How to find out which bluetooth version is installed for wireless mighty m.
Hi all,
I just ordered the new Wireless Mighty Mouse. The specs. required Bluetooth V2.0. I tried to find out if my PB 17'' 1GHz (built in 2003) is supporting it, but the hardware information panel only gives the latest firmware version (1.7.5f10). I have no clue if this is V2 or not.
Any ideas on how to get more info?
Chris
Dual G5 1.8 GHz / PB 17" 1 GHz / AirPort Extreme Mac OS X (10.4.7)
Mark,
three things I can say already:
1) I set my PB into sleep mode. By klicking the mouse the PB went on immediately
2) when I physically switch off the mouse (PB states "lost connection") and back on again, I need to klick the mouse once to have the connection back. But this needs approx. 2 seconds until it works. Without klicking the mouse I don't know if the connection is reestablished on its own, after more than 30 sec. of waiting I gave up and klicked the mouse
3) if the PB is in sleep mode and the mouse is physically switched off, the minute I turn the mouse on again and klick its button once the PB turns back on
So far I couldn't see the mouse going into some kind of sleep mode (I wasn't so patient up to now).
Funny thing: the new laser seems to emit as I would guess infra-red light, at least it is not visible. So no more red shiny mouse in black night. And there is a small green led on the bottom side of the mouse a) flashing if it searches for a connection and b) indicating if the laser is on/off
Chris
Similar Messages
-
How to find out which SMB version runns on Lion
Hello,
How can i find out which SMB Protocol Version runns on OS X Lion??
We have a small LAN and have bad performance with Macs running Lion (and Mountain Lion) connected to Windows 7 / 8
I am still running Snow Leopard and get better performance than others running newer Versions of OS X.
For example when i am connected to a windows machine i get around 10-11 MB per second (in a 100 Mbit LAN).
My colleagues running newer os x versions get around 8-9 MB (the LION User ony about 7 MB).Open AirPort Utility and click on your AirPort Extreme icon, then click directly on the AirPort Extreme heading just to the right of the icon and info about your model will appear.
Do the same for the AirPort Express. -
How to find out which Airport Version I have
How is it possible to find out which Aiport Extreme and Express I have. I searched for Airport Overiew but cannot find specs.
Open AirPort Utility and click on your AirPort Extreme icon, then click directly on the AirPort Extreme heading just to the right of the icon and info about your model will appear.
Do the same for the AirPort Express. -
How to find out which table store historical data for V_T001B?
dear all,
how i want to trace and find out which table that store all maintenance data history from V_T001B?
thanks.i already find out into both table... but the data not store there...
-
How to find out the exact version of web server 7.0
Dear all,
I am using currently web server 7.0 and in error logs its shows me following version
Sun Java System Web Server 7.0 B12/04/2006 10:15
what i need how to find out what exact version i am using in my webserver 7.0 is it update 6 or update 7 or update 8
how to find out what exact version i am using in web server 7.0.....
thanks and regards
tigerWeb Server tells you specifically which Update release in the string you quote (in your string you are running the original release of Web Server 7.0).
My server is currently running Web Server 7.0 Update 7. The startup string looks like:
[19/Jan/2010:11:18:27] info (15407): CORE1116: Sun Java System Web Server 7.0U7 B12/14/2009 22:58 -
How to find out which type of the driver is used in our application?
Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
PhoenioxHi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
for(int i=0;i<drivers.size();i++)
Driver driver = (Driver)drivers.get(i);
String driverName = driver.getClass().getName();
System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath -
How to find out which server is running on which port
hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanthThe best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation). -
How to find out which job is calling package
Respected sir,
How to find out which job is calling my package. Please help me regarding this.
Regards,
user570124Please read about [url http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_util.htm#i997163]DBMS_UTILITY.FORMAT_CALL_STACK in the manual.
or [url http://asktom.oracle.com/tkyte/who_called_me/index.html]this routine from Tom Kyte may be what you are looking for.
Regards,
Rob. -
How to find out which plugin is missing fro mthe website: http://web.it.nctu.edu.tw/~twli/interactive/scr_tutf.htm?
