How to find Parameters IDs

for SPA/ GPA , How to find Parameters IDs for particular field?
Edited by: bhushankotwal on Nov 3, 2009 11:32 AM

hi ,
Go to SE11->Dataelement->Further Characteristics->Parameter Id
Regards,
Srilatha

Similar Messages

  • How to find user ids based on authori object & values.

    Hi all,
      I am trying to find User master records based on
    Authorization object - M_EINK_FRG ( realease strategy for tocde ME28 - MM)
    values -
    code --VP
    GRP - 01
    I found some time before with Tcode SUIM using trail and error method.
    I am trying it again but not possible. is there any easy method or report to pull out this info.
    Thanks
    Satheesh

    Hi Satheesh,
    SUIM gets the data from many tables and is the best solution for searching an user based on the authorization object.
    You will find the auth object in SUIM.
    SUIM->User->Users by complex selection criteria>by authorizations>Auth Object->execute->select a user>click on selectively expand the tree--->execute based on auth obj.
    Rakesh

  • How to find the search help for the parameters stmt in a report

    hi
    how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

    I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition  "Matchcode Object"
    Parameter: a type i matchcode object 'Search Help Name'
    Search Help name should be in single quotes.
    Regards,
    Anubhav.
    P.S: Award Points if useful.

  • How to find custom parameters and its values?

    Hi,
    Please let me know how to find the list of custom parameters with its possible values and its use in programs?
    Thanks.

    There is no validation for the values that can be input so you can put anything in the value field. For example, try "BUK" and
    then a value for a company code you know does not exist.
    When you run a transaction with that it will default that value.

  • How to find Ledger, LE, Op units, Org(All) names and IDs ?????

    How to find Ledger, LE, Op units, Org(All) names and IDs ?????
    Regards:
    Shahzad M. Saleem

    Dear Rajen!!
    How can i link GL_SETS_OF_BOOKS  & XLE_ENTITY_PROFILES ??? as Gl Sets of books has ledger ID whereas XLE_ENTITY_PROFILES has legal entity id???
    I want All LE and all of there ledgers, units and orgs.
    Regards:
    Shahzad M. Saleem

  • How to find the group ids from which the mail has been sent

    Hi,
    We are able to see the list of mails have been sent to respective mail ids with the help of tcode SOST.
    Is there any way to find through which group ids the mails have been sent.
    Tehe details showing as the mail has been sent by Batchusr.
    Please suggest how to find the group id from where the the mails have been triggered.
    Regards,
    Jena.

    Hi
    This is not helpfull
    If you open any notification QM03, there you will get tab " Action Log"
    If you click on action log , there are two fileds
    Date and time for task release
    I want to fetch these fileds in one of Z report.
    I am unable to find table name for these two fileds
    Task release Date
    Task release Time
    Can we add 'QN CHANGE DATE' parameter in the selection screen (just like QN creation date) w/ range?  The user want to run the report by QN change date as well.

  • How to find the List of expired user Ids

    How to find the List of expired user Ids

    Can you please tell me the question in detail.What do u mean by expired users?
    IN a Client or in a System.

  • How to find out BW Publisher parameters

    Dear Experts,
    In the process of installing BO XI 3.1 Integration tool Kit For SAP Solutions.I came to know that i need  Program ID,Gateway Host,Gateway Service details of BW.
    1)Can you please tell me the steps in detail , how  to find out the above details from BW?

    Hi,
    Please go through by below details.
    GwHost - Hostname of the BW server (BW server Name)
    GwServ - Gateway of BW server (e.g. 3300 or sapgw00)
    ProgID - Program ID of Registered Server Program defined for RFC destination (SM59) on BW server (Logon on the SAP BW by SAP GUI and go to the transaction SM59.You can get the ProgID from SM59.)
    Or you  can ask to the your Basis consultant for more details.
    Thanks,
    Amit

  • How to find tcode of  a logical link id attached to a transaction launcher

    dear all ,
    In crm 2007 we have used transaction launcher to call transactions of is utilities system .
    i can see the transaction logical link ids in SPRO but how to find the transaction associated with this logical id .
    Thanks & Regards

    hi Anit,
    goto->Customer Relationship Management->UI Framework->Technical Role Definition->Define Navigation Bar Profile
    Open your logical link. Check parameter of your logical link. Suppose it is zxyz.
    then goto
    Customer Relationship Management->UI Framework->Technical Role Definition->Transaction Launcher->Copy/Delete Launch Transactions
    Goto Launch Transactions select your tx and open Import Parameters. Check parameter field. you will find the required information.
    Good Luck.
    Pankaj Kumar

  • How to find out the user-exits?

    hi.
    how to find out the user-exits?
    regards
    eswar.

