How to find out which archived logs needed to recover a hot backup?
I'm using Oracle 11gR2 (11.2.0.1.0).
I have backed up a database when it is online using the following backup script through RMAN
connect target /
run {
allocate channel d1 type disk;
backup
incremental level=0 cumulative
filesperset 4
format '/san/u01/app/backup/DB_%d_%T_%u_%c.rman'
database
}The backup set contains the backup of datafiles and control file. I have copied all the backup pieces to another server where I will restore/recover the database but I don't know which archived logs are needed in order to restore/recover the database to a consistent state.
I have not deleted any archived log.
How can I find out which archived logs are needed to recover the hot backup to a consistent state? Can this be done by querying V$BACKUP_DATAFILE and V$ARCHIVED_LOG? If yes, which columns should I query?
Thanks for any help.
A few ways :
1a. Get the timestamps when the BACKUP ... DATABASE began and ended.
1b. Review the alert.log of the database that was backed up.
1c. From the alert.log identify the first Archivelog that was generated after the begin of the BACKUP ... DATABASE and the first Archivelog that was generated after the end of the BACKUP .. DATABASE.
1d. These (from 1c) are the minimal Archivelogs that you need to RECOVER with. You can choose to apply additional Archivelogs that were generated at the source database to contininue to "roll-forward"
2a. Do a RESTORE DATABASE alone.
2b. Query V$DATAFILE on the restored database for the lowest CHECKPOINT_CHANGE# and CHECKPOINT_TIME. Also query for the highest CHECKPOINT_CHANGE# and CHECKPOINT_TIME.
2c. Go back to the source database and query V$ARCHIVED_LOG (FIRST_CHANGE#) to identify the first Archivelog that has a higher SCN (FIRST_CHANGE#) than the lowest CHECKPOINT_CHANGE# from 2b above. Also query for the first Archivelog that has a higher SCN (FIRST_CHANGE#) than the highest CHECKPOINT_CHANGE# from 2b above.
2d. These (from 2c) are the minimal Archivelogs that you need to RECOVER with.
(why do you need to query V$ARCHIVED_LOG at the source ? If RESTORE a controlfile backup that was generated after the first Archivelog switch after the end of the BACKUP ... DATABASE, you would be able to query V$ARCHIVED_LOG at the restored database as well. That is why it is important to force an archivelog (log switch) after a BACKUP ... DATABASE and then backup the controlfile after this -- i.e. last. That way, the controlfile that you have restored to the new server has all the information needed).
3. RESTORE DATABASE PREVIEW in RMAN if you have the archivelogs and subsequent controlfile in the backup itself !
Hemant K Chitale
Similar Messages
-
How to find thead 2 archive log when i recover from 2-node RAC to single
I backup 2-ndoe RAC and restore to single - node
Control file created.
SQL> recover database iuckup controlfile
SQL> recover database using backup controlfIle;
ORA-00279: change 12100176131169 generated at 07/06/2013 16:36:57 needed for
thread 1
ORA-00289: suggestion : /arch/hop1_566085708_1_212692.dat -- Oracle suggest
ORA-00280: change 12100176131169 for thread 1 is in sequence #212692
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
arch/sch1_566085708_1_212692.dat --- I input
ORA-00279: change 12100176131169 generated at needed for thread 2
==> Oracle didn't suggest thread 2 archive log file/
How can I find ?You have to query V$ARCHIVED_LOG for THREAD# 2 on the source database to find the first archivelog where 12100176131169 is less than the NEXT_CHANGE#
select SEQEUNCE# from V$ARCHIVED_LOG where THREAD#=2 and 12100176131169 between FIRST_CHANGE# and NEXT_CHANGE#
Once you provide the Sequence# and file name for the first Thread 2 file, the RECOVER command will automatically generate the expected file name for the subsequent archivelogs (of both threads).
Hemant K Chitale -
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level. -
How to find out which type of the driver is used in our application?
Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
PhoenioxHi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
for(int i=0;i<drivers.size();i++)
Driver driver = (Driver)drivers.get(i);
String driverName = driver.getClass().getName();
System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath -
How to find out which server is running on which port
hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanthThe best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation). -
How to find out which keywords were used to create a smart album?
Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown. -
How to find out which object on a JPanel was clicked...
I have a JPanel that contains about 200 other small JPanels(only 8 are visible at any one time), and a JButton(with Visible set to false).
When one of the small JPanels is rightclicked i want to know which one was clicked so I can add the JButton to it (set theJButton Visible on the JPanel that was rightclicked). When the JButton is clicked, it will hide the JPanel it was on and hide itself again.
