How to find suitable ram for my hp pro cpu

Hi,
I am using HP Pro cpu with Intel Pentium E5400/2.7 GHz.
The motherboard here is from Micro Star Intenational Co Ltd of model 0B58h.
Currently, available ram is 1gb, but i have another unfilled slot.
The ram details known using CPU-ID software is as follows,
SlotDR3
Module Size:1024 Mb
Max BandwidthC3-10700(667 MHz)
Manufactureramsung
Part Number:M378B2873EH1-CH9
I want to increase my RAM, therefore I want to know what is the maximum RAM capacity I can go for and
which RAM specfications is compatible for my CPU
Kindly assist me in this.
Thanks and Regards
Krish

Hi,
There are few ways but quick and easy: please use the following site to scan your machine. It will tell you exactly what you need and where to buy or you can also use the information to buy elsewhere:
http://www.crucial.com/usa/en/systemscanner
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to find suitable( existing) function group for a Function Module ?

How to find suitable( existing) function group for a Function Module to be created?
This is FM for converting amounts to text.

Hi,
If you are not sure into which Function group your FM should go in then its advised to create a Function group of your own. Its not advised to create a function module in any other function group unless its owned by you since your FM can get deleted by others or it can get changed.
Create your own Function group. But if you want to create in an existing FG then best way is to find out the Function Group by searching for suitable existing Function module then see their function group
Regards,
Sesh

[SOLVED] internal error Cannot find suitable emulator for x86_64

Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)

HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya

How to find right charger for my HP Pavilion 15-r004ne ?

how to find right charger for my HP Pavilion 15-r004ne ?my charger got mixed with my friend's and both looks almost same and i was unable to find the right charger.i tried hp partsurfer and unable to find my product.looking for suitable solution

This is how the AC adapter is described in the parts list: 45-W non-PFC, non-slim HP Smart AC adapter (for use in all countries and regions except for the People’s Republic of China and India) 741427-001 So look for a 45 w adapter (volts times amps is watts) withthat part number and that should be yours.

How to find serial Number for BCC Plugin?

Hi,
How to find serial number for Bcc plugin on FCP?
I need format my Mac so before that I to find the serial number?
Please anyone can help me....

The serial number has the format like E-111-aaa-222-bbb-333-ccc-444-ddd-5ee-ffff, it can be found on a piece of paper which has 3 stickers with it inside the box.

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

How to find the patches for perticular concurrent program

HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank's

Query the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

How to find MATCH count for # in a String

Hi all,
How to find MATCH count for # in a String.
Ex: 6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20
Regards,
Balavardhan.K

>
balavardhan k wrote:
> I have used below syntax to find count but it is not returning the value and SY-SUBRC = 4.
>
>
> Data : l_text type string.
>
> l_text = '6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20'.
>
>
> FIND ALL OCCURRENCES OF '#' IN L_TEXT MATCH COUNT mcnt .
Then it's not a # but possible a horizontal tab-sign.
Do a find on cl_abap_char_utilities=>horizontal_tab instead.
Edited by: Maen Anachronos on Nov 23, 2010 2:48 PM

How to find system status for production orders?

How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guide

Hi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva

How to find condition type for a particular material document no.

hiiiiii
How to find condition type for a particular material document no.

Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
<b>Reward points for useful Answers</b>
Regards
Anji

How to find condition type for a material???

How to find condition type for a material??

Hi Suman.
Refer the following
tcodes:http://www.tcodesearch.com/sap-tables/search?q=condition+types
and http://wiki.scn.sap.com/wiki/display/Snippets/Get?original_fqdn=wiki.sdn.sap.com
Please search for condition type with pricing condition/pricing procedure.
Regards,
Kannan

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello there, g0ddess.
The following link proves to be a great resource to get started with Apple Training and Certification:
Training and Certification
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to find suitable ram for my hp pro cpu

Similar Messages

Maybe you are looking for