How to find out where R/3 report data are stored

Hy,
I am new in BW.
I have SAP R/3 report, I need to transfer that report data (all table data) to BW.
Could You explain me step by step how i can do it?
How to find out where data are stored?
Thank you very much!
Regards,
Arunas

Hi Arunas,
This topic has been discusssed here earlier. Check these links:
BW solution for ABAP Reports
BW reports
Bye
Dinesh

Similar Messages

  • How do I find out where iTunes thinks missing files are?

    I have several hundred "missing" files in my iTunes library but they are all actually on the computer. But I don't remember where the were previously. I add dozens of songs at a time to my library all the time and there is no Earthly way for me to constantly remember where they were before. I don't just want to reimport the files because I have several hundred playlists with these files and it would be completely stupid to edit them all one at a time when all I need to do is to move them back to where iTunes thinks they should be. So where is that? The Windows media player has a column that displays file location. Why doesn't iTunes? (This is so stupid. It makes things -not just this- so much easier when you have the file location in the music list in your music player.)
    Is there a way to find out where iTunes thinks the missing files should be at?

    Chris CA wrote:
    How do I find out where iTunes thinks missing files are?
    The exclamation mark means ITunes doesn't think they are anywhere.
    If you right click - get info on a song then view the Info tab, you will see where iTunes last used it from.
    I'm not a newbie. I know quite a lot about iTunes. You sound like you don't though because if you did you would know that this is not true. If you "right click - get info on a song" (pressing cancel to the Locate popup) "then view the SUMMARY (not info) tab" you will see "Not Available" where the file location usually is. I wouldn't have asked this question if I hadn't gone through the steps already.
    Thanks for trying though. Next time, please try the advice before you give it.
    I add dozens of songs at a time to my library all the time and there is no Earthly way for me to constantly remember where they were before
    You should not have to remember anything about where they were.
    I agree.
    Are you always moving them around?
    When I install a new hard drive. Yes. I generally keep everything organized and I let iTunes keep the folder organized but several years ago I used windows media player to organize my media.
    Frankly I don't know HOW the recent songs/videos/etc. go missing. But some do. Maybe I accidentally move a folder without realizing it. Mistakes happen. Then I need to move it back but since I didn't know I did it in the first place I can't possibly be expected to remember where I moved it from.
    Do you have iTunes prefs -> Advanced Keep ITunes music folder organized ticked and Copy files to iTunes ... ticked?
    *OF COURSE!* Again, I'm not a newbie.
    I have several hundred playlists with these files
    Why would you have several hundred playlists?
    I don't mean to sound rude but you sound like an Apple fanboy. Are you trying to tell me how I should use my own program? The answer to the question is I am a salsa instructor/DJ and I am constantly adding songs and videos to my library. Every month I have various salsa events, classes and performances that I do. I use my iPhone for the music. I need to maintain the playlists because students/teachers/studios/clubs/bars/churches/etc. call me back and want a repeat of the great salsa night I gave them a year ago. Naturally my playlists are highly organized into folders. So, I still have them and I need them.
    Apple has its own ideas about how people should use its stuff but everyone is unique and our needs therefore are unique too. Apple doesn't realize this and still wants us to do things "the Apple way" even though "the Apple way" only works well for people who want their hand held through everything. This is why I say you sound like a fanboy. You don't know my situation and question if I need hundreds of playlists. I do.
    I just need an answer to the question.
    Thank you for your reply though. It gave me hope, for a time.

  • How to  find out where sap error messages stored...

    How to  find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

    Hi,
    I also got the same message when that message no is not there
    E:SABAPDOCU:000 test 
    yours is S-type and message id ZY and message no 127
    127 is not there either change the no  or create the same
    Regards
    Shiva

  • How to find out where sap error messages stored in our system

    How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

    Are you interested in WDA messages ?
    The set a breakpoint in METHODS IN class CL_WDR_MESSAGE_MANAGER.
    Then use call stack (default desktop 2 in debugger) to see where message is added to message manager.
    regards
    phil

  • How to find out where the tablespace physical file *.dbf ?

