How to find possible problem clip(s)

My current project has over 500clips. The majority are video (~400) with some cross fades. There are a few titles (9) ,some stills and some audio tracks. Not enough FX to cause problems I think.
Somewhere in there there seems to be a clip (or more than one) that causes the RAM to fill up more than other projects and the fan to run at high speed. Had the constant fan running issue in the previous version (10.0.7) but that cleared up in 10.0.8. This happens as soon as I launch FCPX with that project selected. The other problem is that as my RAM fills up the system response slows down. Even my mouse movements show on the screen as jerky and inaccurate.
I've deleted preferences with Preference Manager and only have the one project visible to FCP - that doesn't change anything. Also tried duplicating the project and deleting render files - again no improvement.
So my question is do any of you have any suggestions? I'd love to stop the high speed fan running all the time. If this is an issue with a bad clip (or several) is there any way I can find the problem short of going through and removing them one by one until I either find the problem or go crazy trying?
MBP, 10.7.5, i7, 8 gb RAM
Thanks.

Thanks for the rapid response Tom.
The project is 720p, 59.94 fps
Codecs: AAC, H.264 (GoPro footage) and H.264, Linear PCM (Panasonic HDC-TM700 footage)
Audio: 48 kHz from GoPro and Panasonic cameras, 44.1 kHz recorded music. Audio output channels: 2. Audio Configuration: 1 Stereo
There are a couple of compound clips that don't show any codecs. I have noticed a couple of other clips (there may be more) that play fine but any codecs when displaying info.
My knowledge isn't deep enough to know if these numbers answer your question or if these specs are ok. The problem started before I added any still images so I suspect they're innocent.

Similar Messages

How to find the problem in EP trace file?

Hi
Last week all the role assignments to users under LDAP datasource got deleted from the portal. We have reuploaded the role assigmnet. Now got the trace files from the server. How to check what happend on that day ?
When all roles assignmnets gone?
Any Keywords to help!
Thanks!
Dhiya.J

Hi both,
I got the trace file already from J2EE server. Im struggling to find out anything from the trace file ..
How to check when role assignments got deleted ?
any LDAP configuration changes ?
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[6, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.5.trc]/>
<!NEXTFILE[defaultTrace.7.trc]/>
<!LOGHEADER[END]/>
#1.5 #0018FE349B47007000000C1900001A200004939077FC1A8D#1288148604431#System.err#sap.com/irj#System.err#gmbeqy#17773####c35ae9f0e17611df93420018fe349b47#SAPEngine_Application_Thread[impl:3]_7##0#0#Error##Plain###     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)#
#1.5 #0018FE349B47007000000C1A00001A200004939077FC1DC9#1288148604431#System.err#sap.com/irj#System.err#gmbeqy#17773####c35ae9f0e17611df93420018fe349b47#SAPEngine_Application_Thread[impl:3]_7##0#0#Error##Plain###     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)#
11d30a40e26211dfaa7e0018fe349b47#SAPEngine_Application_Thread[impl:3]_21##0#0#Error##Plain###Caused by: java.lang.NullPointerException#
#1.5 #0018FE349B470059000004C300001A20000493A816802148#1288250048138#com.sap.security.core.imp#sap.com/tcwddispwda#com.sap.security.core.imp.[cf=com.sap.security.core.imp.User][md=init][cl=22052]#gmrnis#29282##sghrppr1.sgh.shs_PPH_15804951#gmrnis#e42beac1e26211dfa6230018fe349b47#SAPEngine_Application_Thread[impl:3]_28##0#0#Error##Java###Error while populating "USER.CORP_LDAP.cn=norsheha bte ismail,ou=mro - hims,ou=sgh,dc=sgh,dc=shs,dc=com,dc=sg"
[EXCEPTION]
#1#com.sap.security.core.persistence.datasource.PersistenceException: [LDAP: error code 32 - 0000208D: NameErr: DSID-031001BD, problem 2001 (NO_OBJECT), data 0, best match of:
     'DC=sgh,DC=shs,DC=com,DC=sg'
     at com.sap.security.core.persistence.datasource.imp.LDAPPersistence.populatePrincipalDatabag(LDAPPersistence.java:1456)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.getPrincipalDatabag(PrincipalDatabagFactoryInstance.java:2307)
     at com.sap.security.core.imp.User.init(User.java:244)
     at com.sap.security.core.imp.AbstractPrincipal.<init>(AbstractPrincipal.java:186)
     at com.sap.security.core.imp.Principal.<init>(Principal.java:64)
     at com.sap.security.core.imp.User.<init>(User.java:213)
     at com.sap.security.core.imp.User.<init>(User.java:203)
It keeps on going like this ... any key word to search?
Thanks!

SAP Error code- How to find possible errors

Hi,
Please advise is there any way to identify the possible errors in data or in config using error codes displayed by the sap system. Any such procedure to trace the possible mistakes. please guide me.

dear friend,
one of the approaches as follows ( technical , not functional): on your error screen goto System-Status, double click on Program (screen)
and in this ABAP editor you could try to find out the place with that particular error code/number.
then to analyse the code (why this message is called).
to use this method you need to be able understand abap.
just in case, all messages exist in standard table T100, so you can search there by text error or message number.
from functional point of view you could try to find out the place in config (spro) where you can customize that particular message , say , error, or warning, or just skip. But this doesn't work always! Some of system messages are not configurable.
depends on module and etc..
good luck!

