How to find programatically the installation location for Mysql?

How to find programatically the installation location for Mysql?

There are thousands of them. Probably hundreds of thousands. If you had a particular one in mind, just ask the person who set it up. There's no point in trying to write code for that, since you only need to ask once and put the location in your code.

Similar Messages

  • How do i get the installation package for Adobe Bridge

    Hello,
    Our Creative services Department have taken a Creative Cloud account and they only want to install Adobe Bridge, however when i access the Creative Cloud account there is no installer for Adobe Bridge. Now i believe Bridge is installed as part of the installation package for other Creative Cloud products such as Photoshop, so how would i find the installer package for just Bridge?
    Any help greatly appreciated

    and it seems like I saw this somewhere,
    http://www.adobe.com/products/bridge.html
    http://www.dummies.com/how-to/content/how-to-work-with-bridge-cc-and-the-adobe-output-ma.h tml

  • How to find out the GR Numbers for which IR has not been done

    Hi Sap Gurus,
    Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
    Thanks N Regards,
    Siddhartha

    Hi Siddarth,
    Solution :
            1) Go to SE16 - Table Name : EKBE (PO History)
            2) Field - BUDAT (Posting Date)
            3) Transaction event Type:
                             - 1 (Only GR's )
                             - 2 (Both GR and IR)
            4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
    In addition to MB5S, you can try this also...

  • How to find all the tables associated for a particular transaction

    Hi-
    May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
    Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
    Regards
    Sekhar

    Dear Micky Oestreich
    May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
    Hi Vengal Rao
    Thanks for your response. It helped me.
    Regards
    Sekhar

  • How to find out the infospoke name for an existing infoobject?

    Hi,
    Could any one pls tell me how to find out the existing infospoke name for an infoobject?
    i've tried with where used list but its not coming....can any one pls suggest
    Thanks,
    Suri

    Hi,
        Check in metadata repository for that infoObject.
    If you are still not able to identify, goto RSBO tx and press F4.
    You will get the list of Infospokes available.
    Go in each and chk from the General Tab, if the infoObject is available in the source system.
    Regards,
    Balaji V

  • How to find out the printer name for the Idoc

    Hi guys
    I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
    Regards
    Madhoo

    Hi,
    For ALE/IDOC the  medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
    Regards,
    Nagaraj

  • How to find out the best settings for BDT

    Hi there.
    I am trying to predict a movie rating. I downloaded datasets from IMDb, prepared them. A tried all of the regression algorithms, but the best result is giving Boosted Decision Tree. Now I am dealing with the best settings in this algorithm.
    With default, running time was 69 seconds and the mean absolute error was 0.4844, which is quite much I think. So I tried to improve it by changing parameters of the BDT module. I tried to set Leaves per tree to 150 and than experimentaly find
    remaining parameters. I've come to Samples per leaf=12, Learning rate=0.04 and
    Number of trees=700. Running time was 78 seconds and mean absolute error was 0.4596.
    Input of the algorithm is joined matrix with 14 columns (11 features) and 67672 rows splitted into 70:30 (training:testing).
    Is there any way how to find out the best setting of Boosted Decision Tree?

    Yordan's suggestion is correct, though the documentation is a bit outdated.
    You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
    Regards,
    aK

  • How do I change the default location for iPhoto media?

    On my MacBook Pro, I have a 250 GB solid state drive. More than 140 GB of that space is taken up by images and video in my iPhoto folder. I want to purchase an external hard drive to store my iPhoto media so I can free up space on my Mac's hard drive. I can drag and copy the images/video to the new external hard drive, but in the future how can I change the default location to the new external device? I looked at iPhoto preferences, but see no setting that would re-direct media from my camera. Please help.

    Copy the library to the external hard drive.  Then launch iPhoto with the option key held down and choose the library on the external hard drive.
    Run the external library to make sure it has all of your photos and works as expected.  It will not be your default library. 
    Once you're sure the external library is good you can delete the library on the SSD.
    OT

  • How to customize the installation location for Acrobat Reader 11

    My c:\ is a SSD with limited space.  I would like to install Reader 11 to a different drive path, however the installer does not seem to have custom installation location option.

    Download the offline installer from http://get.adobe.com/reader/enterprise/, then click on 'Change Destination Folder' on the first install panel.

