How to find out whether USER-EXIT is active or not

Hello!
How can I  find out whether USER-EXIT is active or not ?
I set a break-point at these points and nothing happens
if I want save my daocument ???
Why
PERFORM USEREXIT_SAVE_DOCUMENT.
PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Ragards
Ilhan

Hi Ilhan
The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
When placing breakpoints, don't use <b>Breakpoints > Breakpoint at > Statement...</b> and enter
PERFORM USEREXIT_SAVE_DOCUMENT
because you won't get any hits since the function module names are stored dynamically.
Rather use <b>Breakpoints > Breakpoint at > Function Module...</b> and enter
USEREXIT_SAVE_DOCUMENT
for a better chance of hitting the breakpoint.
Cheers
Lyal
Message's terrible grammar was edited by:
        Lyal Schumann

Similar Messages

  • How to find out the user-exits?

    hi.
    how to find out the user-exits?
    regards
    eswar.

    Hi,
    *& Report  ZEXITFINDER
    *report  zexitfinder.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Regards

  • How to find out appropriate user exit

    Hi,
    I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
    Thanks
    Basu

    Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu:  Utilities -> SAP enhancements.
    This will only give you the CMOD user exits.
    There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
    Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

  • How to find out all user exits edited

    Hi All,
    Would you know how to find out all user exits have been ever edited?
    Can we find out those user exit by some tcode or table?
    Thank you very much
    Best Regards,
    Calvin
    Edited by: Sam Sum on Mar 2, 2009 5:09 AM

    Hi,
    Just try this in your system.
    Go to SE38 and give ZX* and press F4.
    Have a look at table MODATTR to find the active projects in your system.
    Regards
    Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

  • How to find out the user exit is implemented

    Hi All,
    Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
    I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
    Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
    I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
    Thanks,

    Hi Krishna/TW,
    Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
    Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
    Example: In STO process user is able to increase the  qty in delivery. As per the client requriement system should not allow.
    This is not possible in standard to control even after maintainig  check over delivery field in 0VLP.
    For this comapny has already implemented one enahnceament.
    User Exit : USER EXIT_READ_DOCUMENT
    Program: MV50AFZ1
    like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
    So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
    I hope now  am clear with my requirement.
    Thanks in advance.

  • How to find out FICO user exits that are used by User

    How to find out the FICO user exits that are used by user.

    Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
    pls assign points if helpful as a way to say thanks.

  • How to find weather the user exit is active?

    i need to list out all Userexits which are implimented and activated
    so that we can do the same changes in other system also. how to do this?
    i have checked table MODSAP but i think its giving list of all user exits without checking its active/inactive.

    Hello
    1. Goto table MODATTR with status = 'A' (active). You will have list all active projects.
    2. Goto table MODACT with NAME = MODATTR-NAME (for each record from MODATTR). You will have all enhancements for particular project.
    3. Goto table MODSAP with NAME = MODACT-MEMBER. You will have all exits for project.

  • How to find out whether a particular changed by some user

    Hi gurus,
                I am just trying to figure it out how to find out whether a particular user has changed a particular table or not. In other words table changes history. If any of you know about it please let me know.
    Thankyou
    Jason

    Jason,
      Ajay mentioned changes to Table not for Data. If you are looking for Changes to Table Data... you need to check System Log SM21. check for that perticular period.
    Nagesh Ganisetti.
    Assign points if it helps.

  • How to find out whether the system user is a vendor or a purchaser

    Hi,
    I am working in SRM 5.0. I have a requirement that some fields of Bid invitation can be visible by purchaser but not to bidder.
    How to find out whether the system user (user id though which system logged in) is a vendor or a purchaser. Kindly help me to resolve this issue.
    Sushmita Singh

    check his role.
    is surrogate bidding available for that bidder.
    via surrogate bid , purchaser can submit bid on behalf of the bidder.
    masa is correct
    pposa_bbp - search via user . so he might be  a purchaser.
    maintain business partner -supply your bidder bp number -edit
    go to bidder data .Under bidder data you must flag "PERMIT PROXY BIDDING"
    regards
    Muthu
    br
    muthu

  • How to find the ME29N 'USER EXIT' when our save the release PO after.