How to find deleted video clips

Dear all
Having returned from our family holidays I created a sub folder from my main image library to show holiday images and holiday video clips.
From this folder I then separated all holiday related videos and had two sub folders, one called holiday images and one for videos.
I then preceded to go into the first folder to remove the videos and to my horror when I returned to the video sub folder they were deleted from there also!!!.
I have gone into edit undo and most of the videos have returned but there are still some very special clips missing.
Is there a way to get back these deleted files. Any help would be really appreciated.
Many thanks

Hi
I have enabled "Advanced settings" in my preferences.
Meaning - turned on Advance tools ? - Yes it's a must
You take video clip 2 from Events and drop it onto Clip 1 in PROJECT's and a menu will unfold where You select Pictur in Picture.
( from Event's to Event's or Project to Project - DO NOT Work. )
Yours Bengt W

Laptop's freezing: how to find out what the problem is?

Hi all,
First of, I realize that this is not the best forum to ask about hardware
issues, but that's not *exactly* what my question is, please read on!
So, my laptop started freezing at seemingly random times. I understand
that this could be a hardware issue, but I was wondering if there is any
way I can find out something. For instance, I tried to have htop running
constantly so when the laptop froze I checked if any stats where weird,
but there wasn't any problem that I could see.
Any other ideas on how I could possibly get an idea what's wrong?

When it freezes:
Do the keyboard lights flash?
Can you SSH into the box?
Can you ping the box?
Does it unfreeze? Or does it require you shutdown and reboot?
If it unfreezes, was the disk access light on during the freeze?
Is there anything interesting in the logs or journals after your reboot?
Other things you can try:
Blacklist kernel modules of all non-essential hardware and see if that improves stability.
If it does, turn them back on, one at a time.
Is it temperature related? Check both ambient and core temperatures.
Is it susceptible to mechanical shock?
Have you run a memory test?
Does it only freeze when on batteries?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

How do I find out what program / file is using 100 GB of space on my Hard drive? Once I find the problem how do I delete the specific files to increase GB of space?

How do I find out what program / file is using 100 GB of space on my Hard drive? Once I find the problem how do I delete the specific files to increase GB of space?

Use OmniDiskSweeper
Once you find file, it can be deleted from within OmniDiskSweeper
Allan

I captured from mini-dv camcorder to FCP7 using control from my computer and firewire. I cannot find the file or clips I transferred anywhere except for in Finder. How do I get the clips from Finder to FCP7. Also I did not see audio on the computer meters

I captured from mini-dv camcorder to FCP7 using control from my computer. I only find the capture clip in Finder. How do I get the clip in Finder to FCP7.
Also my audio in the capture was not showing up on my audio meters on my computer-is this normal. Thanks

you will not see the audio meters from within fcp move while capturing.
If you only see the captured clip in the finder, not within fcp, there's something wrong. You might try deleting your fcp preferences
https://discussions.apple.com/docs/DOC-2491

How to find cause of db performance problem??

Hi,
I am facing continuous performance issues with our database and for that I want to know how I can get information about the following points:
1- How to find most accessed table(s) or tables with highest hits or top queries is accessing which table(s)?
2- What indication can tell that a particular table need to be rebuilt?
3- When to rebuild indexes? and how to know that an indexed need to be rebuilt?
Your prompt reply is highly appreciated
Thanks,
Younis

Hi,
a good starting point for investigating poor database performance is AWR (if you have a license for that) or statspack (if you don't). If you need help interpreting it, you can refer to J. Lewis's series on statspack reports (also applies to AWR):
http://jonathanlewis.wordpress.com/2011/03/09/statspack-reports/
I have also made a few blog posts on this topic, see http://savvinov.com/tag/awr/
Regarding your other questions -- countrary to popular belief, rebuilding indexes or tables is seldom helpful. More often, performance problems are caused by bad execution plans (side effects of bind peaking, inaccurate statistics, correlated predicates etc.), data design issues, bad coding practices, not using bind variables etc.
Database performance topic is a huge topic and obviously cannot fit into a discussion thread. Christian Antognini's book "Oracle Performance Troubleshooting" can provide you a gentle introduction into performance tuning, provided you already have good familiarity with Oracle architecture.
Or, if you want help with your particular problem, post your AWR report here and briefly describe what your users are unhappy about -- there is a good chance that you get valuable feedback from several renowned experts.
Good luck!
Best regards,
Nikolay

Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the problem pages?

Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the pages where the problems are? Or otherwise, why doesn't print Apple the book how it is. Idon't need the text which couldn'be seen.

The forum is for Logic Pro users.. I will ask the moderators to move it to a more appropriate forum for your question/subject
Cheers..

I would like to update the latest Adobe Flash as mine is outdated, but it says it can't install as my antivirus software is preventing it and I need to allow it. My problem is I don't know what my antivirus software is or how to find it on my Mac to

I would like to update the latest Adobe Flash as mine is outdated, but it says it can't install as my antivirus software is preventing it and I need to allow it. My problem is I don't know what my antivirus software is or how to find it on my Mac OS X 10.9.5 to adjust the settings. Help

We don't know what it is either.

Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

My photoshop 10 has stopped working is there a telephone number for support that I can call to find out how to fix the problem???

My photo shop 10 program has stopped working. Is there a telephone number that I can call for support to find out how to fix the problem???Jenny

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Receiving this message"Can't create the file "highlighter_welcome_header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges." I have enough storage how do I find the problem?

Can’t create the file “highlighter_welcome_header.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
How do I find the problem? Disk is not full.

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it.

How to find possible problem clip(s)

Similar Messages

Maybe you are looking for