How to find price changes in FG

Hi to all,
Although we are using moving price for FG, is there any method to find changes in price of FG?
Regards
Nitin

check the reply from expert Brahmankar.
Please check MBEWH table.
MBEW tablestores the current valuation price, while MBEWH stores the previous or historical value. In your material master go to accounting-1 view you can click on previous preiod/year & view the historical values.

Similar Messages

How to find prices of inforecord

Sir,
ply help me how to find prices of inforecord by tables with validity date
regards
amey

If inforecord is with Material Master >>> then you can see the validity dates in table A017.
You will get condition record # from A017.
if you want to see the further details, then you can see the condtn tables like KONM , KONP and others with the help of condtn #
If info record is without Material Master >>> then you can see table A025.
For table A025 >> you will have to pass Info Record # to fetch the Cond Record #
with this condtn record # you can get further details from Condtn tables
Joining EINA and EINE, it has a unque field (INFNR- purchasing infor record #), so joining these two tables should not be a problem.
if you need any other information from table A017 or A025, then you need to take ABAPer help as you can not join these via SQVI
Hope this will help you

How to register price change

We bought product from vendor.
We created A/P Invoice;
After checking, we found that the goods is not the same quality as promised.
We negotiated with supplier and they agreed to reduce the price.
How I need to process in B1?
I found that Credit Memo is used when we need to return goods (It subtracts from the inventory). I do not want to return, just only the price change. How to do?
Please advice.
Thank you.

You should use A/P Correction Invoice

How to find the changes made in spro configuration?

Dear Friends,
From my client side, some configuration changes were happened directly to production client not by the consultants. How to trace this that what changes have been made through log or table. We found that in spro->utilities->change log is in switched off mode. We came to know that through this log we can find the changes happened or not. Is it so? or is there any other solution to trace it?
Please advise.
thanks & regards
sankar.

thanks friends for your prompt replies.
But, as i said clear, the changes made to production client directly and not by any request. How can we detect who has changed the log settings.
****Default account assignment configuration was changed.
Please advise.
thanks & regards
Sankar.

How to find row changes in table

How can we find row changes in table and i want o find out any significant change in the row information in 11g db.

hi thanks for ur help
but i had one more problem
already i tried this one
at particular time i am getting that record
........................ col1 col2 col3 col4 col5
3/17/2012 11:55 AM 10 20 30 40 50
3/17/2012 12:00 PM 0 0 0 0 0
3/17/2012 12:05 PM 12 22 32 42 52
see here at 12:00 PM i got the null or zero values.so instead of null values i need consecutive record means below row like 12:05 row values i need
output is:
.......................... col1 col2 col3 col4 col5
3/17/2012 11:55 AM 10 20 30 40 50
3/17/2012 12:00 PM 12 22 32 42 52
3/17/2012 12:05 PM 12 22 32 42 52
its very urgent plz help to me.
Edited by: 913672 on Mar 17, 2012 6:35 AM
Edited by: 913672 on Mar 17, 2012 6:36 AM
Edited by: 913672 on Mar 17, 2012 6:36 AM

How to find all changed GPO's?

We're running AD level 2008 R2. I have a default GP setup for each OU. I'd like to search each GP and find ANY changes made. I can open "All Settings" under User and Computer Configuration, but that doesn't show me the changes to Preferences.
How can I get "All Settings" that covers everything under my default group policies?

Hi,
>>How can I get "All Settings" that covers everything under my default group policies?
To check what settings are configured in a GPO, in Group Policy Management Console (GPMC), you can click the GPO and you can see all the settings configured in the GPO under the
Settings tab.
To check what group policy settings has been applied to a user, you can run cmd command
gpresult/h gpreport.html on the computer onto which the user logs, and to check what group policy settings have been applied to a computer, you need to run the mentioned command with admin privileges.
Besides, you can also follow the steps below to collect group policy result on domain controller for a specific user on a specific computer.
1. On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console.
2. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select
the proper user in the wizard)
3. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
In addition, you can also use Group Policy Modeling to simulate a policy deployment that would be applied to users and computers before actually applying the policies.
Regarding group policy modeling, the following article can be referred to for more information.
Simulate Resultant Set of Policy Using Group Policy Modeling
http://technet.microsoft.com/en-us/library/cc771389.aspx
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

How to find the Changes like functional location category

Hi Experts,
Can anyone guide me as to how to get the changes in Func loc category made for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
Faster response will be highly appreciated and rewarded.
Regards,
Manish

Hi,
Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
Regards,
Maheswaran.