    Hi,
    *& Report  ZEXITFINDER
    *report  zexitfinder.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Regards

  • Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own?
    Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
    If each has their own does each id have to buy their own music and apps?
    Yes, all purchases are non-transferable.
    How does find my iphone work with one apple id or two?
    Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
    I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
    If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

  • How to find function code for buttons on toolbar in oops alv

    Hi experts,
    I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
    method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

    Hi Prakash,
    -->First you have to set the pf status in your alv program by,
    {FORM pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'FIRST'.
    ENDFORM.                    "PF_STATUS}
    -->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
          i_callback_pf_status_set          = 'PF_STATUS'}
    *-->Then doble click on that pf status,
    From the menu bar, select Extras->Adjust Template->List Viewer,
    This will give you the existing statndard gui status of the program*
    ->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
          i_callback_user_command           = 'COMM'
    And make a subroutine of the name 'COMM'i.e,
    FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
      DATA: okcode TYPE sy-ucomm.
      okcode = ucomm.
      CASE okcode.
        WHEN 'REF'.
        CALL FUNCTION 'POPUP_TO_INFORM'
          EXPORTING
            titel         = 'MANSI'
            txt1          = 'CREATED BY'
            txt2          = SY-UNAME
          TXT3          = ' '
          TXT4          = ' '
    endcase.
    Hope it helps you
    Regrds
    Mansi

  • How to find open sales orders.

    Hi Gurus,
    Can you please help me out How to find open Sales orders in SAP.
    Is there any transaction code available or we can get it through via tables.
    Your afforts are highly appriciated .
    SRavani.

    Dear SRAVANI,
    You can find open sales orders from the Transaction code "VA05N", You just run this report, Below the screen you can find open sales orders radio button , you select this and give execution parameters and execute(F8).
    You will get the all open orders.
    Hope it fixes your issue.
    Please check it and revert.
    Thanks&Regards
    Raghu.k

  • How to find values for fields of  PROPERTIES  in cl_crm_documents= create_w

    Hi  everyone ,
    I am attaching files from local disk to CRM Opportunity by using method cl_crm_documents=>create_with_file .
    I am able to see files in SAP frontend portal , but the problem is some of the fields in properties tab coming blank .
    So how to find the NAME and VALUE fields of PROPERTIES structure in create_with_file  .
    Right now i am passing below fields these ar coming
    "-----Filling Properties structure
        ls_prop-name   = 'KW_RELATIVE_URL'.
        ls_prop-value  = wa_path-ls_name.
        APPEND ls_prop TO lt_prop.
        ls_prop-name   = 'DESCRIPTION '.
        ls_prop-value  = 'Strategy paper for action plan1' .
        APPEND ls_prop TO lt_prop.
    ls_prop-name  = 'LANGUAGE'.
        ls_prop-value = sy-langu.
        APPEND ls_prop TO lt_prop.
    but fileds like Attachment Type , Document Status ,  Line of Business , Business Year and Country of LE are not coming
    as i frontend is a CRM custom application to mentain opportunity .
    at prasent i am passing attribute Names and default values of these fields to properties structure  but then also i am unable to see it in front end.
    Please help if anybody knows where to find the NAME and VALUE fields for thse parameters.
    Regards
    Chetan

    I used insert statement to populate these fields in table CRMD_KW_DOC_GEN as these are custom fields.
    Regards
    Chetan

  • How to find open Po's.?

    Hi frds..
    How to find the open POs(POs without GR) and tell me in which table and field it stored ?
    thanks
    Pari Vendhan.R

    Hi,
    it has many IFs and BUTs. Please select data from EKKO where BSTYP = "F", LOEKZ blank and other fields as per your choice. Please ensure that you do not select much data.
    Then select data from EKPO where LOEKZ and ELIKZ are blank.
    You may have to tune the report based on customer's requirement then.
    Please use ME2* reports with desired Selection parameters. Or copy it and tune based on your requirement.
    - Sanjeev

Maybe you are looking for