How to find SAP  java realted roles for ABAP and Basis

Hi Gurus,
I am new in SAP Security First week, I got the assignment to find the SAP Roles and Trans for ABAP and Basis in all Systems like Ecc, BI, ......
I use SE16 ->AGR_TCODES then SAP* in Table Name it give me all SAP Roles and Trans.
Pls help me to get only SAP Java and Basis roles and Trans Seperately
Thanks

Hi,
Are you speaking about the standrad SAP roles? If yes, you can have a look at BC and ABAP roles. However, if your question is about the created roles, you should see the convention that was followed in your organization to identify the roles.
Rgds,
Raghu Boddu

Similar Messages

  • How to find SAP Script Form name for an particular transaction

    Hi,
    I had an issue, in the transaction F110  Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
    Thanks in advance.

    >
    Muralidhar Medisetty wrote:
    > Hi,
    >
    > I had an issue, in the transaction F110  Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
    >
    > Thanks in advance.
    hey
    NACE is the transaction ..for this u must know the output type..
    Script for Cheque Printing and Payment Advice can be known from Transaction FBZP...
    FBZP -> paying Company Codes -> u will get Script used for Payment Advice
    FBZP -> Pmnt methods in company code -> u will get Script used for Cheque Print
    ....Give points if useful.....
    Edited by: Satyabrata sahoo on Oct 14, 2008 4:42 PM

  • Who can tell me how to find the leave request Webdynpro for ABAP iview

    Hi,Expert,
    As I know Portal only has Webdynpro for java iview for leave request iview in the past.
    but someone tell me SAP portal has delivered some new standard WebDynpro for ABAP iview.
    I have a requirement to create a employee role for new Leave Request service created by WD ABAP . Under Content Provided by SAP in Content Administration, I couldn't find the iView assocated to the leave request except the Java one. Is there have any Employee Self-Service Web Dynpro ABAP workset ?
    thanks
    Olivia

    The business package for ESS based on Webdynpro for ABAP is available only for ECC 6.0 EHP5.
    If you are on EHP5, you may choose to use this version of the BP.
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/25/340b0507434193adbfe3f8fc8896c7/frameset.htm
    Leave Request application:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/1f/a073be62744fcca7e1fae9942f0031/frameset.htm
    Thanks,
    Shanti

  • How to find SAP specifical Object IDs for xMAM?

    Hi,
    I need more details about the filling of transfered custom fields via BAdI for MAM30_011_CREATE, Notification creation (Object-ID).
    I have got a Problem to create an Mam010Item040 Object. I must insert an Object ID and i don't know where I can find it. In the R3 System the Object ID is created automaticly, but if I set the Object ID to "null" the Mam010Item040 Object is deleted after Synchronisation. If I type in an own Object like 00010001 (0001 for the first Objekt and the last 0001 for the Position of an Notification) i recive an error ("09.03.2009 07:42:45 Returncode von RFC-BAPI-Verschalungsaufruf:Objekt nicht vorhanden (Statusverwaltung)").
    I work with
    MI 70 SP 16 Patch 0 Build 200806100346
    Can someone help?
    Best regards
    Hendrik Bendicks

    I have the user id for the output/ invoice
    But when I go to SM37.....there are tons of jobs on a particular day for th user id. And that also all for Billing Due list.
    Just want to find the the right job name which created this output/invoice

  • How to find out last update date for business partner's marketing attribute

    How to find out last update date for business partner's marketing attribute??
    Im freshie for SAP Application and im assigned to find out last update date for marketing attribute changed
    which table is involved??
    Yours kindness will be appreciated
    thanks

    You can take a look at table AUSP as well as CRMD_AUSP_HIST.
    The "changed by" and "changed at" are logged on attribute level, not on attribute value level. When you change one specific value, the system does a "re-insert" of all existing values of this attribute.
    Take a look at the SAP notes 938426 and 966670  these may assit you in resolving the issue.
    Regards,
    William Laverde

  • How to find the exact user exit for our requirement?

    Dear Mr. keerthi,
    can you please explain me how to find the exact user exit for our requirement?

    Hi sandip
    There is more than one method in which you can check for user-exits.The following method is used very often.
    <b>How to find the exact user-exit for your requirement.</b>
    1.     You can check the user exists using transaction SE85.
    2.     Repository Information System -> Enhancements -> Customer exits
    3.     You can search the user-exits by package name.
    4.     Double click on each exit name to check the function module exits.
    <b>The procedure to find the package name.</b>
    Execute transaction SE93 
    Enter the tcode of the transaction for which you want to check the user exit.
    Example: if you want to find the user-exit for purchase orders while changing, enter ME22n  and press display.
    You will get to see the package name
    But you need to confirm that the user exit will get triggered at the appropriate event.
    ( example: you might want some validations to be done ON SAVE of a purchase order)
    <b>Checking if the user-exit is getting triggered or not.</b>
    1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
    2.     Click on where used button. In the pop up that immediately appears choose only programs .
    3.     You will get a list of programs. Double click on the program name.
    4.     You will get the list of location where this function module user exit is used.
    5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
    6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
    regards,
    Prasad

  • How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

    Hi all,
    I am new to this community p
    i have issue regarding  the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
    thanks,

    Hi ,
    welcome to SDN.
    You can select the appropriate Customer exit accrding to the available parameters .
    The list of exits available are 
    EXIT_SAPLVEDF_001
    EXIT_SAPLVEDF_002
    EXIT_SAPLVEDF_003
    EXIT_SAPLVEDF_004
    For Example , if you want  to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
    Hope this Helps
    Rgds
    Sree
    Edited by: Sree on Jul 23, 2010 12:11 PM

  • How to find that a sales order for which there is  delivery but no goods

    Hi
    How to find that a sales order for which there is  delivery but no goods issue has been done i.e we have an open delivery for a sales order.
    How in VBUK table can we find  out with the sales order no .
    Thanks in advance

    make use of table VBFA.
    Regards
    Peram

  • How to find suitable( existing) function group for a Function Module ?

