How to find public url of a published site on the delivery system?

Hi,
I installed delivery system of webcenter sites 11gR1 and i published one site using "realtime publising method".
now how to form the url of a published site in delivery system.
could some body help me to find find the url.
Thank you,
Rajendar.

you can get the page url as Mahalwar says..
if you want to access your page through a friendly url, consider used assember url
you might find helpful info in the developer's guide:
Appendix B
WebCenter Sites URL Assemblers.
Edited by: QfLee on 2013-3-28 上午7:33

Similar Messages

Issues viewing the published site on the delivery system

Hi Guys,
Ive setup the management system which has a user interface,
and the delivery system which does not have a user interface but i read on the install guide
that delivery system does not have user interface? How true is that?
Next I published avisports (RealTime Comlete Publish) and fisrtsiteII (real time mirror to server)
changed the preview url from the management system to have ip and port for delivery, but to my suprise
no site visible...Y?
I get broswer error : HTTP Status 404 - Content Server could not process the request
type Status report
message Content Server could not process the request
description The requested resource is not available.
Apache Tomcat/6.0.36
Sites Log:
[2013-04-03 01:03:33,468 SAST] [ERROR] [http-7100-6] [logging.cs.satellite.request] Error accessing the external page with pmd: page: ?c=Page&childpagename=FirstSiteII/FSIILayout&cid=1118867611403&pagename=FSIIPreviewWrapper&rendermode=preview
[2013-04-03 01:03:33,468 SAST] [ERROR] [http-7100-6] [fatwire.logging.cs.request] COM.FutureTense.Common.ContentServerException: ContentServerException: (Client error (HTTP status code: 404) fetching data through Remote Satellite Server) Error code:PAGE NOT FOUND
Please assist thank you.

