How to find posted documents for Master Data in BW?

Hello,
We are planning to use Knowledge Warehouse to store some documents against some Master Data like 0PROJECT. The idea is to use those documents when reporting on real cost versus budget.
We created a custom interface that we use to create new master data in BW directly, and we have an input field which precises the name of the files to be loaded. That works fine.
However, we need now to include in that custom interface a table which will display the existing documents for the project currently displayed. We want to avoid to load a same document twice.
I do not succeed in linking the master data values and the documents. I found the table RSODPHIOMA. It contains the key of the documents that I look for. How can I make the link between that key and my master data values?
Regards
Laurent

Hi
go to RSA1 -> Infosources ->
Here go to top screen ...or find the control icon thru cntl +F
here enter your infosource/infoobject name......
Double click on the result and it will show the infosource...under that infopackage
Assign points if useful
Regards
N Ganesh

Similar Messages

How to find infosource/datasource for master data.....

i would like to know how to find the infosource/datasource for the master data in RSA1, i have looked for in infosources options to find master data infosource, say for example 0material, 0fiscalyear /0fiscperiod. i was not able to find but in the process chains the data is getting loaded into it. i could see the data going from monitor screen to the selection screen of the master data and then click on execute button and data is present.
secondly when i have clicked on the respective infoobject i was not able to find any requests under requests tab???????

Hi
go to RSA1 -> Infosources ->
Here go to top screen ...or find the control icon thru cntl +F
here enter your infosource/infoobject name......
Double click on the result and it will show the infosource...under that infopackage
Assign points if useful
Regards
N Ganesh

Concatenated values used in documents for master data-Urgent

Hi,
while trying to activate a master data object, it is not activating and this message appears
"Concatenated values used in documents for master data"
Please help me in this regard.

Hi,
this forum is about the SAP BusinessObjects BI Solution Architecture. I would suggest you post your questions into the SAP BW forum.
regards
Ingo Hilgefort

Error : Concatenated values used in documents for master data

Hi Experts,
I am trying to add one characteristics as compounding characteristics to my master data info object.
previously 'Document property' option was checked for the infoobject. so i unchecked it, as it was not allowing me to add the compounding characterisitcs.
After doing the changes, when I am trying to save, its throwing error as 'Concatenated values used in documents for master data'.
Can anyone please help me with what exactly does it mean and what would be the solution to remove this error.
Thanks,
Neelima
Edited by: Potnuru Neelima on Mar 1, 2011 8:39 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:40 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:41 AM

Hi All,
Just found the soultion...wanted to share this....
Actually one document was created on one of my opportunity values, which was not simply visible from edit menu -> documents.
Go to RSA1 -> documents -> master data -> and then give ur info object name -> will get all the documents maintained corresponding to it. Need to delete them.
Then compounding characteristic can be added to our info object.
Regards,
Neelima

How to do Stastical Setup for Master data Loading

Hi All
Thanks a lot for all guys,who are helping me a lot.
I want to do stastical setup for Master data of sales order.I know how to do for transaction data.
But what is the procedure for MAster data in SBIW-Tcode.
Regards
Balaji

Hi,
Actually first we should load data to Master data table and then to Transaction load data.By this reporting performance will be good.Right?
Actually this will decrease the time of transaction data loading .So it improves the loading performance , not reporting performance.
Now I got a doubt from where this Master Data is been loading? and how to load this data.
2LIS_11_VAITM and 2LIS_11_VASCL are the DS for Transaction data , not for master data.To load the master data, first of all find out the master bearing characterstics in the data target.And then search for teh DS of master data in R/3 with tcode RSA6 .You will use characterstic(info object) as the search option here.
For example 0materail is the Master characterstic.
And you can see the DS for this Characterstic in RSA6(if it is not there, you have activate it from RSA5)
0MATERIAL_ATTR
0MATERIAL_LGEN_HIER
0MATERIAL_LKLS_HIER
0MATERIAL_TEXT
With rgds,
Anil Kumar Sharma .P

How to create process chains for Master Data?

I need information on " how we can create process Chains for Master Data"

Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini

Mass Upload Documents for Master Data in BI 7.0

Can anyone confirm that the 'How To' document for uploading mass documents is still valid in BI 7.0 SP 15 (it was stated for 3.0B SP7) or suggest another way to do this?
The business requirement is to upload numerous image files as BW: Physical Class Master Data documents for 0MATERIAL. It would need to also set the Log.Doc.Property of Document Type = value.

