How to find SiteCollections set to "NO Access" in a farm
Hi Friends,
I need to list out all siteCollections which are set to "No Access" in "SIte Collection Quotas and Locks". Is there any database query to list out the "NO Access" sites ,so that I can query against the content Database to get the same?
I am also not able to find which table in the content database contains this Value.
It would be really great if any of you can help me.
Thanks,
yesh
Hi Yesh,
Do you know if there is an API to set the "No Access" flag?
Thanks,
Didier G
Similar Messages
-
How to find out the query is accessing the DB tables or not
Hi Gurus ,
How to find out the query is accessing the DB tables or not.
Where exactly we will find this information in SAP BW.
I know that this information we can find in ST03. But where exactly we will find the query information along with DB information?Lakshmi
Activate BI Technical Content for Query analysis and run query against that.
Hope this helps
Thanks
sat -
HT4262 How do I re-set my network access password?
How do I re-set my network password?
You simply set it via the airport utility.
https://discussions.apple.com/message/21138326#21138326
If you have forgotten the password, reset the Airport by doing a short press of the reset button.. this is called soft reset.. all passwords are set to factory for 5min so you can change them till your hearts content.. then upgrade the airport. -
How to find Collation setting for Analysis services in Sql server 2000
Hi
Can some please guide me how do I check Collation setting for Analysis services in Sql server 2000
i need it to install Analysis servcies on my machineHi SMV123,
We can find the collation settings for Analysis services in SQL Server Management Studio (SSMS). Connect to the SSAS instance from within SSMS->Right click on the instance and select Properties->An Analysis Server properties page will appear. And then
on the left hand side is a Language /collation option.
Besides, here is a link about how to install SQL Server Analysis Services 2000 for your reference.
How to Install SQL Server 2000 Analysis Servicese
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support -
How to find out if someone has accessed my iclouds
how can i find out if some one other than (me) the owner and only authorized person has accessed my icouds account with out my authority. is there maybe a link that notes the time and date and maybe which device, hadd accessed the account? if theres not one then apples needs to seriously get on top of this cause i see that its not just me thats having this isue i think that a link as such wouls solve and ease so much stress and nervouseness from people,
thanksI know what a screenshot is
So why mention it in connection with accessing your phone remotely then?
I've been using mac computers for over 30yrs.
So? You're asking about remotely accessing your phone, aren't you?
I know what I saw, it looked like a 'terminal view' of remote access activity
Well, you obviously don't know what you saw, otherwise you'd be able to find it again.. but considering iOS does not contain such a view of activity, and never has, it's hardly surprising you can't find it.
The only place where anything is logged in iOS is in Settings > General > About > Diagnostics & Usage > Diagnostics & Usage Data - but those are not remote access logs.
By the way, your comments are very rude and condescending.
LOL. Hardly - I've given you facts of the situation. Nobody can access your phone remotely, and no list of remote activity exists in iOS. If you can't accept facts then you've come to the wrong place.
But believe what you want. Doesn't bother me. I've given up trying to help you. -
How to find which form function is accessed by user recently.
Hi Experts,
I have to find out which form function is accessed by user recently, we can find out what was the last form user accessed using FND_LOGIN_RESP_FORMS table.
thanks,
ChukkyHi,
I have no idea about any differences in this table between 11i (11.5.10.2) and R12.
If you can give me some information that how ICX_SESSIONS and ICX_TRANSACTIONS table gets populated.I do not think you will find details about these two tables as Oracle does not support access to Oracle applications data using this object, except from standard Oracle Applications programs (check eTRM).
Log a SR, and see if Oracle Support would provide you with more details.
Regards,
Hussein -
How to find if a user has access to view "all_directories" ??
A developer has complained that he cannot access view all_directories which he was able to access few days ago in production.However in development instance , he is able to query from the view all_directories.
How to compare the two access for the same schem ain two different instance ??Vicky wrote:
Ask them to provide proof (screen copy-paste or whatever) indicating the failure.Yeah , you were right, they were able to query the table, but not returning any rows. ( they flabbergasted me...). They are telling me that earlier they were able to query and get output, but they are not getting any row now ....just no rows selelctedThat makes more sense - all accessible directories for the user removed by the administrators. -
How to find the responsibility given share access to a workbook?