Hi Rodney,
please find below the log from the csHome install dir from today this is after I try to direct to url http://192.254.43.167:7100/cs/Satellite?pagename=avisports:
[2013-04-04 17:18:58,523 SAST] [INFO ] [      main] [fatwire.logging.cs.event] CSShutdownListener is initialized
[2013-04-04 17:18:58,685 SAST] [INFO ] [      main] [springframework.context.support.ClassPathXmlApplicationContext] Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@395d601f: display name [org.springframework.context.support.ClassPathXmlApplicationContext@395d601f]; startup date [Thu Apr 04 17:18:58 SAST 2013]; root of context hierarchy
[2013-04-04 17:18:58,913 SAST] [INFO ] [      main] [beans.factory.xml.XmlBeanDefinitionReader] Loading XML bean definitions from class path resource [SSOConfig.xml]
[2013-04-04 17:18:59,551 SAST] [INFO ] [      main] [springframework.context.support.ClassPathXmlApplicationContext] Bean factory for application context [org.springframework.context.support.ClassPathXmlApplicationContext@395d601f]: org.springframework.beans.factory.support.DefaultListableBeanFactory@2f6b904d
[2013-04-04 17:18:59,610 SAST] [INFO ] [      main] [beans.factory.support.DefaultListableBeanFactory] Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@2f6b904d: defining beans [ssoprovider,ssofilter,ssolistener,auxlistener,ssoconfig]; root of factory hierarchy
[2013-04-04 17:19:33,679 SAST] [INFO ] [      main] [springframework.context.support.ClassPathXmlApplicationContext] Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@54c9f997: display name [org.springframework.context.support.ClassPathXmlApplicationContext@54c9f997]; startup date [Thu Apr 04 17:19:33 SAST 2013]; root of context hierarchy
[2013-04-04 17:19:33,680 SAST] [INFO ] [      main] [beans.factory.xml.XmlBeanDefinitionReader] Loading XML bean definitions from class path resource [SitesSecurityContext.xml]
[2013-04-04 17:19:33,738 SAST] [INFO ] [      main] [beans.factory.xml.XmlBeanDefinitionReader] Loading XML bean definitions from class path resource [ReqAuthConfig.xml]
[2013-04-04 17:19:33,773 SAST] [INFO ] [      main] [springframework.context.support.ClassPathXmlApplicationContext] Bean factory for application context [org.springframework.context.support.ClassPathXmlApplicationContext@54c9f997]: org.springframework.beans.factory.support.DefaultListableBeanFactory@7cbdb375
[2013-04-04 17:19:33,782 SAST] [INFO ] [      main] [beans.factory.support.DefaultListableBeanFactory] Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@7cbdb375: defining beans [cryptoPackage,securityConfig,tokenPackage,securityContext,reqAuthConfig]; root of factory hierarchy
[2013-04-04 17:19:34,381 SAST] [INFO ] [      main] [fatwire.logging.cs.filelock] ftFileLock using nio file locking
[2013-04-04 17:19:38,604 SAST] [INFO ] [      main] [beans.factory.xml.XmlBeanDefinitionReader] Loading XML bean definitions from class path resource [BufferingConfig.xml]
[2013-04-04 17:19:46,146 SAST] [INFO ] [      main] [beans.factory.xml.XmlBeanDefinitionReader] Loading XML bean definitions from class path resource [RestResources.xml]
[2013-04-04 17:19:46,176 SAST] [INFO ] [      main] [beans.factory.xml.XmlBeanDefinitionReader] Loading XML bean definitions from class path resource [custom/RestResources.xml]
[2013-04-04 17:19:48,722 SAST] [INFO ] [      main] [logging.cs.satellite.host] Remote Host: http://localhost:80
[2013-04-04 17:19:48,743 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Satellite Server running in stand-alone mode
[2013-04-04 17:19:48,859 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Starting scratch cleaner with: 120 second(s) heart beat for temp folder :/u01/apache-tomcat-6.0.36/work/Catalina/localhost/cs/sscache/scratch/
[2013-04-04 17:19:48,861 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Satellite Server servlet bootup complete
[2013-04-04 17:19:48,867 SAST] [INFO ] [      main] [logging.cs.satellite.host] Remote Host: http://localhost:80
[2013-04-04 17:19:48,868 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Satellite Server running in stand-alone mode
[2013-04-04 17:19:48,868 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Satellite Server servlet bootup complete
[2013-04-04 17:19:48,871 SAST] [INFO ] [      main] [logging.cs.satellite.host] Remote Host: http://localhost:80
[2013-04-04 17:19:48,872 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Satellite Server running in stand-alone mode
[2013-04-04 17:19:48,872 SAST] [INFO ] [      main] [fatwire.logging.cs.satellite] Satellite Server servlet bootup complete
[2013-04-04 17:20:58,578 SAST] [ERROR] [http-7100-1] [logging.cs.satellite.request] Error accessing the external page with pmd: page: ?pagename=avisports
[2013-04-04 17:20:58,593 SAST] [ERROR] [http-7100-1] [fatwire.logging.cs.request] COM.FutureTense.Common.ContentServerException: ContentServerException: (Fetch failed for page: ?pagename=avisports) Error code:REMOTE SATELLITE SERVER CONNECTOR ERROR
COM.FutureTense.Common.ContentServerException: ContentServerException: (Fetch failed for page: ?pagename=avisports) Error code:REMOTE SATELLITE SERVER CONNECTOR ERROR
     at com.openmarket.Satellite.RemoteContentServerEh.fetchCacheObject(RemoteContentServerEh.java:319)
     at com.openmarket.Satellite.AbstractContentServer$CacheObjectFetchFunction.doWork(AbstractContentServer.java:413)
     at com.openmarket.Satellite.AbstractContentServer.getCacheObject(AbstractContentServer.java:220)
     at com.openmarket.Satellite.AbstractContentServerEh.getCacheObject(AbstractContentServerEh.java:168)
     at com.openmarket.Satellite.RemoteContentServerEh.getCacheObject(RemoteContentServerEh.java:35)
     at com.openmarket.Satellite.SatelliteServer.execute(SatelliteServer.java:83)
     at com.openmarket.Satellite.servlet.BaseServlet.doGet(BaseServlet.java:121)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:192)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:695)
     at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:861)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:606)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.fatwire.cs.core.http.HttpAccessException: org.apache.http.conn.HttpHostConnectException: Connection to http://localhost:80 refused
     at com.fatwire.cs.core.http.HttpAccess.execute(HttpAccess.java:367)
     at com.openmarket.Satellite.RemoteContentServerEh.fetchCacheObject(RemoteContentServerEh.java:226)
     ... 27 more
Caused by: org.apache.http.conn.HttpHostConnectException: Connection to http://localhost:80 refused
     at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:158)
     at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:149)
     at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:121)
     at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:573)
     at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:425)
     at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:820)
     at com.fatwire.cs.core.http.HttpAccess.execute(HttpAccess.java:552)
     at com.fatwire.cs.core.http.HttpAccess.execute(HttpAccess.java:343)
     ... 28 more
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at org.apache.http.conn.scheme.PlainSocketFactory.connectSocket(PlainSocketFactory.java:123)
     at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:148)
     ... 35 more