    How to find the ME29N 'USER EXIT' when our save the release PO after.
    which user exit will be used?
    thanks.
    alex.

    Hi,
      process :
        go to tranx code :   ME29N ,
           System---->Status , here copy the program name (SAPLMEGUI),
         go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
         tranx code : CMOD ,  Utilites--->Sap Enanchement,
                                         specify the package name : ME
                                          and execute, displays a list of exits ,
                                 and find out our suitable exit based on requirement.
    check these :   EXIT_SAPMM06E_021
    reg
    Siva

  • To find out appropriate user exit/ badi for transaction VT01n

    Hi,
       I have the following requirement.
    Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document.  The rules for populating the value (SO, ST, PO and RA) are as follows:
    If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
    If all of the orders are STO orders, then the Cass shipment type should be "ST",
    If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
    If all of the orders are customer return orders, then the Cass shipment type should be "RA".
    I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
       Thanking in advance to give your suggestion in order to resolve it.
    With regards,
    Ajit.

    Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Just for your information the User exits available for VT01n are
    MV56AINI            Initialization of transaction control for transportation          
    V56AFCCH            Shipment processing: Check function code allowed                  
    V56AGTAR            User Exit for Filtering Shipping Unit Calculation                 
    V56ARCHV            Customer-spec. checks for archiving shipments                     
    V56ATKTX            Change the number of lines for text input in shipment             
    V56BMOD             Transportation processing: Field modification                     
    V56DISTZ            Shipment Processing: Determine Distance                           
    V56FCOPY            Shipment processing: Copy delivery data                           
    V56FSTAT            Shipment processing: Activities when setting a status             
    V56L0001            Status of Shipments for a Delivery                                
    V56LDELI            Read Delivery Data for Shipment Processing                        
    V56LOCID            Shipment Processing: Determine Location Identification            
    V56MVT04            Extensions for Collective Processing of Shipments                 
    V56SLDET            Shipment processing: Leg determination                            
    V56TDLIF            Filter Delivery Items for Shipment                                
    V56UCHCH            Shipment processing: Check whether changes were made              
    V56UCHCO            Check shipments are complete                                      
    V56UDLUP            Obsolete as of 4.6C: Delivery Update on Delivery Routines         
    V56UNUMB            Shipment number allocation                                        
    V56USTAT            User-individual definition of transportation planning status      
    V56USVDO            Update new objects for transport                                  
    V56USVDP            Preparation for updating new objects for transport?               
    Award points if helpful..
    Thanks

  • How to find out the user who has created  a new field in the custom table.

    How to find out the user details who has created  a new field in the custom table.
    Thanks,
    Joan

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • How to find out which user create folder

    how to find out which user create folder in shared drive?

    Hello,
    you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
    http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
    http://support.microsoft.com/kb/310399
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • How to find out the users currently logged into ODI

    Hi all,
    How to find out the users currently logged into ODI Work Repository?
    Thanks.

    Hi,
    It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
    Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
    I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
    Thanks,
    katukota

  • How to find the exact user exit for our requirement?

    Dear Mr. keerthi,
    can you please explain me how to find the exact user exit for our requirement?

    Hi sandip
    There is more than one method in which you can check for user-exits.The following method is used very often.
    <b>How to find the exact user-exit for your requirement.</b>
    1.     You can check the user exists using transaction SE85.
    2.     Repository Information System -> Enhancements -> Customer exits
    3.     You can search the user-exits by package name.
    4.     Double click on each exit name to check the function module exits.
    <b>The procedure to find the package name.</b>
    Execute transaction SE93 
    Enter the tcode of the transaction for which you want to check the user exit.
    Example: if you want to find the user-exit for purchase orders while changing, enter ME22n  and press display.
    You will get to see the package name
    But you need to confirm that the user exit will get triggered at the appropriate event.
    ( example: you might want some validations to be done ON SAVE of a purchase order)
    <b>Checking if the user-exit is getting triggered or not.</b>
    1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
    2.     Click on where used button. In the pop up that immediately appears choose only programs .
    3.     You will get a list of programs. Double click on the program name.
    4.     You will get the list of location where this function module user exit is used.
    5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
    6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
    regards,
    Prasad

Maybe you are looking for