How to find security code in debit card

Hi friends....plz help me to fill my account details to purchase from App Store....how to find the security code from my debit card???

If debit cards are accepted in your country, and if that particular card is accepted, then does it not have a security code on its signature strip
Card security code : http://support.apple.com/kb/HT3541

Similar Messages

  • HT201912 How to find secure code on master card of debit card

    Cant review the apple id have a debit card but cant getting the secure code

    jaredfs wrote:
    i think on a master card it might be the 4-digit number on the front, slightly above and to the right of the raised numbers for the actual account.
    No, on a MasterCard, it's a 3-digit number printed on the back. It's American Express that has a 4-digit number on the front.

  • How to get Security Code in Payment Card

    Every time i used to enter security code, but it says invalid, please help me in this.

    Hi ankurverma,
    It seems you are unable to enter the security code for the credit card associated with your Apple ID. You may want to consider reviewing the following article. It may help you find a solution:
    iTunes Store: My credit card's security code or zip code does not match my bank's records - Apple Support
    When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
    In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
    You can verify and/or modify your billing address by following these instructions:
    Open iTunes.  If you are signed in to iTunes, skip to step 4.
    Note: Verify that you are signed in to the correct iTunes account. If you are unsure which account you're signed into, choose Store > Sign Out and proceed to step 2.
    Choose Store > Sign In.
    Enter your account name and password, then click the Sign In button.
    Choose Store > View My Account.
    Click the Edit Payment Information button.
    In the Payment Method section, choose None.
    Click the Done button at the bottom of the page.
    Click the Edit Payment Information button again.
    Enter your billing address exactly as it appears on your credit card statement.
    Select your credit card type in the Payment Method section.
    Enter your credit card information, your card's security code, and the expiration date.
    Click the Done button at the bottom of the page.
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • How to find security code for Airport Extreme

    I need to find the security code for my Airport Extreme to connect to my Smart TV

    Unfortunately, locating the long 64 character code will rarely ever help, since most products will not accept a code of this length.
    Nonetheless.......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Edit
    Click the Base Station menu at the very top of the screen
    Click Show Passwords

  • HT3702 I'm TRYIN to dwnload an app however it's fails bc the security code on my card is incorrect however it is correct how can I resolve this issue

    I'm TRYIN to dwnload an app however it's fails bc the security code on my card is incorrect however it is correct how can I resolve this issueU

    This happens to me as well

  • HT4061 how to find puk code to iPad

    how to find puk code to iPad

    It is located on the card that held your sim, if you do not have that, you need to contact your carrier.

  • Trying change my credit card info from previously lost credit card but can't since it says I'm accessing from new device and asks for security code for a card i no longer have. What can I do?

    I've recently gotten a new laptop and replaced my damaged iphone. Apparently these 2 scenarios qualify as "new devices". This is fine but I also had lost my credit card previously that was connected to my iTunes account, and got a new one with all different numbers. When I try to change my billing information to this new card it won't let me because it says
    "Your account has been accessed from a new device, and you must verify your payment information before you can make purchases."
    and it asks for the security code of the card I had lost and replaced! I am not able to change my billing info to my new card thus because I can't get past this.
    Can anyone please help?

    Contact iTunes Customer Service and request assistance
    Apple  Support  iTunes Store  Contact Us

  • How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

    How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

    Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
    To change the card, go to your account settings and change the information to your new card, and hit save.

  • How to find function code for buttons on toolbar in oops alv

    Hi experts,
    I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
    method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

    Hi Prakash,
    -->First you have to set the pf status in your alv program by,
    {FORM pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'FIRST'.
    ENDFORM.                    "PF_STATUS}
    -->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
          i_callback_pf_status_set          = 'PF_STATUS'}
    *-->Then doble click on that pf status,
    From the menu bar, select Extras->Adjust Template->List Viewer,
    This will give you the existing statndard gui status of the program*
    ->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
          i_callback_user_command           = 'COMM'
    And make a subroutine of the name 'COMM'i.e,
    FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
      DATA: okcode TYPE sy-ucomm.
      okcode = ucomm.
      CASE okcode.
        WHEN 'REF'.
        CALL FUNCTION 'POPUP_TO_INFORM'
          EXPORTING
            titel         = 'MANSI'
            txt1          = 'CREATED BY'
            txt2          = SY-UNAME
          TXT3          = ' '
          TXT4          = ' '
    endcase.
    Hope it helps you
    Regrds
    Mansi

  • How to find Transaction code from Report/program name ?