How to open a URL without session ID and reuse the current browser session?

Hi All,
I have a question about HTMLDB 2.0
How to open a URL without session ID and reuse the current browser session?
That was the behaviour in HTMLDB 1.6 ...
My usecase for this is the following:
We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
In these email we've put a link to some page, with some parameters in the URL.
The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
Then he receives another email (e.g. for another ticked). He clicks on the link and :
a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
Best regards,
Mihail Daskalov

Mihail - I detailed a couple of approaches here: Re: Application Link
Scott

How to find that a sales order for which there is delivery but no goods

Hi
How to find that a sales order for which there is delivery but no goods issue has been done i.e we have an open delivery for a sales order.
How in VBUK table can we find out with the sales order no .
Thanks in advance

make use of table VBFA.
Regards
Peram

HT1529 How to find another Apple ID is registered my Product the Serial number.

How to find another Apple ID is registered my Product the Serial number.
my Apple Product cannot register to my Apple ID.

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

How to create a pop up window while creation of the delivery note.

Hello Experts
How to create a pop up window while creation of the delivery note.
As soon as we go in to delivery note creation screen in VL01N, immediately a pop up screen should be displayed on the screen containing the following details,
For e.g.
Str. Loc     Qty      UOM
DE01        100        KG
DE99          50        KG

Dear all,
i m having two document numbers for invoic of same types such as output type print program and smartform.
biut the issue is im getting print preview for one invoic and for another invoic i m not getting any print preview.
Directly the cursor comes to initial stage of vf03.
suggest what to do
Thanks and regarnds
ravi

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
Name : Seagate Backup+ BL Media
          Type :           Disk
          Partition Map Scheme :           Master Boot Record
          Disk Identifier :           disk1
          Media Name :           Seagate Backup+ BL Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           NA5B83S2
          Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
          Writable :           Yes
          Ejectable :           Yes
          Location :           External
          Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
          Disk Number :           1
          Partition Number :           0
          S.M.A.R.T. Status :           Not Supported

Seagate website.
Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

Changing the Site URL of a Sharepoint site changes the content type order

Description
Changing the Site URL of a Sharepoint site changes the content type order of all lists that
* contain folder content types
* and have a custom content type order
* where a folder content type is the first content type in order.
Reproducible behaviour
1. Create a Team Site in Sharepoint
2. Create a Task List "Test" on the Team Site
3. Go to List Settings
4. The Content Type order is by default
    a. Task
    b. Summary Task
5. Change the Content Type Order to
    a. Summary Task
    b. Task
6. Go To Site Settings "Title, description and icon"
7. Change the Site Url
8. Go To List "Test" List Settings
9. The Content Type order now is
    a. Task
    b. Summary Task
10. Select "Change New button order and default content type"
11. Here, the Content Type order still is
    a. Summary Task
    b. Task
Is this a bug? Has anyone noticed this behaviour before?
Kind Regards,
Joachim

Hi Joachim,
You are not missing something or doing something wrong. i Hope :). This behavior is reproductible.
The granularity of change is better by Powershell. But by the interface is most user-friendly.
Maybe that's the reason of this behavior.
Gilles Martinez
Twitter
Blog
Please mark as helpful/answer if this resolved your post

How Can I Minimize a VI to an Icon on the Windows System Tray?

