How to find out wheter user is using WINGUI or SAPGUI

Is there any ABAP function module or clsas method to check the GUI TYPE?
I'd like to know whether the end user is using WINGUI or SAPGUI.

have a look at BDS_GET_GUI_TYPE
ICL_GET_GUI_TYPE
reward points if helpful

Similar Messages

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

How to find out which User id used to import Transport Request thru STMS ??

Dear Experts we have 6 BASIS Consultants in our org with STMS authroizations.
In every day we review Imported Transport request thry Import History Option in STMS.
Our requirement is which request is imported by which BASIS Consutlant thru STMS?
Thanks for your replies in advance
Regards

Hi,
You should be able to see the "owner" of a transport request under the import history in STMS. If you need the user too you can choose the menu "Edit --> Display More".
Best Regards,
Srividya.R

How find out which user is using which company code?

Hi Gurus,
I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
Is it possible to get it from a single table or Tcode?
Best Regards,
Rahman

Hi,
Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
Regards,
Rahman

How to find out internet explorer version ,using a java program?

How to find out internet explorer version ,using a java program?

Browser version from java?....you must be referring it from some web application....rite?
You can read the User-Agent header using request.getUserAgent() or request.getHeader("User-Agent") in your jsp or servlet.
for more details pls refer:
http://www.jguru.com/jguru/faq/view.jsp?EID=12253

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find out which keywords were used to create a smart album?

Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>

b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown.

How to find out which user create folder

how to find out which user create folder in shared drive?

Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

How to find out the users currently logged into ODI

Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.

Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota

How to find out what user locked account

We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
Oracle version 8.1.7

Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
Justin

How to find out all user exits edited

Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AM

Hi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

How to find out names of reports using a particular view

hi guys,
i am newbie here, i jsut want to know how to find out which reports are using a particular view
many thanks in advance for your help

If you go to the Properties for the Folder in Discoverer Administrator, there is a Dependents tab that should list any workbooks using the folder. This only works for workbooks saved to the database, so won't help with any created using Discoverer Desktop. If you are gathering statistics and have the The Discoverer V5 EUL business area and its workbooks installed, it can tell you about Folders Used as well. It contains information about queries run whether the workbook is saved to the database or to the file system, but wouldn't contain inforamation about workbooks that had been created but not run.

How to find out if I am using a 32 bits or 64 bits version of JRE?

How to find out if I am using a 32 bits or 64 bits version of JRE?
If I have 2 instances of Java installed in 2 seperate directories, one 32 bits and other 64 bits on Linux. How do I identify which directory holds which version?
Is there any command that can output this info?
Regards,
Billamama

With a Sun JDK or JRE, you can use java -version:
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Server VM (build 1.6.0-b105, mixed mode)
... switch to the 64-bit JDK ...
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0-b105, mixed mode)
The last line says "64-Bit."

How to find out wheter user is using WINGUI or SAPGUI

Similar Messages

Maybe you are looking for