How to find out what network your phone is locked to

How do I find out if my phone has been locked to a network

Ask whoever you bought it from or call AppleCare and give them the serial number of the phone.

Similar Messages

  • How to find out what network an iphone is locked to.

    How to find out what network an iphone is locked to.
    Assist.

    The previous owner/seller didn't provide this info?
    What does it say at Settings > General > About > Carrier?

  • How do I find out what network my iPhone is locked to, How do I find out what network my iPhone is locked to

    I just got an iPhone 3 online and it's network locked how do I find out what network it's locked to

    You may be able to call Apple Care and ask them. If it originated in the US, it is locked to AT&T.

  • How to find out what carrier is blackberry 8330 locked to?

    Hello,
    I've got a bunch of BB 8330's. Some of them have carrier logos, so I know which carrier they are from. But others have no logos, so I assumed they were unlocked. If I go to Options -> Advanced Options, there is no choice Sim Card, so I can't checked whether it is unlocked.
    However, I have a feeling they are indeed locked. I put a T-mobile card in, and it says that a mobile carrier is "CDMA Home Network". What does that mean?
    Also, on the back of the phone it says "Qualcomm 3G CDMA", but all of them have that written, so I'm not sure if it's relevant.
    Is there any way I can find out whether the phone is unlocked, or which carrier it is locked to?
    Thank you

    Hello,
    Refer:
    http://supportforums.blackberry.com/t5/Other-BlackBerry-Smartphones/8830-World-Edition-GSM-Unlock-an...
    There are likely many other threads here and elsewhere that discuss both how to find your VendorID(s) as well as where to find the carrier that it corresponds to.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can i find out what network my iphone is locked too

    I have an iPhone 3G.  I was told it was on AT&T and requested a factory unlock.  AT&T denied the unlock stating it was not an AT&T IMEI number.  How v

    Where did you acquire this iPhone? Ask the seller who it is
    locked to.
    If the iPhone has been hacked/modified/jailbroken to
    work on the AT&T network, any future attempts to unlock
    or update may render the iPhone unuseable - proceed
    with caution.
    Did you try to check unlock availability via the AT&T website?
    Perhaps the person you spoke to mis-keyed the number you
    gave him.

  • How do find out what your network password is if you forgot it?

    How do find out what your network password is if you forgot it?

    It should be in your Keychain. Find it in Keychain Access.

  • How can you find out what generation your iPod touch is?

    How can you find out what generation your iPod touch is?

    Hi,
    Here is help for the operating system:
    If you are locked to iOS 3 then you have an iPod Touch 1st Gen.
    If you are locked to iOS 4 then you have an iPod Touch 2nd Gen.
    If you are locked to iOS 5 then you have an iPod Touch 3rd Gen.
    If you are locked to iOS 6 then you have an iPod Touch 4th Gen.
    If you can get iOS 7 and have an iPhone 5 sized screen [bigger] you have the current iPod Touch 5th Gen.
    I assume since it says you have iOS 5.1.1 you have an iPod Touch 3rd Gen.
    Also, you may want to sync it so iTunes can tell you or you can look at the model number on the back.
    Hope this helped.

  • HT4582 hi I have bought an ipad mini which was advertised as unlocked, ipad has signal but says invalid sim, how to I find out what network it is locked to?

    hi I have bought an ipad mini wich was advertised as unlocked to any network, when I put nano sim from giff gaff in the ipad says invalid sim, how can I find out what network it is locked to?

    There is nothing on the iPad itself that can tell you. Did you buy it from a reputable retailer? You can try asking them.

  • How to find out what is the lock key for the computer

    How to find out what is the lock key for the computer?

    You don't.
    If you forgot or lost the password, all you can practically do is reset it.
    The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
    On Lion, you use the following technique to reset the Administrators password:
    Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
    Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
    In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

  • How to find out what has been restored to a database instance?

    I'm using RMAN to back up and restore/recover. How to find out what has been restored/recovered to a database instance?
    Oracle version is 11gR2 but compatibility is set to 10.
    Edited by: 881656 on Aug 28, 2012 1:54 AM

    select output
    from V$rman_output
    order by stamp;
    select *
    from V$rman_status
    order by start_time desc;
    Regards
    Asif Kabir
    Handle:      881656
    Status Level:      Newbie
    Registered:      Aug 25, 2011
    Total Posts:      52
    Total Questions:      *30 (30 unresolved)*
    -- please close all the answered threads and mark your helpful post as correct/helpful

  • How to find out what Oracle version?

    Hi,
    Could anyone tell me how to find out what Oracle version is on your AIX/Unix machine? It looks like Oracle Installer doesn't use the native OS installation(installp,pkgadd) process, so I can't use lslpp/pkginfo to find out what filesets are installed.
    Thanks
    HQ.

    Hi!
    As far ar Oracle version is concerned, you can find it at the database level after connecting to the database
    select * from v$version;
    i am not sure if there is someway to find at the o/s level.
    Good luck
    null

  • HT1391 Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    .from iTunes, go to View > Show sidebar
    From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All

  • How to find out what user locked account

    We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
    Oracle version 8.1.7

    Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
    AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
    Justin

  • "Web'n'Walk III" Huawei dongle, how to find out what Huawei model it is?

    I just bought this "web 'n' walk III" UMTS Modem (USB) made by Huawei. I want to instal it but do not know if the enclosed software is out of date (MobileConnectDriver(2.9.2)) and works under SL. Does anybody know how I find out what type of Huawei dangle it is so I can find the correct software?
    any tips as to how to use this smoothly as the stick is to SIM locked and I will use it with a SIM from an other provider (Stick is branded by T-Mobile).

    I worked out the model number, it is 'hidden' in small print on the back, in a larger number.

  • How to find out what generation my Classic is ?

    Can anyone advise me how I find out what generation my iPod Classic is ? Is there a website I can check with ?
    Many thanks,
    Shell

    Hi Niel, the article I get directed to, doesn't really explain the difference between 6th and 7th generation Classics. Is there anywhere (maybe on the Apple website) I can input the Serial Number and Part Number to be exact ?

Maybe you are looking for

  • How do I setup a quadrature applicati

    on to reload a zero on the z pulse while counting up AND reload the stripe count of my encoder (i.e 720) while counting down. I understand how the reload mechanism works in one direction but what about bi-directional??? I am using Traditional NI-DAQ

  • Adding Texture to 3D Image

    Hi, I'm trying to add this texture to the 3D object.  The image and vi are saved in the same folder. Not sure why it is not working.  Please see attached. Attachments: texture.vi ‏13 KB mac.jpg ‏165 KB

  • Create database

    Hi Experts, I am installing Solution manager EHP1 on SUSE Linux 10 , SP2 on  Database Oracle 10g . While Instlling , i am struck in the Phase "Create Database " Pls find the error screen shot  ERROR      2009-09-01 09:49:58.594            CJSlibModul

  • Thread Pool Problem

    Hi, I amhaving problem with a thread pooling my code once allocates a thread to a user then never is able to find that it is idle. the code is some what like this. public class foo extends Thread{ pubblic void setPrimeData(Hashtable data){ //sets the

  • Problem with WebCenter tutorial - JDev 11.1.1.3, WCF 11.1.1.3.0.100707.1000

    Hi, I'm working through the WebCenter tutorial in the FMW documentation. All has worked fine until I reached step 8 (Add the People Connections Service to Your Application) in chapter 5 (Adding Oracle WebCenter Services to Your Application). When I a