After looking at one similar question found in mozilla support and answered by jscher2000 (https://support.mozilla.org/en-US/questions/957655), I have found out I have to look for either <object or <embed. What I found is : <embed width="100%" height="100%" messagecallback="parent.frames.MANIPULATIONS.AppendMessage" spinfps="15" spiny="30"
What do I have to do now?This big1.mol (and possibly big2.mol) file is loaded in the embed plugin object that is opened in a iframe, so you can right-click the plugin area to check the embed code.
*http://web.it.nctu.edu.tw/%7Etwli/interactive/big1.mol
*http://web.it.nctu.edu.tw/%7Etwli/interactive/big2.mol -
How to find out which Badi is triggering in which transaction
Hi SAP gurus,
Can any one tell me How to find out which Badi is triggering in which transaction.
If I have a BADI . I want to know in how many transaction it will trigger.
Can you help me in this issue. Its very important and urgent.
Points will be rewarded.
Thanks,
Satish.Hi Satish,
Check this blog -
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Check Clemens reply in this thread, its great-
BADI
<b>Reward Points if this helps,</b>
Satish -
How to find out which keywords were used to create a smart album?
Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown. -
How to find out which object on a JPanel was clicked...
I have a JPanel that contains about 200 other small JPanels(only 8 are visible at any one time), and a JButton(with Visible set to false).
When one of the small JPanels is rightclicked i want to know which one was clicked so I can add the JButton to it (set theJButton Visible on the JPanel that was rightclicked). When the JButton is clicked, it will hide the JPanel it was on and hide itself again.
I added a MouseListener(MousePressed) to the main Jpanel but I dont know how to find out which of the smaller JPanels was clicked. I would Also need to know how (in the ActionEvent for the JButton) the JButton knows which JPanel it is on so it knows which one to delete.
------------------------------------------------------------------CODE
void JPanel1_mousePressed(MouseEvent e) {
if ((e.getModifiers() & e.BUTTON3_MASK)!=0){
------------------------------------------------------------------CODE
void JButton1_actionPerformed(ActionEvent e) {
------------------------------------------------------------------CODE
Can this be done or should I add a MousePressed Listener to each of the 200 small JPanels and create a JButton for each of them??
Any Info Appreciated... Thanks....Here you get a hint, hope have added all mouseListener as well and registered....addMouseLi...etc
// many JPanels here...
JPanel clickedPanel; // a reference only
// In mouse Click..
public void mouseClicked( MouseEvent e ){
clickedPanel = e.getSource( );
clickedPanel.add(new JButton("Look, I am Added") );
} // it is Only HINT, a working HINT -
How to find out Which SAP programs are affecting Which Z programs?
Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
VishnuDo we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu -
How to find out which sub query returns more than one row
Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
prxm.mbr_idntfr AS "Beneficiary ID",
md.last_name
|| ', '
|| md.first_name AS "Beneficiary Name",
pci.idntfr AS "Tracking No.",
TO_CHAR (TRUNC (req.pa_rqst_date),
'MM/dd/yyyy'
) AS "Request Date",
sts.status_name AS "Status",
req.pa_rqst_sid AS "Request #",
prxm.mbr_sid AS "Mbr_sid",
TO_CHAR
(TRUNC (req.pa_revision_date),
'MM/dd/yyyy'
) AS "Last Updated",
TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
DECODE
((SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
0, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "NPI/ID",
DECODE
((SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT pd.last_name
|| ', '
|| pd.first_name
|| ' '
|| pd.middle_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "Prvdr Name",
TO_CHAR (psd.from_date,
'MM/dd/yyyy'
) AS "Srvc From Date",
TO_CHAR (req.validity_start_date,
'MM/DD/YYYY'
) AS "Due Date",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>Left",
req.pa_mode_type_lkpcd AS "Source",
TO_CHAR (TRUNC (wmdtl.rtng_date),
'MM/dd/yyyy'
) AS "Assigned On",
NVL (wmdtl.assigned_to_user_name,
'Not Assigned'
) AS "Assigned To",
