How to find process chain transport no
Dear experts,
I have made some changes in existing process chain and while saving it did not ask me for a transport request.
So I want to check if the process chain has been created as local.
Is there any way to check this. I was looking for some object directory option to check , but could not find.
Please help.
best regards,
You can check this in various ways:
1) simply go to transport connection in rsa1 and drag the process chain to right hand side...there you can see the transport number...
2)Go to rspc -
> process chain from menu bar ---> attribute ---> last change by -> see object catelog--> hit the diplay button for person responsible -
> there you can see the lock view
Similar Messages
-
How to find process chain using background job in sm37
How to find process chain using background job in sm37
Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM -
Process chain tables - how to find process chains
I have an info cube; I want to know what are the process chains that are loading data into this info cube; how to find it using the tables? I want to know the specific rspc table to get this information
thanks
rajanHello,
RSPCCHAIN Process chain details
use this table ..
Regards, -
Hi,
I have an infocube and also creted one process chain on it.
Now, my query is ,
Can i know, in which process chain my info cube is used.(as there are many process chains).
Thanks,
Naresh.hi,
Select the infopackage of infocube in Transaction RSA1-->click on processchain button in menu bar.
Rahul -
How to find Process chain for event and parameter
Hi,
I have Event and parameter for the process, I wanted to know the which process chain does that process belons to.
Is there any table where I can see those.Hi,
Try these tables.
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Hope this helps.
Thanks,
JituK -
Problem with a process chain transport
Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji -
How to stop process chain, if it is taking too much time than expected.
Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
Thanks in Advance.
Harmanhow I can stop the process chain ??
If the job is running for a long time ,
1)GOTO RSMO and SM37 and check the long running job over there.
2)There you can see the status of the job.
3)If the job is still running you can kill that job
4)delete the failed request from data target.
for more details go to this below link
how to stop process chain if it yellow for long time
how I can execute it again ?
GOto Function module RSPC_API_CHAIN_START
and give u r process chain name there.and execute. -
How to schedule Process chains in Bi Admin Cockpit
Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please adviseHi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona -
How to change process chain in SAP APO, in RSCP tcode.
HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran. -
How to create Process chain in BI 7.0
hi,
I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.check these links..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain -
How to create Process chain for Aggregate for Master data
Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please adviseHello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf -
How to create process chain ?
hi all,
will you please simlify how to create process chain if anybody has a screen shot or slide show about pc creation it will definatly help me a lot.
rewrd point for sure,This may help:
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045]
Regards,
Jordi -
How to create process chains,and how to use process like and or xor
Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik -
How to Trigger process chains??
hi all
How to Trigger process chains??
Can anybody step by steps??
thanks
SenthilThe background control options are available to directly schedule the start process. You can start the start process immediately , that is when activating the process chain, for a specified time, or after a particular event. When you activate the process chain, the start process is scheduled in the background as defined in your selections.
You can also trigger the start of a process chain via a meta chain. A meta chain is when a process chain, to which you set this start condition, is fixed to another process chain. The process chain is started directly by this meta chain.
When you start the start process via a meta chain, it is not scheduled after you activated the related process chain. The process is only started when the meta chain, to which it is linked, is running.
The remaining chain processes, that is the application processes and the collection processes, are scheduled to wait for an event.
The start process has the following special features:
Only the start process can be scheduled without a predecessor process.
The start process can not be a successor to another process.
Only one start process is allowed for each process chain.
One start process can only be used in an individual process chain -
Hi Experts,
I created Process chain for Deliveries in D sys and transported to P sys. Here we have six source systems so first we created 6 process chains for each source systems. Later we decide to add all those variants in one Process chain and we deleted individual process chain and transported to P sys.
So Process chains are deleted in D system and P system but changes are not effected in P system. Process Chains are not invisible both D & P systems.
But when we run the Deliveries Process chain, deleted Process chains are also running. And getting Error due to both are scheduled at same time. Because deleted Process chains are still showing in where used list....
Can any one help me guys!!!!
Thank you,
SureshHi Suresh,
Can you please let us know what type of scheduling option you have used in the start variant.
Also please have a check if the start variant in all the chains are the same?
As per my understanding unless the start variant is triggered the chains will not get scheduled.
Also there is a bug in Bi7.0, that once the process chain transport has been completed to other environemt its starts getting executed if the start variant hold tha option as Direct scheduling - > Immediate.
Prathish
Maybe you are looking for
-
How to determine which pictures are in albums?
With 7000 pictures over 10 years, I decided to group some into albums. This I did. I then came back the next day to continue my task and learned that photos are not "moved" into albums but all 7000 remain in the library. Trouble is I do not know whic
-
ASA5520 reverse telnet problem
Hi all, I have a problem with ASA5520 and reverse telnet. I recently upgrade IOS on ASA5520, asa921-k8. Problem is that cisco has latest IOS version asa91x.... for this platform. I have 7201 on remote site, and connect his aux to asa console. When I
-
The wifi connection on my new iPad mini (32GB wifi only) is so slow that I am submitting this from my iPod touch (4th gen). I actually started to access support on the iPad but it was just taking too long. Really this is not good enough for what shou
-
BUG : url with an anchor don't open the in-app browser
When you make to button to open a local url, it doesn't work if the url has an anchor tag. Exemple : HTMLResources/test.html -> open the file test.html with the in-app browser HTMLResources/test.html#test -> don't open the in-app browser It is a vali
-
CrystalReportsTier error in Diagnostic Tool for BO XI 3.0 Edge
We recently installed XI 3.0 Edge. We are having a problem with not being able to create parameters for Crystal reports any longer in Business View Manager (we create and save them, but when we come back in and try to view them, BVM crashes). When I