How to find Rec key though FICO document?

Hi
Eexperts
I posted payment document Fica to fico,now i want to know recon key through taht doc no how it is possible?
abasha

Hi,
To further clarify Harsha's point about the reference key, the Recon Key is part of the the Reference Key, i..e. it is embedded in the Reference Key, the first 12 characters of the Reference Key is the recon Key.
IS-U transaction FPG1 shows the linkage between the the FI-CA documents and the GL Documents (for a different view).
Ivor Martin.

Similar Messages

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

How to find Primary Key for a particular SAP Databse Table?

Hi Guys,
How to find Primary Key and foreign key for Particular SAP Databse table ?for Ex : EKKO , EKPO , EKKN , EKBE , EKBEH , EKET and EKETH.
Thanks,
Srinivas.

Use transaction SE11 to display the table. Put the cursor on the field you want to display the check table and click 'Foreign key' push button (a key with an bottom point arrow), then it will show the check table of the foreign of a field.
Or by just simple double click on the field, a pop-up window of all the attribute (including the foreign key and the check table if exists) will show too.
Please reward point for helpful answer.
Minami

How to find multiple keys in single cell using Numbers?

I'm trying to add functionality to one of my Numbers tables where want to check a single cell for multiple keywords from a list. The hole thing works perfectly fine in Excel but it behaves differently in Numbers.
The formula I am using is:
=IF(ISERROR(LOOKUP(2^15;FIND($E$2:$E$11;A2)));"not found";"found")
The following screenshots show that it correctly finds the keys in the cell when using Excel but not in Numbers. Although, it seems to work if the key is in the same row as the input cell.
Excel table using the formula I posted in the C column:
Numbers table using the formula I posted in the C column:
Would be really happy if somebody knows how I could accomplish that!
Cheers,
Maik

If you are working in Numbers you can do this efficiently with a small AppleScript without going back to Excel or clone. One click and you get the following result:
This script works with Numbers 2.3, which your screenshot suggests you are using. If you are using Numbers 3 it needs a very small adjustment.
This is the script:
--https://discussions.apple.com/thread/6315365?tstart=30
property inputCol : 1 --> col A, as in example
property resultCol : 3 --> col C, as in example
property keysCol : 5 --> col E, as in example
property targDoc : 1 --> 1 is front document; can change to "MyDocName"
property targSheet : 1 --> 1 is first sheet; can change to "MySheetName"
property targTable : 1 --> 1 is first table; can change to "MyTableName"
tell application "Numbers"
          set t to document targDoc's sheet targSheet's table targTable
          set keysList to t's column keysCol's cells's value
          repeat with i from 2 to t's row count -- assumes 1 Header Row
                    set inputVal to t's row i's cell inputCol's value
                    if inputVal is not 0 then --skip blank cells; Numbers 2 reads blanks as 0
                              --check if Input matches a key:
                              if inputVal is in keysList then
                                        set t's row i's cell resultCol's value to "found"
                              else
                                        set t's row i's cell resultCol's value to "not found"
                              end if
                              --check if Input contains a key:
                              repeat with aKey in keysList
                                        if inputVal contains aKey then set t's row i's cell resultCol's value to "found"
                              end repeat
                    end if
          end repeat
end tell
--end of script
To run, copy into AppleScript Editor, change the properties if needed, and click the green triangle 'Run' botton.
SG

How to find out, whether an input document of a process is IRM-protected?

Having an LiveCycle process with an input variable of type document.
How to find out, whether the document is a standard PDF or an IRM-protected PDF?
Thanks,
Dilettanto

Really no way to tell from a given PDF-file, whether it is IRM-protected?

FI - How to find KOSTL for Single FI Documents / Invoices

Hi experts,
can someone explain me how to find the reight KOSTL for every Single Document/Invoice. Because the Filed within BSEG does not always contain
the information (=empty). e.g for Documents in BSEG with KOART = 'A' or 'S' etc...
Many Thanks in advance.
Ali