    How to find suitable( existing) function group for a Function Module to be created?
    This is FM for converting amounts to text.

    Hi,
            If you are not sure into which Function group your FM should go in then its advised to create a Function group of your own. Its not advised to create a function module in any other function group unless its owned by you since your FM can get deleted by others or it can get changed.
    Create your own Function group. But if you want to create in an existing FG then best way is to find out the Function Group by searching for suitable existing Function module then see their function group
    Regards,
    Sesh

  • How to find whether MIRO is done for a PO

    Hi All,
    Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
    I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
    Helpful tips will be gratefully rewarded...
    Regards,
    Karthik

    See if an entry exist in EKBE for the PO Number and its items.
    The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
      SELECT EBELN
             EBELP
             MENGE
             LOEKZ
        FROM EKPO
        INTO TABLE LT_EKPO
       WHERE EBELN = P_EBELN.
      IF NOT LT_EKPO[] IS INITIAL.
        SELECT EBELN
               EBELP
               MENGE
               BEWTP
               GJAHR
               BELNR
               BUZEI
               SHKZG
          FROM EKBE
          INTO TABLE LT_EKBE
          FOR ALL ENTRIES IN LT_EKPO
         WHERE EBELN = LT_EKPO-EBELN
           AND EBELP = LT_EKPO-EBELP
           AND VGABE = '1'.
      ENDIF.
      LOOP AT LT_EKBE.
    * Change the sign of the quantity for debit
        IF LT_EKBE-SHKZG = C_SHKZG_H.
          LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
        ENDIF.
        MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
        COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
        CLEAR LT_EKBE_SUM.
        ENDLOOP.
       loop at it_ekpo.
    ** For each line item, calculate the total GR Quanity
        READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
                                        EBELP = LT_AWKEY-EBELP.
        IF SY-SUBRC = 0.
    * If the PO Item Quantity is equal to GR Quantity
            IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
    * The PO Item can be considered completed GRed
            ENDIF.
        ENDIF.
      ENDLOOP.

  • How to find the profit center group for a profit center?

    How to find the profit center group for a profit center?

    Hi,
    try this also
    In order to pass the setid parameter of the FM, you have to concatenate the following things
    Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
    In my example below, I have declared as constants and concatenating to gv_setid.
    gc_01016 is the set id for profit centers
    gc_kokrs is the controlling area
    gp_pprct is the Profit Center group entered in the selection screen.
    You will get KOKRS value from the cepc-kokrs.
    data :   gc_0106(4)   TYPE c VALUE '0106',
               gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
               gv_setid          LIKE sethier-setid,
               gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
      CONCATENATE gc_0106  gc_kokrs gp_pprct INTO gv_setid.
      CONDENSE gv_setid.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
        EXPORTING
          client                    = sy-mandt
          fieldname                 = 'RPRCTR'
          langu                     = sy-langu
          setid                     = gv_setid
          tabname                   = 'GLPCT'
          no_table_buffering        = 'X'
        TABLES
          set_values                = gt_set_values_1
        EXCEPTIONS
          set_not_found             = 1
          illegal_field_replacement = 2
          illegal_table_replacement = 3
          OTHERS                    = 4.
    By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
    Regards,
    Venkatesh

  • How to find out Max threads count for Custom Work Manager??

    Hi All,
    How to find out Max threads count for Custom Work Manager??
    I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
    I need to check how many threads maximum were created by my WM after lets say 1 completed day.
    The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
    Any Idea?
    regards,
    Tanmay

    Hi Ashish,
    Thanks for your response.
    The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
    For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
    Any pointers in this regard are appreciated.
    Thanks,
    Tanmay

  • How to find the existing request no for Smart form

    Hi Experts,
    plz tell me how to find the existing request no for Smart form in ABAP.
    thanks in advance.
    regards,
    radhika.

    Radhika,
    Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
    Regards
    Narasimhan

  • How to find a Transport Request no for Task or Workflow Template

    Hi All,
    Any body tell me.
    How to find a Transport Request No for Task or Workflow Template.
    Thanks,
    Lakhshmi.

    Hi.
    Next to the options already mentioned you can also try transaction SE03.
    Select: Search for objects in Requests/Tasks.
    Next, fill an empty line with the objectnumber you want to search (don't forget the checkbox).
    For workflow tasks use the object type PDTS, for workflow templates use PDWS.
    Kind regards,
    Jasper Blok

  • How to find programatically the installation location for Mysql?

    How to find programatically the installation location for Mysql?

    There are thousands of them. Probably hundreds of thousands. If you had a particular one in mind, just ask the person who set it up. There's no point in trying to write code for that, since you only need to ask once and put the location in your code.

Maybe you are looking for