I added a MouseListener(MousePressed) to the main Jpanel but I dont know how to find out which of the smaller JPanels was clicked. I would Also need to know how (in the ActionEvent for the JButton) the JButton knows which JPanel it is on so it knows which one to delete.
------------------------------------------------------------------CODE
void JPanel1_mousePressed(MouseEvent e) {
if ((e.getModifiers() & e.BUTTON3_MASK)!=0){
------------------------------------------------------------------CODE
void JButton1_actionPerformed(ActionEvent e) {
------------------------------------------------------------------CODE
Can this be done or should I add a MousePressed Listener to each of the 200 small JPanels and create a JButton for each of them??
Any Info Appreciated... Thanks....Here you get a hint, hope have added all mouseListener as well and registered....addMouseLi...etc
// many JPanels here...
JPanel clickedPanel; // a reference only
// In mouse Click..
public void mouseClicked( MouseEvent e ){
clickedPanel = e.getSource( );
clickedPanel.add(new JButton("Look, I am Added") );
} // it is Only HINT, a working HINT -
How to find out Which SAP programs are affecting Which Z programs?
Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
VishnuDo we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu -
How to find out which objects are at the end of the datafiles
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/ -
ADF: How to find out which query has taken what time?
Hi,
I have an ADF application which has many SQL queried running on each button click/page load, so how to find out which query is taking what amount of time? So that i can identify the long running queries and modify them to improve the application performance.
Thanks in advance.Hi,
As suggested by Timo,you need to start tracing on oracle.jbo package for getting the SQL queries.But I think the second option suggested by him would be better.You will have to override executeQueryForCollection method in VO Impl class .Pseudo code would be
@Override
Take start time
super.executeQueryForCollection
Take end time -
How to find out which job is calling package
Respected sir,
How to find out which job is calling my package. Please help me regarding this.
Regards,
user570124Please read about [url http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_util.htm#i997163]DBMS_UTILITY.FORMAT_CALL_STACK in the manual.
or [url http://asktom.oracle.com/tkyte/who_called_me/index.html]this routine from Tom Kyte may be what you are looking for.
Regards,
Rob. -
How to find out which plugin is missing fro mthe website: http://web.it.nctu.edu.tw/~twli/interactive/scr_tutf.htm?
After looking at one similar question found in mozilla support and answered by jscher2000 (https://support.mozilla.org/en-US/questions/957655), I have found out I have to look for either <object or <embed. What I found is : <embed width="100%" height="100%" messagecallback="parent.frames.MANIPULATIONS.AppendMessage" spinfps="15" spiny="30"
What do I have to do now?This big1.mol (and possibly big2.mol) file is loaded in the embed plugin object that is opened in a iframe, so you can right-click the plugin area to check the embed code.
*http://web.it.nctu.edu.tw/%7Etwli/interactive/big1.mol
*http://web.it.nctu.edu.tw/%7Etwli/interactive/big2.mol -
How to find out which Badi is triggering in which transaction
Hi SAP gurus,
Can any one tell me How to find out which Badi is triggering in which transaction.
If I have a BADI . I want to know in how many transaction it will trigger.
Can you help me in this issue. Its very important and urgent.
Points will be rewarded.
Thanks,
Satish.Hi Satish,
Check this blog -
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Check Clemens reply in this thread, its great-
BADI
<b>Reward Points if this helps,</b>
Satish -
How to find out which sub query returns more than one row
Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
prxm.mbr_idntfr AS "Beneficiary ID",
md.last_name
|| ', '
|| md.first_name AS "Beneficiary Name",
pci.idntfr AS "Tracking No.",
TO_CHAR (TRUNC (req.pa_rqst_date),
'MM/dd/yyyy'
) AS "Request Date",
sts.status_name AS "Status",
req.pa_rqst_sid AS "Request #",
prxm.mbr_sid AS "Mbr_sid",
TO_CHAR
(TRUNC (req.pa_revision_date),
'MM/dd/yyyy'
) AS "Last Updated",
TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
DECODE
((SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
0, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "NPI/ID",
DECODE
((SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT pd.last_name
|| ', '
|| pd.first_name
|| ' '
|| pd.middle_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "Prvdr Name",
TO_CHAR (psd.from_date,
'MM/dd/yyyy'
) AS "Srvc From Date",
TO_CHAR (req.validity_start_date,
'MM/DD/YYYY'
