How to find out what are in my startup?

My macbook has only 2 GB but since it's already 4 years old, I don't want to spend any more money to increase its memory, I'm just going to use it until it dies and goes to Mac Heaven.
This morning I checked the system memory and noticed that even when I was not online, it has 730 MB "active". So, I went to the harddrive and clicked open the Library and found the folder called "startup items", to my surprise, the folder is empty. My question to you is: how do I find out what are those "active" items?
Thank you in advance for your input.

Your operating system would be using at least that much RAM. It is a non-issue.
Stedman

Similar Messages

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps..

How to Find out what are the top 20 queries executed in the system

Hi Guru's,
I would like to know how to gather the information regarding the Top 20 queries used in the system per week, by a multicube.
Note: I am using BI 7.0 and also Statistics are turned on.
People have provided me the Cube name and table name last time but nothing seems to work.
I do not have the query names and I just have my multiprovider name and with the help of that, I want to find out what are all the queries which were executed related to that multiprovider.
Thanks and regards,

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

How to find out what are the functions supported by string class

Hi,
Can any one let me know how to find what are all the functions supported by the string class in standard(STL) library on solaris.
Regards,
Vignesh

1. Any C++ textbook that covers the Standard Library will tell you about the standard string class. A good tutorial and reference for the entire Standard Library is "The C++ Standard Library" by Nicolai Josuttis, published by Addison Wesley.
2. WIth Sun C++, the command
man -s3C++ basic_string
provides documentation for the default libCstd version of the Standard Library.
3. You could look at the <string> header itself. I don't recommend that approach.

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

How to find out what Oracle version?

Hi,
Could anyone tell me how to find out what Oracle version is on your AIX/Unix machine? It looks like Oracle Installer doesn't use the native OS installation(installp,pkgadd) process, so I can't use lslpp/pkginfo to find out what filesets are installed.
Thanks
HQ.

Hi!
As far ar Oracle version is concerned, you can find it at the database level after connecting to the database
select * from v$version;
i am not sure if there is someway to find at the o/s level.
Good luck
null

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it.

How to find out what user locked account

We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
Oracle version 8.1.7

Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
Justin

"Web'n'Walk III" Huawei dongle, how to find out what Huawei model it is?

I just bought this "web 'n' walk III" UMTS Modem (USB) made by Huawei. I want to instal it but do not know if the enclosed software is out of date (MobileConnectDriver(2.9.2)) and works under SL. Does anybody know how I find out what type of Huawei dangle it is so I can find the correct software?
any tips as to how to use this smoothly as the stick is to SIM locked and I will use it with a SIM from an other provider (Stick is branded by T-Mobile).

I worked out the model number, it is 'hidden' in small print on the back, in a larger number.

How to find out what has been restored to a database instance?

I'm using RMAN to back up and restore/recover. How to find out what has been restored/recovered to a database instance?
Oracle version is 11gR2 but compatibility is set to 10.
Edited by: 881656 on Aug 28, 2012 1:54 AM

select output
from V$rman_output
order by stamp;
select *
from V$rman_status
order by start_time desc;
Regards
Asif Kabir
Handle:      881656
Status Level:      Newbie
Registered:      Aug 25, 2011
Total Posts:      52
Total Questions:      *30 (30 unresolved)*
-- please close all the answered threads and mark your helpful post as correct/helpful

How to find out what generation my Classic is ?

Can anyone advise me how I find out what generation my iPod Classic is ? Is there a website I can check with ?
Many thanks,
Shell

Hi Niel, the article I get directed to, doesn't really explain the difference between 6th and 7th generation Classics. Is there anywhere (maybe on the Apple website) I can input the Serial Number and Part Number to be exact ?

How to find out what the geniric short forms stand for?

Hi if you see the ThreadLocal class in jdk1.6 it is written like this in doc. ThreadLocal<T> and if you see the method Class.forName() the return type is Class<?> i am just confused a littele bit. how to find out what this <T> and <?> stands for? I mean how do i know that what to pass in their place?

[Start from Here|http://java.sun.com/docs/books/tutorial/extra/generics/index.html]

How to find out what option you got

How to find out what option you got because i changed my option from option 1 to option 3 and they said that it will change 31st and i want to find out if it changed how do i do that?

Log on to bt.yahoo.com, and look under the "My Account" section. It tells you what package you're on.

How to find out what network an iphone is locked to.

How to find out what network an iphone is locked to.
Assist.

The previous owner/seller didn't provide this info?
What does it say at Settings > General > About > Carrier?

How to find out what are in my startup?

Similar Messages

Maybe you are looking for