich_0002 no standard page heading.
data: imara type table of mara with header line.
data: check_box(1) type c,
report_lines type i.
start-of-selection.
* Create the gui status with BACK button in standard place
* and a READ button in the application toolbar
set pf-status 'CHECK'.
select * into corresponding fields of table imara from mara up to 100 rows.
loop at imara.
write:/ check_box as checkbox, imara-matnr, imara-matkl.
hide imara-matnr.
endloop.
report_lines = sy-linno - 1.
top-of-page.
write: 'List of materials'. uline.
top-of-page during line-selection. write: 'Material.....'. uline.
at user-command.
case sy-ucomm.
when 'READ'.
check_box = space.
set pf-status 'CHECK' excluding 'READ'.
do report_lines times.
read line sy-index field value check_box.
if check_box = 'X'.
write:/ 'You have selected material',
imara-matnr.
endif.
enddo.
endcase.
Regards,
Rich Heilman -
How to find out the active associations and clear inactive associations?
Hi guys,
I can find out the associates on IOS AP using the command "show dot11 associations client". The output includes all associations even though the clients have left for a long while.
1.How to find out the active associations?
2.How to clear the inactive associations?
3.What is the by default timeout for the inactive associations?
Thanks,
yytellmeyHi Huang,
try this:
Show the associated clients:
sh dot11 associations all-client
Deauthenticate client
clear dot11 client
Activity Timeout
show dot11 activity-timeout
per standard 60 secs.
Best regards,
Frank -
How to find out the person who did a transport.
How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find out the selected column in Table Control
Hi all,
How to find out the selected column in Table Control?
Thanks & Regards,
YJRHi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
WITH KEY SELECTED = 'X'.
IF SY-SUBRC = 0.
CLEAR: W_DUMMY, W_COL_NAME.
SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
W_COL_NAME.
endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha -
How to find out the selected line in list
Hi all,
Can any one tell me how to find out the selected event in the listYour subject said 'selected <b>line</b> in list' and your description says 'selected <b>event</b> in the list'. Which one is it you want to know?
For line you will use the event AT LINE-SELECTION and for event you will use AT USER-COMMAND.
Please reward and close if answered, if not, please revert back to the forum with more details.
Thanks,
Srinivas -
How to find out the users currently logged into ODI
Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota -
How to find out the tables from extract structures
Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
ThanksPl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri
Maybe you are looking for
-
Sending a Photoshop image to iPhoto
This sounds like something that should be easy but I am having a problem. I created an image in Photoshop and want to place it in my iPhoto library. Help
-
Dear all, we want to open the whole Portal Content (EP 7 SPS11) from a Mobile device (Microsoft Mobile 5 Internet Explorer). These devices are already in our intranet-network. We got the several mentioned iview error "iView is not compatible with yo
-
I use photoshop cs2 - When i use the "sketch filter - photocopy option" on a jpg/psd it comes up plain white (most of the time). Once in a while it works.. Can anyone give me a hint on how to fix this or a hint on what I'm doing wrong.
-
Sync center issue in Windows 7: sync conflict zeroing out remote file
Hi, I'm using Windows 7 RTM Prof Eng x64 on my laptop, and I'm making available offline a folder on a remote share with Offline files. The remote share is hosted on a Windows Server 2003 R2 Ent Eng x86 server. The server is a domain controller, but t
-
Where is the best place on the Web to learn Servlet/JSP with Tomcat for beginners?