How Can I Minimize a VI to an Icon on the Windows System Tray?

There are some examples available online, using both ActiveX and .NET. Try searching for "tray icon".
It's been a while since I looked at it, but if memory serves, the structures needed to load an icon through the Win32 API are actually quite complicated and not as simple as that article makes them out to be.
Try to take over the world!

How to find public and private url for an EBS instance?

I am asked to find public and private url for an instance. I did in the following way. Can u please correct me if following is wrong.
1) Go to .xml file.
2) found s_external_url and corresponding entry is public URL.
3) found s_login_page and corresponding entry is private URL.
Please correct me any thing is wrong.
Regards
DBA.

please give a hand. online waiting....
thanks....

How to find a url embedded in a photo

Hi - sometimes I need to find a url that is embedded into a photograph - can anyone tell me what software I need to find the url?

Hi Mark - sorry for my delay in replying but had a rather busy day yesterday. I think the answer is steganography. I play a game called Munzee and sometimes you have a picture where the link is hidden in the photograph or image. When I used to have a PC you could copy the picture into Photoshop and it would show the link to the website. Since I have updated to Maverick my existing PS Elements program does not work so I am using Aperture and I cannot find how to drop the image into it. I am getting on in years so plain and simple explanations are useful to me. Thank you for your help

How to find broken url from custom 404 page?

I have created a custom 404 jsp page and updated the web deployment descriptor with the code:
     <error-page>
        <error-code>404</error-code>
        <location>/jsp/custom-404.jsp</location>
     </error-page>Whenever I enter an invalid url or click on broken link (target does not exist), a 404 HTTP response arises and the custom-404.jsp is rendered. So far so good.
Within the custom-404.jsp, I would like to know the original url (invalid link or broken link) so that I can send the administrator an email with the url details.But, I could not find any API to find this url?
Can someone help here please?
Thanks

My bet is that it is available as referrer inside the error page in case of a redirect, or as Request URI in case of a forward.
String referrer = httpServletRequest.getHeader("referer"); // Yes, with the legendary misspelling in it.
// or
String requestURI = httpServletRequest.getRequestURI();

How to find Discussions URL

I was wanting to tell a new Mac user how to find the Apple Discussion link (i have it bookmarked). I went to Support but could not find the link to Discussions. Has this been removed from support? How do I tell them to locate it?

It now appears in Support in the middle of the page, under Community, with a link to Discussions.

How to find WSDL url for a portlet

Hi,
I am using webcenter 11.1.1.4. I have created one portlet and successfully deployed in application server. For registering portlet into webcenter i have to enter WSDL url. After deploying portlet i didnt get WSDL url. After completion of deployment the following message is getting
[02:34:47 PM] ---- Deployment started. ----
[02:34:47 PM] Target platform is (Weblogic 10.3).
[02:34:48 PM] Retrieving existing application information
[02:34:48 PM] Running dependency analysis...
[02:34:48 PM] Building...
[02:35:11 PM] Deploying 3 profiles...
[02:35:11 PM] Exporting portlet metadata and customizations.
[02:35:12 PM] Creating portlet producer application for deployment.
[02:35:15 PM] Deploying a WSRP producer.
[02:35:18 PM] Wrote Web Application Module to E:\Aruna\Workspace\jdeveloper\winxp\mywork\mailtest\ViewController\deploy\mailtest_ViewController_webapp1.war
[02:35:19 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Namespace '/oracle/webcenter/collab/mail/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[02:35:19 PM] Info: Auto generated MAR archive was empty, not added to EAR.
[02:35:19 PM] Wrote Enterprise Application Module to E:\Aruna\Workspace\jdeveloper\winxp\mywork\mailtest\deploy\mailtest_application1.ear
[02:35:20 PM] Entering Oracle Deployment Plan Editor
[02:35:28 PM] Deploying Application...
[02:35:31 PM] [Deployer:149191]Operation 'deploy' on application 'mailtest_application1' is initializing on 'WC_Portlet'
[02:35:32 PM] [Deployer:149192]Operation 'deploy' on application 'mailtest_application1' is in progress on 'WC_Portlet'
[02:35:34 PM] [Deployer:149194]Operation 'deploy' on application 'mailtest_application1' has succeeded on 'WC_Portlet'
[02:35:34 PM] Application Deployed Successfully.
[02:35:34 PM] Elapsed time for deployment: 47 seconds
[02:35:34 PM] ---- Deployment finished. ----
Where can i get WSDL url? ? ?
Please anyone help me.
Thanks,
SEWSupport