    How to find out where is my tablespace physical file *.dbf ?
    Can I increase tablespace_name: TEMP and how to increase it.
    First, I need to know where is the TMP *.pdf file, am I right?
    Thanks in advance

    This forum is for issues with the SQL Developer tool. You'd get more response in the General Database forum.
    Have fun,
    K.

  • How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

    Hi All,
    We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
    Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

    Hi,
    Here you go..
    1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
    Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
    2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
    3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
    This step you get query reference sheet or column or query general UUID for next step.
    4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
    Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
    Hope this helps.
    Please keep in mind, it might take more time depends on how many query elements you have in the system...
    Comments added for better DB performance by: Arun Thangaraj

  • How to find out where an alias is defined

    How can I find out where an alias is defined on my system? I am referring to the kind of alias that is used within a Terminal session launched from Mac OS X (10.6.3).
    For example, if I enter the alias command with no parameters at a Terminal command prompt, I get a list of aliases that I have set, for example, this is one of them
    alias mysql='/usr/local/mysql/bin/mysql'
    However, I have searched all over my system using Spotlight and mdfind in various startup files and so far can not find where this alias has been defined ( I did it a long time ago and didn't write down where I assigned the alias).

    Thank you. I must have missed that before. It looks like the alias definitions in my case are in the file ~/.bash_profile.

  • How to find out where a value is stored

    Hi,
    i entered something in HR Area infotyp 0031, i expected to find those entries in table pa0031, but this table remains empty. How can i find out where sap stores those values?

    press F1 on the field where u typed the value. click on technical info and get the table and field name.
    in most cases it might be structure. either way, go to se11 and type the table/structure name and then search for the field name in that table.
    then dbl click on the data element and click on the where-used button.
    now select table entries and start looking for all the tables where the field is present. go to each table and check for the number of table entries and see if the value u entered has been caputred in that table or not.
    hope that helps.
    else u can revert back
    regards,
    pk

  • HT201472 Is there any way how to find out where a particular device was when it last went online if longer than 24 hours ago?

    One Mac Book Air was stoilen frm me, I can still see it on Find my Iphone and can see that it has been renamed. The computer was offline for longer than 24 hours, so I am wondering if there is any way how I can find out it's last online location?

    No, you cannot find out where the computer has been. Find My Mac only shows you were the computer is right now if it is online.
    I strongly recommend you change all your internet passwords immediately, notify the police (do not try to recover your MBA yourself), and your insurance company so you can get reimbursed and buy a new Mac. Once you have done all this go back to Find My Mac and click the "Erase" button.

  • How to find out if a query(report) has a role.

    I want to find out if a query(report) has a role and what the role name is.
    Do anybody know a function or a table?

    goto SU01 , give ur username , click on roles tab , and click F1 on role field , then goto technical attributes , and use where-used-list of that dataelement , u will lot of tables on Roles and its attributes
    You can look up AGR* tables in SE16
    Please give me reward points if it is useful.
    Thanks
    Murali Poli

  • How to find out where a variable has been used?

    How can I find out where a variable has been used within a package/interface/procedure?
    Should I check it using repository's internal tables?
    Thanks

    Hi,
    you have to make some queries to find variable used in which ODI object.
    like, it fetch the variable with scenario name and scenarion can serve your need.
    select v.i_var,v.var_name,s.scen_name from
    ODEV91119_ODI_WORK.snp_var v,ODEV91119_ODI_WORK.snp_scen s
    where
    s.i_var=v.i_var
    and s.scen_NAME='V_BTCH_NAME'
    and agree with SH answer
    Thanks

  • How to find out where my code is running

    Our software can run in EJB or Web Container. Based on its environment it does things differently, For example connection pooling, Transaction Management, etc. Problem is that I cannot figure out a way to make my software smart enough to find out where it is running. Its caller has to pass it a parameter telling it where it is running. I don't like it at all. Can someone please help me to understand what I can do give this functionality to my software i.e to figure out by itself if it is running in WEB container or EJB Container.