req.org_unit_sid AS "OrgUnitSid",
TO_CHAR
(wmdtl.modified_date,
'MM/dd/yyyy hh24:mi:ss'
) AS "WTRD_MODIFIED_DATE",
TO_CHAR (wmdtl.rtng_date,
'MM/dd/yyyy'
) AS "WTRD_RTNG_DATE",
req.status_cid AS "PA_STATUS_CID",
TO_CHAR (req.modified_date,
'MM/dd/yyyy'
) AS "PA_REQ_MODIFIED_DATE",
prs.state_pa_srvc_type_code
AS "STATE_PA_SRVC_TYPE_CODE",
wmdtl.wm_pa_task_rtng_dtl_sid
AS "WM_TASK_RTNG_DTL_SID",
wmdtl.assigned_to_user_acct_sid
AS "WTRD_Assigned_to_user_acct_sid",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>LeftSort",
wmdtl.assigned_to_org_unit_sid
AS "WTRD_Assigned_to_OrgUntSid",
DECODE
((SELECT COUNT (*)
FROM pa_request_status prs
WHERE prs.pa_rqst_sid = req.pa_rqst_sid
AND prs.status_cid = 5
AND prs.oprtnl_flag = 'I'),
0, 'N',
'Y'
) AS "SHOW_UTILIZATION"
FROM pa_request req,
pa_certification_identifier pci,
status sts,
pa_request_x_member prxm,
wm_pa_task_routing_detail wmdtl,
pa_service_date psd,
org_unit ou,
pa_request_service prs,
pa_request_x_provider_location prxpl,
provider_location pl,
provider_detail pd,
provider p,
mbr_dmgrphc md
WHERE req.oprtnl_flag = 'A'
AND req.status_cid NOT IN
(20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
AND req.org_unit_sid IN
(3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
3101, 3186, 3102, 3187, 3103, 3003, 75000104,
75000108, 2006, 75000103, 75000102, 75000113,
75000111, 75000109, 2001, 2009, 75000105,
75000107, 2004, 2010, 2013, 2014, 2005, 2011,
75000112, 2002, 1001, 2012, 75000106, 2007,
75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
3140, 3056, 3141)
AND req.pa_rqst_sid = prs.pa_rqst_sid
AND prs.oprtnl_flag = 'A'
AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
AND psd.oprtnl_flag = 'A'
AND req.pa_rqst_sid = pci.pa_rqst_sid
AND pci.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxm.pa_rqst_sid
AND prxm.oprtnl_flag = 'A'
AND md.oprtnl_flag = 'A'
AND md.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
AND prxm.mbr_sid = md.mbr_sid
AND ou.org_unit_sid = req.org_unit_sid
AND ou.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
AND pci.pa_rqst_sid = prxm.pa_rqst_sid
AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxpl.pa_prvdr_type_lkpcd = 'RR'
AND prxpl.oprtnl_flag = 'A'
AND req.status_cid = sts.status_cid
AND sts.status_type_cid = 3
AND sts.oprtnl_flag = 'A'
AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
AND p.prvdr_sid = pd.prvdr_sid
AND p.prvdr_sid = pl.prvdr_sid
AND pd.oprtnl_flag = 'A'
AND pd.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
AND wmdtl.subsystem_lkpcd = 'PA'
AND wmdtl.oprtnl_flag = 'A'
AND req.pa_rqst_date > (SYSDATE - 365)
ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
"Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck! -
How to find out which objects are at the end of the datafiles
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/
Maybe you are looking for
-
Multiple devices on cinema display
Hi all, Im considering buying a cinema display. But i seem to have to following problem. There are probably lot's of people who ran into this but here my question. i own a mac mini macbook air and a 'normal' pc also used for gaming. The cinema displa
-
Ucm connection configuration on webcenter portal app
Hi All, We create a webcenter portal application and connect with Webcenter content using Application Resources --> connections --> content repository connection. The parameters that we provided for the connection are: Socket type: socket, Hostname,
-
Clearing the 7344 commands buffer ?
Problem Statement: If an e-stop or other condition occurs while one of my axes is in motion, the hardware-hardwiring will disable the servo drive(s). After recovering from an e-stop or another fault condition, if I re-enable the servo drive the servo
-
hi, By default i need the value for the SC in Ship-to-address tab.how can i achive this??? and i am creating a external staff request for that also i want to define the default value on the performance locaton tab..??? thx in advance...
-
Quicktime Convert - Only Converts first item
I have a bunch of AVI files to convert to iPod Format. I have 2 actions in my Automator workflow: -> Ask for Movies -> Export Movies (with the iPod format chosen) I drag and drop the folder of files, it exports the first and then stops. Tried this on