How to find out what users have an order open in change mode
Is there a table I can easily query to determine which user has a specific order (VBAK) open in change mode?
Will give points of course.
HI,
Use this function module. This will return you the list
CALL FUNCTION 'ENQUEUE_READ'
EXPORTING GCLIENT = GCLIENT
GUNAME = GUNAME
GNAME = GNAME
GARG = GARG
IMPORTING SUBRC = SUBRC
TABLES ENQ = ENQ
Thank
Mahesh
Similar Messages
-
How to find out what user locked account
We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
Oracle version 8.1.7Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
Justin -
Find out what users have no "Primary Extension"
Is there a way to determine what users on a system have no Primary Extension set? There isn't a Primary Extension field in the search criteria of the End Users page.
This is CUCM 8.6.2.I don't know any pre defined report for that.
If your familiar with the CUCMs CLI you can run an SQL query to get this.
I’ve played around a little bit and created this query:
run sql select userid from enduser where userid NOT IN (select u.userid from enduser as u inner join endusernumplanmap as nm on u.pkid=nm.fkenduser inner join numplan as n on nm.fknumplan=n.pkid)
Be careful when playing around with SQL queries, always keep an eye on CPU and memory usage of CUCM.
hope that helps -
How can you tell what users have which reports open in Infoview
Hi!
In Crystal Server XI, is there any way that you can see what reports are currently being viewed in Infoview and by what user? Or a history of how many times a report has been viewed so that I can tell which reports are not used that often and maybe adjust the schedule or get rid of them.
Thanks,
CyndiCyndi,
The method to track the information you are seeking is called Auditor. Auditor is either installed at server software initialization or the install can be performed after you're deployed by re-installing the software and choosing only the Auditor piece. It is best to study the guide (xir2_bip_auditor_en.pdf) prior to launching out on this endeavor.
Thanks,
John -
How to find out what version of iTune and iPhoto I have?
How to find out what version of iTune and iPhoto I have?
For each application, launch it and choose About from that application's menu, or control-click its Dock icon, choose Show in Finder, control-click that, and choose Get Info.
(76257) -
TS2755 How can I find out what devises have been used to log into using my Apple ID?
How can I find out what devises have been used to log into my Apple ID?
You can't. If you think someone has change your password. If someone complains you will know who it is.
-
HT4436 how do I find out what I have stored in the Cloud
How do I find out what I have stored in the cloud? Also I have an update (6.1.1) for my 4S I-phone but can get it to download - even when my phone is connected to my computer. Can anyone help?
You can see some of your data by going to icloud.com from a computer and signing into your iCloud account. Other data can only be viewed on an iOS device or computer that is syncing with the account.
What do you mean when you say you can't "get it to dowload"? -
how do i find out what computers have been authorized for my account? I have had one stolen and one died but my account shows 5 pcs authorizied? how do i unauthorize a computer not in my hands?
Iphones do not count. Computers only.
There is no way to find out what computers.
Deauthorize all, then authorize the active computers. -
How do I find out what I have recently purchased from the app store and iTunes I.e films, songs, albums & apps?>.<
On your iPad, you can open iTunes and click on Purchases. Plus, when you purchase something from iTunes, you should get an email with the purchase details to the email you set up as your Apple ID. They sometimes take a day or two and with the volume of things being purchased with the millions of new iPads out there in the last 3 days, that may be a bit longer. I keep every receipt I get for future reference.
-
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find out which Tables have been accessed without looking at the SQL query ?
Hi,
I would like to know is there a way to find out what queries have been executed and on which tables without looking at the SQL query.
I have an old C++ code which calls some library functions to access the Oracle database. The source code for the library is not available to me yet. The functions selects/updates/deletes and inserts based on some input parameters I give. I do not know which tables it affects. How do I find out the actual SQL query and/or the tables it accesses ? I was told about V$SQL table that
has the most recently executed queries, but
I did'nt see any queries connected to my process.
Could anybody help me on this ?
Thanks
Jagdeep
[email protected]
nullPRECISE/SQL can help you if you have access to it
2nd option can be that turn on SQL_TRACE
Run executable of ur c++ program
it will create a trace file in user_dump_dest
and then using TKPROF u can see all quesries and their plan also.
HTH
Gagan Deep Singh
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by (jagdeeps):
Hi,
I would like to know is there a way to find out what queries have been executed and on which tables without looking at the SQL query.
I have an old C++ code which calls some library functions to access the Oracle database. The source code for the library is not available to me yet. The functions selects/updates/deletes and inserts based on some input parameters I give. I do not know which tables it affects. How do I find out the actual SQL query and/or the tables it accesses ? I was told about V$SQL table that
has the most recently executed queries, but
I did'nt see any queries connected to my process.
Could anybody help me on this ?
Thanks
Jagdeep
[email protected]<HR></BLOCKQUOTE>
null -
How to find out which user create folder
how to find out which user create folder in shared drive?
Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
How to find out all user exits edited
Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AMHi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM -
How to find out what is the lock key for the computer
How to find out what is the lock key for the computer?
You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu. -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards
Maybe you are looking for
-
How can i change my appleid username from one email address to another
I seem to have one email address ([email protected] ) showing on my iphone, but the email attached to the itunes on my pc (and my store credit card) is [email protected] How do I change the iphone email to the itunes email? Thanks
-
Dear, I need to replicate the IDM production to build the IDM test environment. I have the OIM 11.1.1.5.0 in production with lots of custom codes. I have two approaches: approach1: Manually deploy the code through Jdeveloper and export and import all
-
Error from External Tax system in CRM Quotation
Hi, We have a Quotation in CRM, as soon as we click on 'Edit' button in WebUI, We get error "External Tax System: An error occurred while calculating tax. This may be an incorrect use of the calculation engine. Please contact your software vendor. Er
-
Flex 2: stuck in sleep/battery led doesn't turn on
Hi Everybody, My laptop no longer will turn on and was wondering if anyone had this experience in the past. With all my materials on it, I hesistate to ship it out for 3 weeks. Please advise.
-
How do I 'un-pin' a contact from the start menu of...
I screwed up and pinned a couple of contacts. Now their facebook image is one of the tiles on my main menu. Nothing I've tried seems to delete the pin. Anyone know how to do it? Solved! Go to Solution.