Hi Hoque,
I changed the war name. Then Test Point is getting as " http://10.50.7.72:8888/ZohoMail-ViewController-context-root". But when i am clicking on that url the error message is getting like the following
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Thanks,
SEWSupport

How to find certain words based on table without overwriting the old one

Hello,
I have a list of words available in one particular table, based on those records i need to match it up with one specific column on another table. Based on that match i need to update the same. below is answer for this question;
Design a new query. Select your data table and your words table. No join line between them.
Drag datatable.* to the design grid, and the field to check. In the criteria for that field write:
Like '*' & [wordstable]![wordsfield] & "*"
(of course you change this to your object names)
But now my another question is that how i can do update without replacing the existing one. Like for example " Peter is engineering degree".
In this example if i have words like ring and degree on my reference table, then as per the solution it will update the degree first then later if its find ring on the text then it will overwrite the degree on the particular column. How i can prevent
this?
VinWin06

But now my another question is that how i can do update without replacing the existing one. Like for example " Peter is engineering degree".
I think what you are saying is that you want to avoid specious substring matches such as finding 'engineering' when searching for 'ring'. Right? If so use the following function rather than the LIKE operator to identify the 'word' rather than merely
a substring:
Public Function FindWord(varFindIn As Variant, varWord As Variant) As Boolean
   Const PUNCLIST = """' .,?!:;(){}[]/"
   Dim intPos As Integer
   FindWord = False
   If Not IsNull(varFindIn) And Not IsNull(varWord) Then
       intPos = InStr(varFindIn, varWord)
       ' loop until no instances of sought substring found
       Do While intPos > 0
           ' is it at start of string
           If intPos = 1 Then
               ' is it whole string?
               If Len(varFindIn) = Len(varWord) Then
                   FindWord = True
                   Exit Function
               ' is it followed by a space or punctuation mark?
               ElseIf InStr(PUNCLIST, Mid(varFindIn, intPos + Len(varWord), 1)) > 0 Then
                   FindWord = True
                   Exit Function
               End If
           Else
               ' is it precedeed by a space or punctuation mark?
               If InStr(PUNCLIST, Mid(varFindIn, intPos - 1, 1)) > 0 Then
                   ' is it at end of string or followed by a space or punctuation mark?
                   If InStr(PUNCLIST, Mid(varFindIn, intPos + Len(varWord), 1)) > 0 Then
                       FindWord = True
                       Exit Function
                   End If
               End If
           End If
           ' remove characters up to end of first instance
           ' of sought substring before looping
           varFindIn = Mid(varFindIn, intPos + 1)
           intPos = InStr(varFindIn, varWord)
       Loop
   End If
End Function
You can supplement this with the following functions to find any or all of multiple words in the same string expression:
Public Function FindAnyWord(varFindIn, ParamArray varWordList() As Variant) As Boolean
    Dim var As Variant
    For Each var In varWordList
        If FindWord(varFindIn, var) Then
            FindAnyWord = True
            Exit Function
        End If
    Next var
End Function
Public Function FindAllWords(varFindIn, ParamArray varWordList() As Variant) As Boolean
    Dim var As Variant
    For Each var In varWordList
        If Not FindWord(varFindIn, var) Then
            FindAllWords = False
            Exit Function
        Else
            FindAllWords = True
        End If
    Next var
End Function
You can edit the PUNCLIST constant in the first function to allow for any other terminating or leading punctuation characters which may exist, in non-English text for instance.
Ken Sheridan, Stafford, England

How to find public url of a published site on the delivery system?

Similar Messages

Maybe you are looking for