How to find Service Pack for R3 System...
Hi
Its very easy to find Service Pack for BI system.
But once i try to do for R3 System , i find lot of software components like:
SAP_ABA
SAP_BASIS
PI_BASIS
ST-PI
SAP_BS_FND
SAP_BW
WEBCUIF
SAP_AP
SAP_HRCRU
SAP_HRCPT
SAP_HRCPH
SAP_HRCNZ
SAP_HRCNO
SAP_HRCNL
SAP_HRCMY
SAP_HRCMX
and many more... so i m confused which software component i should choose to find exact software component.
Thanks...
Hi,
Log onto your system. From any screen, select System > Status. In the block labelled "SAP system data", hit the magnfying glass. Although there are many objects that can be updated, the most critical is "SAP Basis". Under the column "level" you can see the highest rev you have installed.
Hope it helps.
Thanks and Regards,
MuraliManohar.
Similar Messages
-
Service packs for wls6.0
How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch?To only get patch or service packs, you should login to websupport.
(http://www.bea.com/support/web.shtml)
Only entitled customers are eligible to receive service packs. Or else you have to
download the whole
bungle which 60 + SP's.
Anne wrote:
How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch? -
Service pack for WebLogic 6.1
Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob NikomJacob,
If you need just the service pack for WLS 6.1 , you will need to have a
websupport login and password. Please refer to this url for more
information on this.
http://contact.bea.com/bea/www/BEACustRegLogin.jsp
http://websupport.bea.com/custsupp/
Hope this helps
Raj Alagumalai
[email protected] wrote:
http://commerce.beasys.com/downloads/weblogic_server.jsp
"jacob nikom" <[email protected]> wrote in message
news:3bb8c8c7$[email protected]..
Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob Nikom -
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0?
Hi,
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0? Please let me know.
Thanks,
MonicaHi,
In SRM for all objects like SC ( BUS21210),BID,PO(BUS22010),Confirmation (BUS2203),invoice etc all the data stored
in BBP_PDHGP and BBP_PDBEI tables only, These is no separate tables..
for your reference below are the few SRM tables
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSB Bid Invitation
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISB Bid Invitation/Bid-Specific Item Data
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_H Business Transaction
CRMD_ORDERADM_I Business Transaction Item
CRMD_PARTNER Partners
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
Thanks & Regards,
Prasad S -
Where do I find service packs and hotfixes for 6.5.1?
Anyone knows where to find service packs and hotfixes for 6.5.1? Only find new releases..
Getting this problem and they said something about hotfix 640
http://www.forumtopics.com/busobj/viewtopic.php?t=35362&postdays=0&postorder=asc&start=30
But it is impossible to find anything like that...
Thanks in advance!
/ Tomas BengtssonI have found it. So annoying finding the right site just 5 minutes after posting this
-
Service Pack for Proliant installing successfully but returning failure in OSD task sequence
Building bare metal servers with SCCM 2012 SP1 CU2 OSD and running into an issue with HPs where they attempt to install the Service Pack for Proliant 2013.02.0. I am using a package with a program. Here is the program command line:
Hpsum.exe /use_latest /allow_non_bundle_components /current_credential /silent
The application installs successfully but there is a distinct delay and then errors thrown that fails the TS. Setting 'continue on error' is a work around but not what I want to have in the production environment. How can I get around this issue?
This is the same exact package and program that ran perfectly fine in SCCM 2007, but we are seeing this as a new issue since the migration to SCCM 2012.
I'd like to solve this issue as well as get rid of the "Waiting for job status notification....InstallSoftware"
Any suggestions?