  • Programatically determine installation location for InDesign CS3, CS4, CS5, AND CS5.5 (Windows)

    We build plug-ins for all versions of InDesign from CS3 and later, for Windows and Mac.
    To deploy our plug-in(s) on Windows, we use InstallShield, which has a somewhat complicated mechanism to locate InDesign.exe and determine its version so we know which plug-in(s) to install, but basically, the location is determined (via the RegLocator table in InstallShield) based on this registry setting:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\InDesign.exe
    This has been working fine for all versions of InDesign since CS2.  However, that location is apparently no longer set by the InDesign CS5.5 installer.  So, we need to find some other way of programatically locating InDesign CS5.5 with our installer.
    I've searched the registry of a machine with InDesign CS5.5  installed, and there are other registry entries related to InDesign, but those  entries are not set by earlier versions of the InDesign installer.  Ideally, there would be a registry setting, or some other reliable marker we can use to locate the InDesign installation, which is consistent across all versions of InDesign (at least back to CS3).
    Using the registry setting is something we came up with on our own via  trial-and-error, since, as far as I know, there is no documented way to  locate the InDesign  installation folder.  (Our Mac installer uses a simpler mechanism to locate InDesign by the application name and version number.)
    I find the apparent lack of documentation on this a bit ironic, since just about every other aspect of the SDK and the methods for creating InDesign plug-ins is extremely well documented, expect for the last final bit one needs to know to get to the promised land of actually deploying a carefully crafted plug-in to customers' machines.  (This seems to be true of the Acrobat SDK as well.)  However, I could have just missed the relevant documentation, in which case, please point me to it.
    So, is there a recommended way to programatically  locate the InDesign installation location on Windows?  How are other people doing this in their installers?

    Hi Dan,
    this is the InDesign plugins SDK forum, you need the installer forum....
    Just kidding. I use a really hacky piece of VB to install my plugins while I'm developing...
    here's the bit which works out the folder depending on which version I'm compiling for.
    That gives you the gist anyway, and I imagine that most installers are going to do more or less the same thing, except they'll have short cuts ways of getting it.
    There's probably a better way, but this works for me...
        Private Function DiscoverApplicationFolderFromName(ByRef strApplicationName As String) As String
            Dim strApplicationSignature As String
            Dim strDefaultPath As String
            If (g_strCreativeSuiteVersion = CREATIVE_SUITE_5) Then
                ' special case for CS5, because a debug machine might have CS5 or CS5.5 or both installed.
                ' plugins built with the SDK for 5.5 will not run in CS5 apps
                strApplicationSignature = strApplicationName + ".Application." + CREATIVE_SUITE_55
                Dim strInCopyPath = DiscoverApplicationFolderFromSignature(strApplicationSignature, "")
                If (strInCopyPath <> "") Then
                    g_strCreativeSuiteVersion = CREATIVE_SUITE_55
                    Return strInCopyPath
                End If
            End If
            strApplicationSignature = strApplicationName + ".Application." + g_strCreativeSuiteVersion
            strDefaultPath = "C:\Program Files\Adobe\Adobe " + strApplicationName + " " + g_strCreativeSuiteVersion + "\" + strApplicationName + ".exe"
            Return DiscoverApplicationFolderFromSignature(strApplicationSignature, strDefaultPath)
        End Function
        Private Function DiscoverApplicationFolderFromSignature(ByRef strApplicationSignature As String, ByRef strDefaultPath As String) As String
            Dim strApplicationPath As String = DiscoverApplicationPathFromCLSID(strApplicationSignature, strDefaultPath)
            If (strApplicationPath = "") Then
                Return ""
            End If
            Dim strDirectory As String = Path.GetDirectoryName(strApplicationPath)
            ' Get rid of the trailing Debug because this depends on whether we install the Debug or Release version first or second.
            ' It will be added on again if we're using a Debug Configuration
            Dim strDebugTag As String = " Debug"
            If strDirectory.EndsWith(" Debug") Then
                strDirectory = strDirectory.Substring(0, strDirectory.Length - strDebugTag.Length)
            End If
            Return strDirectory
        End Function
        Private Function DiscoverApplicationPathFromCLSID(ByRef strApplicationSignature As String, ByRef strDefaultPath As String) As String
            Dim strApplicationPath As String = strDefaultPath
            Try
                Dim strKey As String = strApplicationSignature + "\CLSID"
                Dim regKey As RegistryKey = Registry.ClassesRoot.OpenSubKey(strKey)
                Dim strGUID As String = regKey.GetValue("")
                regKey.Close()
                If IsRegistryVirualized() Then
                    strKey = "Wow6432Node\CLSID\" + strGUID + "\LocalServer32"
                Else
                    strKey = "CLSID\" + strGUID + "\LocalServer32"
                End If
                regKey = Registry.ClassesRoot.OpenSubKey(strKey)
                strApplicationPath = regKey.GetValue("")
                regKey.Close()
            Catch ex As Exception
                LogMessage("FAILED DiscoverApplicationPathFromCLSID: " + strApplicationSignature)
                strApplicationPath = strDefaultPath
            End Try
            Return strApplicationPath
        End Function