    Is there maybe a tell-taling class in one onvironment, which is not there in the other one?
    try {
    Class.forName("tell.taling.one";
    //okay
    catch (Exception e) {
    //oops - not found
    }

  • How to find out where used list of Table or T-code

    Dear ABAP gurus
    I know many of you have done this several times.
    wish to find out which Transaction code INSERTs the data into the table IHPA.
    I did the where  used list - SE11 ( for specific key work called INSERT ).
    Used the Table called D010TAB which has some information.
    Vise versa if I know a T-CODE , how to know which tables it read  & Modify...
    any better procedure than spending hours in research...
    I found similar custom program to find USER EXITS ...here..., looking soething similar...
    [http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
    thank you for your help
    Edited by: Raj Anvesh on Aug 3, 2011 9:58 PM

    Hi Anvesh,
    Maybe the data INSERTION is happening by BAPI,
    So just try to look for the concerned BAPIS.
    ECP_SRV_PARTNERS_IHPA
    IREP1_IHPA_ADRNR_PRE_FETCH
    IREP1_IHPA_ADRNR_READ
    MAP2E_DIIHPA_TO_PARTNER
    MAP2E_IHPAVB_BAPI2080_NOTPARTE
    MAP2E_IHPAVB_TO_BAPI_IHPA
    MAP2E_IHPA_BAPI2080_NOTPARTNRI
    MAP2E_IHPA_M_BAPI2080_NOTPNRI
    MAP2I_BAPI2080_NOTPARTNRI_IHPA
    MAP2I_BAPI_IHPA_TO_IHPA
    PM_DB_FILL_DIIHPA
    PM_PARTNERCOPY_FILL_XIHPA
    PM_PARTNER_DELETE_XIHPA
    PM_PARTNER_GET_XIHPA
    PM_PARTNER_PUT_XIHPA
    PM_PARTNER_REFRESH_XIHPA
    these are the bapis which are dealing with the IHPA table,
    Segregate them as needed and then go to the std program
    Revert for further clarification.
    Thanks
    Sri

  • How to find out where a query is used in a FMS and or Form?

    Hi Experts,
    How can I find out quickly where a query is used in which fms and / or form?
    thx,
    Richard

    Hi Richard,
    Try this:
    SELECT T2.FormID, T2.ItemID, T2.ColID,
    T1.CatName,T0.Qname FROM [dbo].[OUQR] T0
    INNER JOIN [dbo].[OQCN] T1 ON T0.QCategory = T1.CategoryId
    INNER JOIN [dbo].[CSHS] T2 ON T2.QueryId = T0.IntrnalKey
    ORDER BY T2.FormID
    Thanks,
    Gordon

  • How to find out where a table is used in the code ?

    I have a huge database, and I am adding a column to a table...
    is there a query to find out if this would impact the code ? I mean I want to find all the places in the code with
    insert into mytable, or update mytable.....
    how to include both insert into mytable, and update mytable in dba_source ?

    Use DBA_DEPENDENCIES:
    select owner,name,type from dba_dependencies where referenced_name = 'TABLE_NAME'
    and referenced_owner = 'TABLE_OWNER';For example:
    SQL> select owner,name,type from dba_dependencies where referenced_name = 'EMP'
      2  and referenced_owner = 'SCOTT';
    OWNER                          NAME                           TYPE
    PUBLIC                         TABLE1                         SYNONYM
    SCOTT                          SELECT_EMP                     PROCEDURE
    SCOTT                          EMP_DEPT_VW                    VIEW
    SCOTT                          PP                             SYNONYM
    SCOTT                          EMP_MV                         MATERIALIZED VIEW
    SCOTT                          EMP_VIEW                       VIEW
    6 rows selected.
    SQL> However, keep in mind DBA_DEPENDENCIES stores statis references only. If your code references table in question in dynamic SQL you will have to parse DBA_SOURCE and in some cases, even that will not give you all answers.
    SY.

Maybe you are looking for