How to find R/3 field tech name with the help of BW fields.

Hi ,
How will i come to know that particular R/3 field is mapped to BW field.
for .e.g
I have BW Fields in Cubes , how can i see the R/3 field tech names for that .I can see in Infosource , but for few areas i am not able to find the infosource in sap help.com.
Pls let me know how to find the R/3 Fields for BW Fields?
Regards,
Nithi.

Hi
These are the following approaches used
1.) Check the SAP BI Content website "http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm". From here find your datasource . here u can get a list of fields in the datasource along with your R3 field and infobject.
2.) Go to Transfer rules structure of the cube or DSO, there u wuld be able to see all fields in Datasource structure fields, See the left pane and right pane. there u will se ur R3 fields and Infoobjects of BW along with their mapping.
3.) Follow this process
in R/3 system - use tcode SE11 ->ROOSFIELD -> GIVE Extract Structure & Field Name > Check Records with Version D and A.
NOTE : Make sure the fields of the datasource in R3 are not hidden , otherwise you wont be able to vierw ur data.
From
ManesH

Similar Messages

How do I find out how many fans are there in a router with the help of CLI? Specifically cisco3845 with ios c3845-spservicesk9-mz.124-3b.bin

       I have an issue where show env o/p is as below, I suspect the FAN 1 which shows failed is not present in router, how do i find out with the help of CLI , how many fans are present in router.
#show environment all
SYS PS1 is present.
       Fan status: Normal
       Input Voltage status: Normal
       DC Output Voltage status: Normal
       Type: AC
       Thermal status: Normal
SYS PS2 is present.
       Fan status: Normal
       Input Voltage status: Normal
       DC Output Voltage status: Normal
       Type: AC
       Thermal status: Normal
AUX(-48V) PS1 is absent.
AUX(-48V) PS2 is absent.
Fan 1 Failed
Fan 2 Normal
Fan 3 Normal
Fan Speed is Normal
Alert settings:
Intake temperature warning: Enabled, Threshold: 55 Core temperature warning: Enabled, Threshold: 70 (CPU: 90)
Board Temperature: Normal
Internal-ambient temperature = 28, Normal CPU temperature = 41, Normal Intake temperature = 22, Normal Backplane temperature = 19, Normal
Voltage 1(3300) is Normal, Current voltage = 3284 mV Voltage 2(5150) is Normal, Current voltage = 5153 mV Voltage 3(2500) is Normal, Current voltage = 2525 mV Voltage 4(1200) is Normal, Current voltage = 1203 mV
Nominal frequency

This means that FAN1 has failed.
Fan 1 Failed
Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported. Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.

How to read a passward protected excel file with the help of database connectivity tool kit

hi, i was reading an excel file with the help of database connectivity tool kit in labview 8.0
i made tabels in the excel file nand made odbc connection and specified the workbbok name.
now my problem is how to read the same file if i specife a pasword to that excel file ?

Hi,
Check out this thread about opening a password-protected Excel file using ActiveX. This should take care of it for you!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Regarding : How to add a user to portal group with the help of webdynpro .

Hii ,
I am working on an application in which with the help of an action( Button) we r adding a user in Ztable in R/3 , as well as group in portal.
The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
I need coding solution for " How to add a user to portal group with help of webdynpro"
Any usefull link will also do.
Pls anyone have any solution ??
Thnks in advance.
Rewards r waiting for u .

Hi,
Use UME api to add user to portal group.
Using UME API:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
Regards,
Naga

Value in input field of Hier.Node variable displays tech.name of the IO

Dear all,
we are facing an issue with Hierarchy node variable(auth.) in the selection screen of webReports.
After selecting a hierarchy node value,it is displayed along with + sign and tech.name of the Infobject in input field .
example: lets say we have Country Hierarchy and i have selected Country group 'NAM' node..This is displayed as "+NAM(ZCOUTRYGRP)". where ZCOUTRYGRP is tech.name of the InfoObject Country group.
Expected value is just "NAM" which is Key .Does anyone have solution for this? This Problem occuers when we select Level 01 value of hierarchy and we do have hierarchy node values from same INfoObject.
Regards,
Murali.
Edited by: Muralidhar c on Aug 1, 2009 1:24 PM
Edited by: Muralidhar c on Aug 3, 2009 10:40 AM

it works as designed.found in sap help.