I've got this code to find the users who workbooks have been shared with. How do I find the responsibilities that workbooks have been shared with?
select docs.doc_name,
fnd.user_name,
priv.ap_eu_id,
decode(usr.eu_role_flag,0,'user',1,'role') user_role
from eul_us.eul5_documents docs,
eul_us.eul5_access_privs priv,
eul_us.eul5_eul_users usr,
applsys.fnd_user fnd
where docs.doc_id = priv.gd_doc_id(+)
and priv.ap_eu_id = usr.eu_id(+)
and usr.eu_username = '#'||fnd.user_id(+)
and priv.ap_type = 'GD'
and docs.doc_name = :my_doc -TracyHi,
You could probably use code like this:
select docs.doc_name,
fnd.responsibility_name,
priv.ap_eu_id,
decode(usr.eu_role_flag,0,'user',1,'role') user_role
from eul_us.eul5_documents docs,
eul_us.eul5_access_privs priv,
eul_us.eul5_eul_users usr,
applsys.fnd_responsibility_vl fnd
where docs.doc_id = priv.gd_doc_id(+)
and priv.ap_eu_id = usr.eu_id(+)
and usr.eu_username = '#'||fnd.application_id(+)||'#'||fnd.responsibility_id(+)
and priv.ap_type = 'GD'
and docs.doc_name = :my_doc Rod West -
I am using a 5 year old MacBook Pro and Firefox version 7.0.1(2).dmg.
This is the 2nd time I have asked this question. I just added the Firefox version 7.0.1(2).dmg.Go to the Help menu, select Excel Help. Search for cell formatting to find the help information.
Please, for further reference, Excel and Office are Microsoft products, so if you need help with them you should go to the Microsoft help forums - start at www.mactopia.com. These forums are for Apple products. Also, when you do post a question you should pick the most relevant forum in which to post. This question you posted in the iMac (PPC) forum. Clearly, you have an Intel Mac. -
Download this video tab : how to find and set it?
On the last two MozillaFirefox editions I have not found the "download this video" tab in the menu bar or elsewhere. So I completely failed to download certain things. I just want this most important tab called "download this video tab" back.
See in https://support.mozilla.org/en-US/questions/786035 specialy '''oernii''' replies (the creator of the add-on)
[https://addons.mozilla.org/en-US/mobile/addon/cert-manager/ Cert Manager add-on ]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
How to set up full access and limited access wireless networks to laptops
Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.The basic method for remote access is not changed.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
You have a few issues.
The really big one.. the school firewall should not let you connect to home.
Check the IT admin at your school but if they allow anything but a few protocols like http and https through, they are not doing their job. You cannot afford in a large network to have every Tom Dick and Harry access any open device.. that can introduce viruses and trojans into the network behind the firewall.
The general method for remote access on large networks is vpn and the TC offers no vpn connection.. just AFP.
If you intend using 3G wireless stick or the like then you can get access.
The next issue is static public IP or how to find the TC.. you need some way to find the IP if your ISP does not offer static ip, and the tc has no dyndns client. Since Apple shut down new users for mobileme and will close that service there is no method to find the TC IP without owning your own domain. You would be better placing the TC in bridge behind a router that does offer dyndns and port forward AFP (TCP 548) to it. -
How to set owner-only access file permissions both on Linux and Windows
Hi everybody.
I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
Thank you in advance.More ideas just came back to me (of something I did before)
Each OS requires a different control.
For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
Then you have to write some native code (access via JNI) to access/modify your authorization.
A more professional solution that I used was J-Integra (other similar tool exist).
Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
In my case it was to read/write/modify Winword documents transfered between PC and server.
From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
Here I must confess my ignorance on Microsoft.
Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup). -
How to transfer a set of data from Excel spread sheet to an Access database
hi,
Can any one please tell me how to transfer a set of data from Excel spread sheet to an Access database using SQL query.I'm using java API currently. I have done all sorts of ODBC connection in administrative tools.The file is in correct location. I have done certain coding but with errors.Help me to get rid of these errors,
Coding:*
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection datacon=DriverManager.getConnection("jdbc:odbc:exdata","",""); *//For Excel driver*
Connection datacon1=DriverManager.getConnection("jdbc:odbc:stock1","",""); *// For mdb driver*
Statement datast=datacon.createStatement();
Statement datast1=datacon1.createStatement();
ResultSet excelrs=datast.executeQuery("select item_code,sdata,closing_stock from phy "); *//phy is the excel file*
while(excelrs.next())
String ic=excelrs.getString("item_code");
System.out.println(ic);
String d=excelrs.getString("sdate");
double cs=excelrs.getDouble("closing_stock");
int dbrs=datast1.executeUpdate("insert into second values('"+ic+"','"+d+"',"+cs+")"); *//second is the mdb*
excelrs.close();
}catch(Exception e)
System.out.println(e);
Error:*
java.sql.SQLException: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'C:\JavaGreen\phy.xls'. Make sure the object exists and that you spell its name and the path name correctly.
thanks,
kumar.JAVA_GREEN wrote:
No i haven't mixed up.But the file from where i have to retrieve the data is in csv format.Even though i created another csv driver.and tried but i cud not find a solution to load/transfer a set of records from one file(in Excel/csv format) to another file(in mdb format).plz help me.Is there any other methods for this data transfer.A csv file is NOT an excel file.
The fact that Excel can import a csv file doesn't make it an excel file.
If you have a csv file then you must use a csv driver or just use other code (not jdbc) to access it. There is, normally, a ODBC (nothing to do with java) text driver that can do that. -
How to find out list of users who have access to particulat SID
HI
How to find out the list of users who has access, to a particular SID?
Satish.jurjen,
Thanks for replying, actually i was trying to navigate and execute the report using, SUIM...
could you help me to find out the list of users who has access to a particular system.. using SUIM.
satish. -
NEED info on How to Set Router to access just one website???
Ok here we go again, Finally found out it's my Linksys not letting me onto one website..I had a 310N and thought that was the problem so went out and bought a 610N ..same darn thing just won't let me access one website I need to sell my goods for income. I remove linksys from my modem and plug it directly into one of my computers and I got the website..Yes it's a Linksys problem !!!
I need some info on how to set up a access point in my router's setting to let me log on to this website www.denofangels or http://74.86.166.210/
Is it time for me to call the support team??????????????
I'm running XP on my computers, have 3 of the 4 computers using wirelessN adapters and on the main computer is the WRT 610
Help Please ....linksysDoll
Gone Nutz trying to figure out Linksys again!!MY Internet provider is Time Warner / Roadrunner cable..Does this help you to solve my problem. Nothing wrong with the modem..just my wrt 610N settings, I'm guessing it carried over from my wrt 310N..this was working fine until a couple of months ago and then nothing for this one website.
I'm running XP
Thank you in advance for any help or info
Gone Nutz trying to figure out Linksys again!!
Maybe you are looking for
-
How can I increase the character limit of my text messages for Droid Maxx 4.4?
How can I increase the character limit of my text messages for Droid Maxx 4.4?
-
Split signal into XY components
Hi, I am new to LabVIEW but have spend a huge amount of time (mainly going round in circles not getting anywhere) trying to get my VI design working. All very frustrating since I know what I want the VI to do but cannot figure out how to implement i
-
Flash CS4 will NOT open or will stall before preview
When I try to open Flash, the splash screen appears and then stops. If I try several time, it may open and then most likely not at the very beginning, but at the point where I browse for the .flv file. If i get it open, usually at the point where I b
-
Hiding some topics from Search mechanism
Hi, I have some html pages, which i have used as popup in some topics. But i want to hide these html pages from the Search mechanism. I tried changing the html ext to xhtml and importing it as baggage file (i came across this sometime back when i was
-
This is the first time I hooked up my camcorder since the upgrade. iMovies shows my videocan with an excalamation mark inside a yellow diamond and bogs down completely. What is wrong? I have iLife 2011. Is there a setting that I missed?