    Dear all,
    How to find Transaction code if i know Report/program name ?

    Hi,
    In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
    if any transaction is created for the program u can find it under the transaction folder.
    revert back for further queries.
    Regards,
    Sravanthi

  • HT204053 how do i remove my credit/debit card info off of my itunes account?

    how do i remove my credit/debit card information from my itunes account?

    Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
    To change the card, go to your account settings and change the information to your new card, and hit save.

  • How to find acount code in R12

    Hi,
    How to find account code details in R12? Which table contains account code details?
    Thanks

    Thanks Sanjay, I would like to know account code and their name and active status also. do you think there is another table also.

  • TS1646 I'v tried many times to update my applications however, my account can't do it because security code for my card is incorrect note that I'm sure my card details are correct completely so i need help to fix it as much as you can plz. Thnks

    Hi
    I'v tried many times to update my applications however, my account can't do it because security code for my card is incorrect note that I'm sure my card details are correct completely so i need help to fix it as much as you can plz. Thnks

    Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
    If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
    Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
    I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

  • How to find bar codes and mails to send clients in smartforms

    HI friends,
        How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
    Thanks in Advance.
    Saradhi.

    Hi!
    Here is the code to send the Smartform to mail as PDF attachment.
    *& Report ZTEST_PDF_MAIL
    REPORT ZTEST_PDF_MAIL.
    Internal Table declarations
    DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
    I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
    I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
    I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    Objects to send mail.
    I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
    I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
    Work Area declarations
    WA_OBJHEAD TYPE SOLI_TAB,
    W_CTRLOP TYPE SSFCTRLOP,
    W_COMPOP TYPE SSFCOMPOP,
    W_RETURN TYPE SSFCRESCL,
    WA_DOC_CHNG TYPE SODOCCHGI1,
    W_DATA TYPE SODOCCHGI1,
    WA_BUFFER TYPE STRING, "To convert from 132 to 255
    Variables declarations
    V_FORM_NAME TYPE RS38L_FNAM,
    V_LEN_IN LIKE SOOD-OBJLEN,
    V_LEN_OUT LIKE SOOD-OBJLEN,
    V_LEN_OUTN TYPE I,
    V_LINES_TXT TYPE I,
    V_LINES_BIN TYPE I.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    FORMNAME = 'ZTEST'
    IMPORTING
    FM_NAME = V_FORM_NAME
    EXCEPTIONS
    NO_FORM = 1
    NO_FUNCTION_MODULE = 2
    OTHERS = 3.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    W_CTRLOP-GETOTF = 'X'.
    W_CTRLOP-NO_DIALOG = 'X'.
    W_COMPOP-TDNOPREV = 'X'.
    CALL FUNCTION V_FORM_NAME
    EXPORTING
    CONTROL_PARAMETERS = W_CTRLOP
    OUTPUT_OPTIONS = W_COMPOP
    USER_SETTINGS = 'X'
    IMPORTING
    JOB_OUTPUT_INFO = W_RETURN
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    I_OTF[] = W_RETURN-OTFDATA[].
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    FORMAT = 'PDF'
    MAX_LINEWIDTH = 132
    IMPORTING
    BIN_FILESIZE = V_LEN_IN
    TABLES
    OTF = I_OTF
    LINES = I_TLINE
    EXCEPTIONS
    ERR_MAX_LINEWIDTH = 1
    ERR_FORMAT = 2
    ERR_CONV_NOT_POSSIBLE = 3
    OTHERS = 4.
    IF SY-SUBRC <> 0.
    ENDIF.
    LOOP AT I_TLINE.
    TRANSLATE I_TLINE USING '~'.
    CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
    ENDLOOP.
    TRANSLATE WA_BUFFER USING '~'.
    DO.
    I_RECORD = WA_BUFFER.
    APPEND I_RECORD.
    SHIFT WA_BUFFER LEFT BY 255 PLACES.
    IF WA_BUFFER IS INITIAL.
    EXIT.
    ENDIF.
    ENDDO.
    Attachment
    REFRESH: I_RECLIST,
    I_OBJTXT,
    I_OBJBIN,
    I_OBJPACK.
    CLEAR WA_OBJHEAD.
    I_OBJBIN[] = I_RECORD[].
    Create Message Body Title and Description
    I_OBJTXT = 'test with pdf-Attachment!'.
    APPEND I_OBJTXT.
    DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
    READ TABLE I_OBJTXT INDEX V_LINES_TXT.
    WA_DOC_CHNG-OBJ_NAME = 'smartform'.
    WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
    WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
    WA_DOC_CHNG-SENSITIVTY = 'F'.
    WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
    Main Text
    CLEAR I_OBJPACK-TRANSF_BIN.
    I_OBJPACK-HEAD_START = 1.
    I_OBJPACK-HEAD_NUM = 0.
    I_OBJPACK-BODY_START = 1.
    I_OBJPACK-BODY_NUM = V_LINES_TXT.
    I_OBJPACK-DOC_TYPE = 'RAW'.
    APPEND I_OBJPACK.
    Attachment (pdf-Attachment)
    I_OBJPACK-TRANSF_BIN = 'X'.
    I_OBJPACK-HEAD_START = 1.
    I_OBJPACK-HEAD_NUM = 0.
    I_OBJPACK-BODY_START = 1.
    DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
    READ TABLE I_OBJBIN INDEX V_LINES_BIN.
    I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
    I_OBJPACK-BODY_NUM = V_LINES_BIN.
    I_OBJPACK-DOC_TYPE = 'PDF'.
    I_OBJPACK-OBJ_NAME = 'smart'.
    I_OBJPACK-OBJ_DESCR = 'test'.
    APPEND I_OBJPACK.
    CLEAR I_RECLIST.
    I_RECLIST-RECEIVER = '[email protected]'.
    I_RECLIST-REC_TYPE = 'U'.
    APPEND I_RECLIST.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    DOCUMENT_DATA = WA_DOC_CHNG
    PUT_IN_OUTBOX = 'X'
    COMMIT_WORK = 'X'
    TABLES
    PACKING_LIST = I_OBJPACK
    OBJECT_HEADER = WA_OBJHEAD
    CONTENTS_BIN = I_OBJBIN
    CONTENTS_TXT = I_OBJTXT
    RECEIVERS = I_RECLIST
    EXCEPTIONS
    TOO_MANY_RECEIVERS = 1
    DOCUMENT_NOT_SENT = 2
    DOCUMENT_TYPE_NOT_EXIST = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR = 5
    X_ERROR = 6
    ENQUEUE_ERROR = 7
    OTHERS = 8.
    IF SY-SUBRC <> 0.
    WRITE:/ 'Error When Sending the File', SY-SUBRC.
    ELSE.
    WRITE:/ 'Mail sent'.
    ENDIF.
    If you want to send some text as Body of the Mail then follow this once
    when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
    1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
    2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
    I_OBJPACK-TRANSF_BIN = ' '.
    I_OBJPACK-HEAD_START = 000000000000001.
    I_OBJPACK-HEAD_NUM = 000000000000001.
    I_OBJPACK-BODY_START = 000000000000002
    I_OBJPACK-BODY_NUM = 000000000000010.
    I_OBJPACK-DOC_TYPE = 'RAW'.
    append I_OBJPACK-.
    by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    DOCUMENT_DATA = WA_DOC_CHNG
    PUT_IN_OUTBOX = 'X'
    TABLES
    PACKING_LIST = I_OBJPACK
    OBJECT_HEADER = WA_OBJHEAD
    CONTENTS_BIN = I_OBJBIN
    CONTENTS_TXT = I_OBJTXT
    RECEIVERS = I_RECLIST
    EXCEPTIONS
    TOO_MANY_RECEIVERS = 1
    DOCUMENT_NOT_SENT = 2
    DOCUMENT_TYPE_NOT_EXIST = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR = 5
    X_ERROR = 6
    ENQUEUE_ERROR = 7
    OTHERS = 8.
    Regards
    Tamá

  • I'm trying to make a payment on my iPhone to AppStore but it keeps asking me for my security code from my card and now it just tells me to come here for support

    I'm trying to make a payment on my iPhone to AppStore but it keeps asking me for my security code from my card and now it just tells me to come here for support

    The "backup password" refers to a password you created when you elected to encrypt your iPhone's backup.  If you cannot remember the encryption password, you will not be able to access the backup.

Maybe you are looking for