) AS "Due Date",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>Left",
req.pa_mode_type_lkpcd AS "Source",
TO_CHAR (TRUNC (wmdtl.rtng_date),
'MM/dd/yyyy'
) AS "Assigned On",
NVL (wmdtl.assigned_to_user_name,
'Not Assigned'
) AS "Assigned To",
req.org_unit_sid AS "OrgUnitSid",
TO_CHAR
(wmdtl.modified_date,
'MM/dd/yyyy hh24:mi:ss'
) AS "WTRD_MODIFIED_DATE",
TO_CHAR (wmdtl.rtng_date,
'MM/dd/yyyy'
) AS "WTRD_RTNG_DATE",
req.status_cid AS "PA_STATUS_CID",
TO_CHAR (req.modified_date,
'MM/dd/yyyy'
) AS "PA_REQ_MODIFIED_DATE",
prs.state_pa_srvc_type_code
AS "STATE_PA_SRVC_TYPE_CODE",
wmdtl.wm_pa_task_rtng_dtl_sid
AS "WM_TASK_RTNG_DTL_SID",
wmdtl.assigned_to_user_acct_sid
AS "WTRD_Assigned_to_user_acct_sid",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>LeftSort",
wmdtl.assigned_to_org_unit_sid
AS "WTRD_Assigned_to_OrgUntSid",
DECODE
((SELECT COUNT (*)
FROM pa_request_status prs
WHERE prs.pa_rqst_sid = req.pa_rqst_sid
AND prs.status_cid = 5
AND prs.oprtnl_flag = 'I'),
0, 'N',
'Y'
) AS "SHOW_UTILIZATION"
FROM pa_request req,
pa_certification_identifier pci,
status sts,
pa_request_x_member prxm,
wm_pa_task_routing_detail wmdtl,
pa_service_date psd,
org_unit ou,
pa_request_service prs,
pa_request_x_provider_location prxpl,
provider_location pl,
provider_detail pd,
provider p,
mbr_dmgrphc md
WHERE req.oprtnl_flag = 'A'
AND req.status_cid NOT IN
(20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
AND req.org_unit_sid IN
(3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
3101, 3186, 3102, 3187, 3103, 3003, 75000104,
75000108, 2006, 75000103, 75000102, 75000113,
75000111, 75000109, 2001, 2009, 75000105,
75000107, 2004, 2010, 2013, 2014, 2005, 2011,
75000112, 2002, 1001, 2012, 75000106, 2007,
75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
3140, 3056, 3141)
AND req.pa_rqst_sid = prs.pa_rqst_sid
AND prs.oprtnl_flag = 'A'
AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
AND psd.oprtnl_flag = 'A'
AND req.pa_rqst_sid = pci.pa_rqst_sid
AND pci.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxm.pa_rqst_sid
AND prxm.oprtnl_flag = 'A'
AND md.oprtnl_flag = 'A'
AND md.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
AND prxm.mbr_sid = md.mbr_sid
AND ou.org_unit_sid = req.org_unit_sid
AND ou.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
AND pci.pa_rqst_sid = prxm.pa_rqst_sid
AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxpl.pa_prvdr_type_lkpcd = 'RR'
AND prxpl.oprtnl_flag = 'A'
AND req.status_cid = sts.status_cid
AND sts.status_type_cid = 3
AND sts.oprtnl_flag = 'A'
AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
AND p.prvdr_sid = pd.prvdr_sid
AND p.prvdr_sid = pl.prvdr_sid
AND pd.oprtnl_flag = 'A'
AND pd.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
AND wmdtl.subsystem_lkpcd = 'PA'
AND wmdtl.oprtnl_flag = 'A'
AND req.pa_rqst_date > (SYSDATE - 365)
ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
"Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck! -
How to find out which data control do the page layout components come from?
hi,
work in Jdev 11.1.2.3
After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
--i cannot find data control related information in the property pallete for the page layout component.
Regards.This information can be found in the page definition file.
Select the field in the page and then click the binding tab.
Maybe you are looking for
-
External Presenter removed from meeting after 1 hour of presenting
Any time we have give presentation rights to an external customer who is coming in as a guest and using the web access to the meeting, and they are presenting for over 1 hour they are removed from the meeting while still actively presenting content.
-
Add a Code to Change the ABAP Query
Hi All, I have a requirement in which i need to add a check box to a selection screen in ABAP query i inserted this check box in the infoset .The report is using joins from table EKKO,EKPO and EKES and display all the Vendor Confirmation details but
-
All, After spending far too long messing about with Java Roles, I'm admitting partial defect and asking for help!! I am trying to create a role within CUP 5.3 which restricts a specific support team to only being able to access the Request administra
-
Hello, We are facing problems since we upgraded our excel from SP2 to SP3. Everytime we select new data from our dimension it deletes the rows from report and it is screwing up all our reports. We have one system which has excel SP2 and it is working
-
Using Call_Form - want to retain data in existing calling Form
Hi All, I would be grateful for assistance with the following scenario: Form A calls Form B and when user presses 'SAVE' (not to commit to the database) button in Form B then customer wants the program to return to Form A, commit current pending chan