Hi Eric,
this is exactly the point. I am trying to Extract towards BW with the
0FI_GL_4 Datasource all Items for Debits / Kredits whisch are mostly coming from the (BSID/BSAD) / (BSIK/BSAK) but for the most records i do not have a Costcenter. But what i know is that for example Items with the KOART 'A' Assets have a costcenter assigned somwehere in the table ANLZ. What i am looking for are the rules with which i can get
the KOSTL the diffrent KOART's in the BSEG.
Which tables and conditions do provide the KOSTL for
KOART EQ 'A' / 'S' / 'M' / 'D' or 'K'. I am new to FI and do not exactly
now the relations / tables.
With that information i will enhance my Extract to that selection logic and i will be fine
hopefully
many thank in advance to all who can help out with any kind of information to that topic.
Regards,
Ali

How to find message key to OBIEE11

We´d like to customize a couple of OBIEE11 msgs - I know where are the files, etc... OTH there are several msgs per file... so if I need to change a specific message.. it should be in some of the files...The issue is how to find it ? Is there a simple way ? other than opening each file...
Txs
Antonio

txs. for your comments... but the troube is to find the specific msg in one of those files... Isn´t there a way - lets say when you are in answer 'looking at the msg in the screen' to find some info about it ? like key ? which file it is in ?
txs

How to find foreign key in pl/sql

Error starting at line 1 in command:
DELETE FROM ZKET_SOLE WHERE IID_SOLA = 1
Error report:
SQL Error: ORA-02292: integrity constraint (IRCKIS.ZKETSTIP_ZKET_FK) violated - child record found
02292. 00000 - "integrity constraint (%s.%s) violated - child record found"
*Cause: attempted to delete a parent key value that had a foreign
dependency.
*Action: delete dependencies first then parent or disable constraint.
i need to find foreign key but i do not know how. I know that it must be in dictionary but i can not find it. I do not have access to ER model.
Thx

You could use a query similar to this:
SELECT ucc.constraint_name,ucc.table_name,ucc.column_name
FROM user_cons_columns ucc
JOIN user_constraints uc on uc.constraint_name=ucc.constraint_name
WHERE CONSTRAINT_TYPE='R'You could also use the ALL_CONSTRAINTS / ALL_CONS_COLUMNS views.
Hope this helps!

How to find scrollLock key state

How to find the scrollLock key state in actionacript3.0.
Like Caps Lock and num Lock on/off state.

am I right, that you don't want to know, that the KEY-COMMIT or KEY-DELREC or something else is pressed,
what you want is : which trigger can be used, so that in the trigger-code can be detected, which KEY has fired. And the answer should then be "F10" and not "KEY-COMMIT"
it that your question ?
Gerd

NEED HR KEY(HOW TO FIND THIS KEY)

HI,
I am working with EE 4.7 version, can i use this version for HR module.. will it be possible. DO i need to install any other softwares with this package.. I aslosa looking for the HR module key.. Could u please tel me where to find this key in my PC.
thanking you,

Hello Jijay
If the software component SAP_HR is installed on your SAP system then you have the HR module available. The dependencies between software components can be seen using transaction SPAM.
For example, on ECC 5.0 SAPKE50004 (SP 04 for SAP_HR 5.0) requires
- SAPKA64009 (SP 09 for SAP_ABA)
- SAPKB64009 (SP 09 for SAP_BASIS)
- SAPKE50003 (SP 03 for SAP_HR 5.0)
- SAPKW35009 (SP 09 for SAP_BW 3.5)
Regards
Uwe

How to find Assertion key value?

Hi,
I am referring MSDN article for Management Libraries for .NET to access my Azure AD account.
I followed all steps from article, but when my application execution starts it gives an error
"An unhandled exception of type 'Microsoft.IdentityModel.Clients.ActiveDirectory.AdalServiceException' occurred in Microsoft.IdentityModel.Clients.ActiveDirectory.dll
Additional information: AADSTS90014: The request body must contain the following parameter: 'client_secret or client_assertion'."
c# block where I caught in error--
AuthenticationResult result = context.AcquireToken(
ConfigurationManager.AppSettings["apiEndpoint"],
ConfigurationManager.AppSettings["clientId"],
new Uri(ConfigurationManager.AppSettings["redirectUri"]));
my context variable as below
var context = new AuthenticationContext(string.Format(
ConfigurationManager.AppSettings["login"],
ConfigurationManager.AppSettings["tenantId"]));
and when I am trying to add client_secrete key to code
AuthenticationResult result = context.AcquireToken(
ConfigurationManager.AppSettings["apiEndpoint"],
new ClientCredential("*******", "******"),
new UserAssertion("*****", "client_credentials", "*****"));
throws an error
An unhandled exception of type 'Microsoft.IdentityModel.Clients.ActiveDirectory.AdalServiceException' occurred in Microsoft.IdentityModel.Clients.ActiveDirectory.dll
Additional information: AADSTS50027: Invalid JWT token. AADSTS50027: Invalid JWT token. Token format not valid.
please tell me proper solution where I making mistake and also help to find Assertion key value for application which are added on Azure AD portal.
thanks,
Yogesh