SMSTS.LOG
Invoking Execution Manager to install software InstallSoftware
12/3/2013 9:59:49 AM 1568 (0x0620)
Installing software for PackageID='WCD002D2' ProgramID='Silent install' AdvertID='WC120008' has started, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Waiting for installation job to complete.. InstallSoftware
12/3/2013 9:59:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:20 AM 1568 (0x0620)
Launching command shell. OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Windows station: WinSta0 OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
executing command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
executed command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:50 AM 1568 (0x0620)
CompleteExecution received InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
CompleteExecution processed InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
Received job completion notification from Execution Manager
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation completed with exit code 0x80070001
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation failed with error (0x80070001)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'=''
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
GetExecRequestMgrInterface successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Releasing job request, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Releasing of Job Request successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
CompleteJob successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
reference count 1 for the source D:\_SMSTaskSequence\Packages\WCD002D2 before releasing
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Released the resolved source D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
pInstall->Install(sPackageID, sProgramName), HRESULT=80070001 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Install Software failed, hr=0x80070001 InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Process completed with exit code 2147942401
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the action: HP Server Pack for ProLiant 2013.02.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
MP server http://MP_server.company.com. Ports 80,443. CRL=false.
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Setting authenticator TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set authenticator in transport TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Sending StatusMessage TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting message signatures. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting the authenticator. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
CLibSMSMessageWinHttpTransport::Send: URL: MP_server.company.com:80 CCM_POST /ccm_system/request
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Request was succesful. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionRetCode=-2147024895
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Clear local default environment TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Let the parent group (System Management Install) decides whether to continue execution
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
The execution of the group (System Management Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the last action: HP Server Pack for ProLiant 2013.02. Execution of task sequence failed.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)Hello Guys!
HP ProLiant Support Pack / Service Pack uses different Exit Codes, due to that this software support other operating systems than Windows. Therefore HP has standardized to use other Exit Codes, which Windows Detect as failures.
HPSum Exit Codes:
ExitCode 1 = "Installation Successful"
ExitCode 2 = "Installation Successful, but a reboot is required"
ExitCode 3 = "Installation was canceled, or no components were updated"
EcitCode 9009 = "Installation did not complete. Check the path and make sure that the Installation exists at the specified location"
HP recommends to use following Batch File to workaround this issue for SCCM:
=======================START_BatchFile=============================
:Init
@Echo Off
Cls
:Main
Echo HP Proliant Service Pack Setup
Echo Source : %~dp0
Echo ===============================================================================
Echo Installing the HP Proliant Service Pack Setup
Echo Command: "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
"%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
:CheckForErrors
Echo HP Proliant Service Pack Stauts:
If "%errorlevel%"=="0" (
Echo *******************************************************************************
Echo INSTALLATION FAILED!
Echo *******************************************************************************
exit 1
If "%errorlevel%"=="1" (
Echo Installation Successful!
exit 0
If "%errorlevel%"=="2" (
Echo Installation Successful, but a reboot is required.
exit 3010
If "%errorlevel%"=="3" (
Echo Installation was canceled, or no components were updated
exit 0
If "%errorlevel%"=="9009" (
Echo Installation did not complete. Check the path and make sure that the
Echo Installation exists at the specified location:
Echo Path: %~dp0
Exit 1
:End
Echo An unknown status code was returned from the PSP.
Echo This status code is [%errorlevel%]. This will be treated as a success,
Echo but please check the installation to make sure it completedly properly!
Exit 0
=======================STOP_BatchFile=============================
God Luck!
Best Regards Anders Horgen -
How to find the Version of CRM system
Hi All,
I have to install CRM system and I dont have any other information other than the EWA Report, Can any one let me know how to find the Version of CRM system and we dont have Java installed in it (Generally we check WEBCUIF but as we dont have Java I cannot see the Package). Can I go with the CRMUIF ?? .
I have Pasted the information of Support Package Maintenance, that is available in EWA Report.
BBPCRM
600
4
13
SAP BBPCRM Server
CRMUIF
600
4
17
SAPK-60004INCRMUIF
SAP CRM User Interface Framework
PI_BASIS
2005_1_700
16
26
SAP R/3 Basis Plug-In
SAP_ABA
700
16
29
SAP Application Basis
SAP_AP
700
13
29
SAP_BASIS
700
16
29
SAP Basis Component
SAP_BW
700
18
31
SAP Business Information Warehouse
ST-A/PI
01P_700
0
SAPKITAB7I
SAP Service Tools for Applications Plug-In
ST-PI
2008_1_700
6
8
SAP Solution Tools Plug-In
Please let me Know. Thanks in Advance.