  • How to find out the User Details for the particular transaction

    Hi,
    Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
    Thanks
    Sap Guru

    Hi:
    Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
    Please let me know if you need more information,
    Assign points if useful.
    Regards
    MSReddy

  • How can I change the path location for an entire album?

    Hi everyone:
    If I move a folder containing an album to another location for organizational purposes, every song in the album is now lost in the library. As I know it there are two options:
    1. Manually open each individual song info and find the location one at a time. Insanely slow, tedius and painful when repeating for many albums.
    2. Delete the lost songs and re-add them. While this is faster for finding locations it eliminates Rating and playlist information for the songs because the songs are now new dictionary items in the library. Which is probably even more painful.
    I am looking for 1 or 2 more options:
    3. Manually select multiple songs (or an album from the album list) and edit the path to the song locations (minus the filenames which would remain as before). This is still a pain but much more manageable.
    4. A feature that automatically finds missing songs. It wouldn't be that difficult. Add a tag to the song file with the unique db ID. Whenever a song is lost search the designated directory structure for the iTunes media. You could even import existing ID tags when creating a new library in case you are rebuilding your library or some other such activity.
    My question is for #3. #4 would be a fairly simple, effective and very useful feature, so I concede it's a pipe dream. If anyone can answer #3 I would GREATLY appreciate it!!
    Thanks,
    Raiden

    Type about:config in the address bar. Find browser.download.dir and change it to the path you want. Remember that Android has a linux base so the path will similar to /mnt/sdcard/downloads/

  • How to find out the logout details for a perticular user .

    Hi,
    I have an requirement to write a report which will run for hourly basis. using this program  i need to find out the logon & logout details so that i can calculate  the total productive hour for a perticular user. using table usr41 i can find out the logon detail. but i need to know the logout detail also to calculate the productive hour.
    pls suggest.

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

  • How to find out the exact reason for backordered order in oracle apps R12

    Hi,    
         I am new to OM module.I booked an order and trying to do "pick release" the booked order but i couldn't do so, because the order is getting backordered.
    These are the things i checked
    1.On-hand quantity for the particular item i am booking is sufficient enough
    2.Item is in M1 org and onhand quantity is also in same org.
    Can you please help me how to find the exact reason for my order getting backordered.
    Regards
    Sandeep.G

    Hi Sandeep,
    Reasons for pick release resulting in back ordered can be found here:
    Reasons for a Sales Order to get Backordered!
    Failing pick release, orders getting backordered and other common issues with picking.
    Please review notes:
    Cannot Pick Release Items, Completes with Warning and the Item is Backordered. (Doc ID 1240404.1)
    Pick Release Process Completes In Warning Line Gets Backordered Though Onhand Is Present (Doc ID 1285514.1)
    Pick Release Backorders Sales Order Lines, Error in Log File "No Mtl_Sales_Order ID found for oe header" (Doc ID 398385.1)
    Reservation Remains After Pick Release Of Backordered Move Order (Doc ID 754518.1)
    In addition, please review:
    What is Back Order in OM? How are Backorders Handled | Oracle Apps
    Thanks &
    Best Regards,

  • How to find out the Area Menu for a Report/ Table/Function Module

    Hi,
    Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
    Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
    Thank you for your quick response...
    Regards,
    Thiru
    <b></b>

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

Maybe you are looking for