This code does work in BI 7.0 SP 16, with a small alteration.

Problem in finding the datasources for master data for 0TCT_MC11

Hi,
I want to load the data in 0TCT_MC11(BI7) , which is one of the technical content multiprovider. I have a datasource to load data in it , but I am not able to find the data source for the master data objects. hence I am stopped in doing loading to this MP. Can some body let me know where can I get the Information about the Datasources to load master data.
Thanks,
Jeetu

Hi Srilatha,
While reading data from 0TCT_MC11 through query I am getting the following message...(query name 0TCT_MC11_Q0130)
"Error while reading data; navigation is possible
"Value XY2CLNT400AHPL_ACCT"
"You are trying to load the invalid characteristic value 1. (hexidecimal representation 0044004200320043004C004E00540036003000300049004F00)."
Please let me know if you have any suggestions for this.
Thanks, Jeetu

How to find original document for which settlement has been carried out.

Hello Friends,
As a process of period end, we have executed the automatic settlement for assets under construction for an internal order through KO8G.
After completing the run system has posted a document successfully.
When I want to check the original document for posted document through FB03, through Environment  Document Environment  Original document. System is showing the same settlement document rather than the original document.
Can any one explain me how to check the original document for which settlement has been carried out.
Regards,
RS

"Original document" means from where the document originated. Means for eg MM invoice will be original document for FI invoice. Hoever for settlement document, Settlement process it self is the origin for posting. This way, You cannt trace back the Fi postings which got settled. You need to run line item report for the object and analyse the Fi postings and corresponding Settlement postings

How to Find preceeding Document for sales document

Hi,
Please let me know how to find preceding or subsequent document for sales document.
Thanks,
Mahdukar.

Hi,
For individual document you can go to VA03 ,Vl03n, va02 or vl02n, vf03 or vf02 and click on document flow.
Also you can find the details of preceding document for all the sales documents in the single table VBFA. Tcode -se11 or se16 or se16n.
HOpe this will resolve your query.
Regards,
Krishna O

How to build customized screens for Master Data Users

Hi all,
I need to build screens on top of centrally managed master data hub (Data Manager). I want to confirm following
1) Should I go with Guided procedure (CAF) and pre defined Portal contains provided by SAP for MDM?
2) Should I use Java API's provided with SAP MDM.
License is not al all the issue. We have the entire NW components in place. But not sure what to use and what are the advantages/disadv???
Please share your views....
Thx,
R.n

Hi,
I would suggest GP would be easier and in this you can integrate with ur customised objects also.
Vinay

How to find Info Source for Export Data source in Data Marts node

Hi
I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
Thanks
Padma

In the infosource tab in RSA1 - use settings --> display generated objects
you will be able to see the datamart infosources..

TO FIND TABLES FOR MASTER DATA TRANSACTIONS

HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.

Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI

Creation of OLAP Variable for Master data

Dear BW Experts,
How to Create OLAP Variable for Master data in SAP BW? What is the use of OLAP Variable?

The entry column Type (Variable) on the Select Data tabpage indicates a variable time frame in which the data should be requested. The variables are not replaced by concrete values until a request is made. There are eight options:
Variable Data request Description
0
 Yesterday
 (12am 12am)
1
 Last week
 (Monday-Sunday)
2
 Last month
 (1. (First day - last day of previous month)
3
 Last quarter
 (1. (First day - last day of previous quarter)
4
 Last year
 (01. (January 1 Dec 31 of previous year)
5
 User time selection
 See below
6
 ABAP routines
 See below
7
 OLAP variables
 See below
Time selections with the help of the variables 0 to 4.
The variables 0-4 only refer to date fields of the data type DATS.
User time selection
Type 5 gives you a free selection of all fields.
If you select this variable for a field, confirm the selection, and then choose Detail for Type, an additional dialog box appears. In this dialog box you can freely limit the values of the fields and determine the next period value and the number of periods until a repetition.
Variables are placeholders for values and are not replaced by concrete values until a data request is made. You can also use a Variable for selections when requesting data for an InfoObject, if you choose type 7, confirm the selection, and then choose Detail for Type.

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

How to find posted documents for Master Data in BW?

Similar Messages

Maybe you are looking for