VijayHi,
Logically your Status bar should show that.
Login to gui. --> system -> Status
and then you should see the crm version in your Component version.
SAP CRM ABAP 6.0
You should go with
BBPCRM
600
Thanks
Rishi abrol -
How to find out the password of system?
Dear all,
I would like to know how to find out the password of system as I forgot it?
Thanks a lot
Francis SZESince oracle passwords are encrypted so you cant see actual password. But you can use following procedure to login to oracle with system user.
For any account issue this statement.
select username,password from dba_users where username='SYSTEM';
EMDU27ANS729273
this will give you the password in encrypted format.
Now you can change that password for temporary purpose.
alter user system identified by test;
Now login and do your work.
After login you can issue this statement to reset the password to its original value.
Alter user system identified by values 'EMDU27ANS729273';
You have to enter the same encrypted password in the quoted string which you had found in 1st statement.
Cheers. -
Idoc Error: Could not find code page for receiving system
hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty -
Idoc failed in Bi system "Could not find code page for receiving system".
Dear Experts,
i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
All the idocs have been successfully posted except one which is giving this error
Idoc status 02 - could not find code page for receiver system.
Please guide me
thanks
vamsiHello Vamsi,
check Note 647495 - RFC for Unicode ./. non-Unicode Connections
If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
Please check this thread - IDoc error - Could not find code page for receiving system
Hope it helps,
Thanks & Regards,
Amit Barnawal -
Could not find code page for receiving system
Hi Experts,
When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
Dave
"Could not find code page for receiving system"Hi Praveen,
The detailed error msg says the following.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive. -
BW Monitor error Could not find code page for receiving system
Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
SrinivasThe log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. -
Service pack for BO enterprice XI 3.1
Dear Friends,
we are using evalution veriosn of BOE XI 3.1 with 90 days key. i installed BOE XI 3.1 now i want to
update it on highest level of Service Pack can you please tell me how can i obtain latest service pack for
BOE XI 3.1 while we are not customer of BO. We are customer of SAP but when i try to download BO SP.
Its give me error that you are not authorized.
Any help will be higlly Appricated.
Regards
MalikTry to open an OSS ticket about this and request access to the patches.
Regards,
Stratos -
How to fetch service order with partucular system status and user status
Hello All,
How to fetch service orders with specific system status and user status.
thanksI want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same..... -
Service Pack for WLS 5.1
Hi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
RegardsHi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
Regards
Maybe you are looking for
-
Is it possible to upgrade the hard drive of my MacBook Pro Mid 2009?
I have a mid 09 MacBook Pro that has 250GB of hard drive space, and I was looking to upgrade it to something around 750GB to maybe even 1 terabyte. I've looked around and I'm afraid of getting the wrong model for my laptop, so is there any place or t
-
I made a new Apple ID and I want to delete my iCloud account on my iPhone, will it delete only documents or data or it will reset my whole iPhone, like deleting my apps, contacts. Please I need your help.
-
Error while installing the Android 4.4 KitKat update - How do I fix it?
Hello, I'm having a problem in which my phone will not install the android 4.4 update on my droid mini successfully. My phone has downloaded it over Wi-Fi and 4G LTE but the installation itself never actually works. After the first reboot during my i
-
I need to take a HD out of my PC and put into a external case for use with my macbook. I hear that you can read it but not write to it on a Mac? What do I need to do to use it?
-
Script to create user OUTLN in 9i
Hi, Note 240478.1 "Script to create user OUTLN in 9i" This script create OUTLN user. And then should we : " issue grants, create tables and indexes." The qustion is : should we issue grants, create tables and indexes after executing the script ? Then