How to find obsolete/changed tables of ECC5.0 to ECC6.0

I am doing an upgrade from ECC5.0 to ECC6.0. i have to find out tables which are in ECC5.0 and are obsolete/changed in ECC6.0

> Actually we are studying the existing system. So we wanted to know what kind of impact and how much it would be on table if we did an upgrade. That is why i want the information.
And you will be able to judge the impact and the consequences by knowing which tables are modified?
As far as I know that information does not exist - and it wouldn't even fit in to an Excel sheet because there are too many tables in a SAP system. Depending on the scenarious you implemented they may be of use or not.
To check what has changed and how your business is been probably impacted I suggest reading the releasenotes (http://service.sap.com/releasenotes) for ERP 6.0. They will give you an overview of what has changed per component more than you will get by a technical table view.
Markus

How to find Capacity changes ( Who did)

Hi Gurus,
here is my question.....We have reference capacity scenarios...i.e when ever we create a work center ,in the capacity view we refer a reference capacity..so only changes can be done at reference capacity level...recently someone accidentally changed a week as non working week by going into "intervals and shifts" tab (Putting value 0 in Workday column)......but who did it i could not find ...it is not recoreded anywhere......i have tried with KAPA ,KAZY and CR10 as well but without success...could anybody plz tell where can i find this information as to find who did this?.....Any help is highly appreciated...
Thanks
Appa

Hi
Check with T code AUT10 and give the T code and execute.
Regards
Anupam Sharma

How to find the changes in Settlement receiver of a PM order?

Hi Gurus,
Need your valuable inputs on this issue.
I Have a PM order where in I have created a settlement Receiver.If i change the settlement receiver i dont see the chnages in The Action Log or changes.This makes it difficult to trace the chnages made if the settlement receiver.
Where can i find these chnages ?
Whereas if i chnage the Cost Center or Profit center i can find them in the changes or Action log in the PM order
why is this differnce
Please give your inputs
regs
leo

Hi Pete,
Thanks for your response.When i follow what you mentioned i get the error no chnage document found.
In My order I changed the Settlement receiver from cost center to WBS but still bo chnage was shown.
Please suggest where to look further..and seeting to check for the same
regds
leo

How to find out changes to standard objects

Hi,
Is there any way to find out which all standard objects have been modified, either via a table or FM or any other way?
Have tried SE95 but it also gives objects changed during last upgrade.
Any help would be appreciated.
Thanks in advance.
Peter

>
durga kottapalli wrote:
> Hi,
> check this link
> http://i-sap.blogspot.com/2007/11/change-documents.html
>
> it would help you
> Thanks and regards
> durga.K
That has absolutely nothing to do with what OP is asking. So it wouldn't help him.

How to find all changes in project builder (especially in user field)

Hi All,
Please advice, how can i get the history who change our data in cj20n (project builder),especially in user field tab.
Thank you.
Best Regards,
Nies

I am stating once again what ever was mentioned earlier:
Check the below:
1. Is Change documents indicator enabled in the project profile?
2. Have you created a User Status for business transaction 'Create Change documents' as allowed for the object WBS. (I assume you want to log the changes of WBS user defined fields)
3. Have you used the this profile while creating the project?
4. Did you set the user status on the WBS? This needs to be done manually
5. Have you released the WBS?
Now try make changes to existing fields of WBS and save it. Run the report CN60
Regards
Sreenivas
Pls close this post if satisfied

How to find the changed objects of a transformation

Hi,Experts
If you someone changed the transformation,I want to know how he changed it?What I mean is which object,which rule he changed.How can i know that?whether the system can provide that information or not?
Thanks!
Best regards!
Edited by: kun luo on Apr 28, 2008 11:26 AM

Hi Kun,
Check with version managemnet....
http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e0fb4eb711d182bf0000e829fbfe/frameset.htm
Regards,
Vijay.

How to find out changes in order in APO

Hi,
I have with me order number. I want to know what changes are done in APO in particular time period through which transactions.
I mean I want to see changes particular order in particular time period.
I tried with /SAPAPO/C3
But in 24 hours period there are thousands of log it is not possible search one by one.
By anyway can I filter logs pertaining to one production order.
Regards,
Santosh

Thanks both.
I was searching for changes in APO through ECC only.
Our problem is suddenly few production orders are loosing charcteristics(we are using CDP).
We are working with SAP for last one month, but no luck.
To findout reason we were copying active planning version twice a week and also monitoring for new production order with lost charcteristics.
While comparing versions we found that one receipt element ( we are using multi item order)is added in production order which may be reason for loss of charcteristic.
to our surprise there is no change in production order in ECC during this period.
I cannot think of APO changing firmed receipt element production order.
NO CCR was done for this order during this period.
As we know day and not exact time when this happened wanted to have logs based prodction order.
It seems it is not possible?
Is there anyway?
Regards,
Santosh

How to find tables changed from one table authorization group to other.

Hi Experts,
We have a issue where certain tables have been moved from one Authorizaiton group to the othe table authorization group.
We want to find all tables previous authorization group.
Is there any wayt we could find the old authorization group.
(for example)
Consider a scenario where a table agr_1251 was moved to the new auth group ZAUTH.
I wanted to find which auth group was holding the table agr_1251 previously.
Can you please help me on this request?
Thanks.

One more way is to check TR (Table E070, E071). But you need to find the details for table (Like for role it is R3TR, ACGR).
Regards,
Arpan Paik

How to find price changes in FG

Similar Messages

Maybe you are looking for