Hello Yogesh,
Since this issue is related with window azure AD, i move it to the azure ad forum, there are AD experts who will hlep you. The current forum you posted to is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O,
Regigistry, Globalization, Reflection.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Find fonts in a FM10 document

Could a fellow FM10 user tell me how I could search a document to find a particular font. The reason I want to do this is I have inherited a rather long document and have discovered (visually) a number of fonts that should have not been used. I suspect that there are more which just visual inspection would not reveal. I had hoped FM would have a function like Edit > Find/Change <a font name> but it does not appear to be this straightforward.
Thanks.

Use the Fonts pod (View > Pods > Fonts...) to see what fonts are being used in the document, e.g.
Highlight the font you wish to find/change and eithr click on the Font replace button (the "A" with the swooping arrow under it) or double click on the font name.
You will then get the Font Replace panel, which shows you all instances of the font usage in the document, e.g.
Double-clicking on the entries here will move the insertion point to the location where the font is being used.
After inspecting, you can the decide if you want to do a global replacement using the Font Replace panel. Note: this works very well.

How to find page sizes in a document with multiple page sizes

Hi Ive been given a document that has multiple page sizes in it how do i find the size of each individual page. i tried document setup but that only brings up the size of the first page

You are going to do that for each page? You might be better off with using the Preflight panel. "Page size" can be flagged as an error, so you get a nice linked list.

How to find product key for Microsoft Office 2010?

I purchased an HP Pavilion dv6 a couple of years ago. At the time of purchase I also ordered a license for Microsoft Office 2010. The laptop came with Office already installed, and everything worked great for years.
Earlier this week I had to do a full system restore to get my laptop back in working order. I backed up all of my user files, found installers or original installation media for all of my software except for Office, and proceeded with the system restore.
I just got everything running again this morning. The system restore put a clean copy of the OS on my laptop, but Microsoft Office is gone. I've just about finished re-installing all of the other software, but I need some help with Office.
Since my laptop didn't come with installation media for Microsoft Office 2010 I'm trying to donwload it from here:
https://www2.downloadoffice2010.microsoft.com/usa/registerkey.aspx?culture=en-US&ref=pkc
It asks for a product key for Office 2010 in order to start the download. The product key for Microsoft Windows is on the bottom of my computer, but I can't find a product key for Office. (Before anyone asks, yes, this is the full version of Office 2010, and yes, I paid for it at the time of purchase of the laptop.) I kept all of the paperwork that came with the computer, but I can't find the Office product key anywhere in that packet. Is there somewhere else I should be looking for my product key?
Better yet, does HP still have a copy of my original purchase order for this laptop, and do they store product keys for the products they sell?
Thanks,
Tom

Neither HP nor Microsoft keep a record of the key that was issued. If you cannot find it in your documentation or emails I'm afraid you are out of luck and would have to purchase another key.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How to Find Product Key

I recently took over as a Tech Coordinator at a K-12 school. I have group licensing for Adobe Captivate 3. My predecessor wrote the product key on the outside of the case with pen and now it is smudged. I sent an Email to Adobe support but they said that they cannot find the serial number in the registration database. Is there any way to find the product key? Perhaps through the registry? Thanks in advance for the help.

If your notebook came with the English version of W8 64 bit you can download the correct W8 ISO file and use this tool to make a bootable flash drive to install it, and it should work just fine. You need a 4 GB flash drive.
http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
Below is the link to get the W8 ISO file you need. See Huffer's post.
http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Need-Product-key/m-p/2592907#M96681
If you do not have the English version of W8, then you will either need to buy recovery disks for your specific model or purchase W8 OEM for the language your OS came in or buy Windows 7 and we can probably try and find the drivers you need as W7 is not supported by HP in W8.
Recovery disks from another model will not work. Has nothing to do with the product key.
The product key is there.

How to find Rec key though FICO document?

Similar Messages

Maybe you are looking for