How to find SAP Scirpt/ smart forms names?

Dear all,
How to find all SAP Scirpts& smartforms names for all apllications?

Hi ramesh,
<b>SAPSCRIPTS</b>
1. Method1: In TNAPR table the driver program name and form nanes will be stored
go to se11 enter tnapr table
give the form name and execute u will get the driver program of that particular form
fields,
PGNAM - Program name
FONAM - Form name
Method 2 :
1. Go to nace
2. select application (eg, EA)
3. click output type button and select output type
(eg, NEU)
4. double click on processing routines
5. Application - EA
Output Types - NEU (RFQ)
Program - program name
Form - Form name
u can get there
Method 3 :
if u want to directly see without going to nace
1. in se11 give view name as VN_TNAPR
2. execute it
3. it will ask for o/p type and application give it
4. then u can directly go to nace "display view processing routines" screen

HT5973 Maps has errors in it. It shows my subdivision with all of the houses, but shows the streets and street names in the middle of a field about a mile down the road. How do I report this to get it fixed.

How do I get errors in Maps corrected? It shows the subdivision I live in, The streets and houses are in the correct place, however it does not name the streets. It then shows the correct street names in the middle of a field about a mile down the street from my subdivision.

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

How find print program and form name from the spool list

Hi,
I have a requirement to find print program and form name from the spool list.
I got the list of programs and forms from TNAPR table, I also want to find out any custom program sending the form directly to the spool.
Cheers
Sam

Hi
Try TSP01-Suffix2
Regards
Raj

How to find the interface with the help of target table name

Hi friends,
Whether with the help of target table name, is it possible to find the interface name that invokes this target table in ODI 11.1.1.7.
Thanks in advance.
Regards,
Saro

highlight the datastore in the navigator, expand its sub tree, there is a 'populated by' node, under the node, it will list all datastores which are used as sources to the current datastore
then expand 'used by'->interfaces, it will show all interfaces which include current datastore(but maybe current datastore is used as source)
that's all you can get from UI, otherwise I suppose you can use SDK.

How to find a concurrent request's responsibility of the FND user

How to find a concurrent request's responsibility of the OA user who submitted?
For example, I have a concurrent request id: 123, I know user A submitted,
I want to know user A's Responsibility when submitting the request id: 123.
Thanks

Hi,
I'm not sure about this, but can you check whether FND_CONCURRENT_REQUESTS.RESPONSIBILITY_ID provides you with the RESPONSIBILITY_ID of the user from which the request is triggered ? If yes, joining this with FND_RESPONSIBILITY_VL.RESPONSIBILITY_NAME can give you the name of the executing responsibility.
Regards,
Rakesh.

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

How to find users who are running IE with different credentials ?

How to find users who are running IE with different credentials ?
Is there any tool or a solution in the market will help or a i can use GPO or even Power Shell ?
thnx & Regards ,,

Hi Salman,
Based on your description, we can use Windows Credential Manager to check this. Windows Credential Manager stores credentials, such as user names and passwords that we use to log on to websites or other computers on a network.
Regarding Credential Manager, the following article can be referred to for more information.
Credential Manager
http://windows.microsoft.com/en-in/windows7/what-is-credential-manager
Manage passwords in Internet Explorer using Credential Manager
http://www.thewindowsclub.com/manage-passwords-internet-explorer-10
Please Note: Since the above website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

This helped, I restored them, but when I go to iTunes they are not there. Is there another step?

How to find R/3 field tech name with the help of BW fields.

Similar Messages

Maybe you are looking for