How to find system details

Hi Folks
I am new to VC . I am trying to configure "define web service system" in portal. System ask me to fullfill following information .
1) System ID
2) System name
3) System ID prefix.
I dont know how to find these details. Can some one help me with step by step guide on this one?
Thanks a lot
AG

Hi,
Check out this link
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/5f/63c5e4ae6042ee804464f5888b0870/content.htm">System details</a>
<b>WSDL URL portal system</b>
A portal system (PCD semantic object) which represents a web service by its WSDL URL
A portal system is created via system administrator role in the portal (New system wizard)
<b>Logical Destination</b>
A definition on the WebAS which represents a web service by one of the following:
<b>WSDL URL</b> (e.g. http://www.xmethods.net/sd/2001/CurrencyExchangeService.wsdl)
WSIL URL (rarely used)
SAP back-end
A logical destination is created via J2EE Visual Admin (NW04s) or http://<server>:<port>/nwa (NY/CE)
Hope it'll help
Regards
MaliniV

Similar Messages

  • How to find system status for production orders?

    How to find system status for production orders?
    looked into table AUFK, AFKO and AFVC but none of these tables, carry
    system status as part of the fields(STTXT)
    I tried to filter in COOIS, but not much help
    Able to find system status information in COHV,Is there any other way where
    I can find system status information for production orders
    Kindly guide

    Hi,
    Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
    But, it is very difficult to combine the details like Order and System status.
    Take the help of your ABAPer to generate Report for you.
    Regards,
    Siva

  • How to find CIN Details

    Hi all...,
    How to find CIN Details in current SAP System.  Like...
    CIN     22B               
    CIN     30A               
    CIN     40A

    Hi,
    Go to Transaction 'J1ILN' and you will get the pure CIN related Menu.
    and search for your related topic in CIN.
    All the CIN related TCodes startwith J*...
    Regards,
    Anji

  • How to find hardware details of IPVC-3515-MCU12

    Please help me with how to find hardware details of IPVC-3515-MCU12 & also for Cisco Unified MeetingPlace Express

    Hi Vijay,
    you can login into IPVC. Under Device---Basics, u can get Serial number, Hardware and Software version.
    regds,
    aman

  • How to find gr details and invoice status for particular list of purchase

    Hi,
       how to find gr details and invoice status for particular list of purchase orders.
    is there any t.code/report for it??

    Hi,
    You use t.code:ME2Nand enter PO number,tn Execute.Now you will have PO details .Now in item details get GR details and Invoice details   in  purchase order history TAB.
    In t.code:MIR5, you can see blocked invoice by selection.
    Regards,
    Biju K

  • How to find system MAC id  or physical address

    hi,
    anybody know
    How to find system MAC id  or physical address in flash?
    Thanks in advance
    ayathas

    no way to ffind this
    Have you tried with  AUT10  ??
    thanks
    G. Lakshmipathi

  • Client check failed - how to find the details

    system: sccm 2012 r2.
    Noticed there are quite a number of clients in the status/result as: client check failed
    where and how can I find the details as why/what causes the failure?
    Thanks in advance

    Hi,
    On the clients you can review the CCMEVAL.log file, you can also check out the two reports "Client remediation summary" and "Client remediation details"
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • How to find the details of the BPC process running in SM37 and SM50

    We had BPC performance issues and noticed that there are some process or batch jobs that are kicked from BPC that runs longer and kind of hanging.  SM37 and SM50 provides some information like job name, how long it is running.  Job name is kind of cryptic and the user name is always BPC_SYSADMIN and not able to get any additional information.  Is there a way to find more details about the job/process that is running  (whether it is a input template and which input template, whether it is a DM package and which package, whether it a report/EVDRE and which one etc.  Plus the BPC user name)?
    Couple of times, the user received the error message u201CSystem error: -2146697205u201D after it ran for a while.

    You can distinguish between reports and DM Packages easily: reports/IS run in DIA process while DM packages in BGD.
    To find out which BGD process corresponds to which DM Package take note of the time that package started (Local time). Than go to SM37 with user ID BPC* and find a job that started at same time (Server time).
    Looking into job details you can find on what Application server it's running and PID - this uniqely identifies BGD process in SM50.
    Hope this helps.
    Gersh

  • How to find the details of the user who  accessd documents in dms portal

    Hi Experts,
      I require the details of the  all  users who accessed the documents and how many time they accessed in DMS.
      how to find this could you all  please help me in this...
      waiitng for your responses..
    Thanks & Regards,
    Shilpa.

    Hello,
    If they change then it can be found in DMS log but accessing DMS will not capture. My opinion is tweaking around User Log to extract the related information
    Thanks
    Jayakumar

  • How to find System information Of Enterprise Portal from OS/DB level

    HI All.
    How to find the system information of Enterprise Portal  from OS/DB level. like system name, version, stack.
    ITS VERY URGENT
    Thanks in Advance.
    Mahesh

    Hi Mahesh,
    here is where you can find the system information about your EP installation (i.e. O/S, DB, components release, etc):
    1- Goto the Web AS Java URL (http://<host>:<port>)
    2- Select "System Information" and log in as an administrator user
    3- After logging in, the system information page displays the O/S, DB, application server level
    4- Select "Software Components", select the link "all components" (upper right corner of the table) and then you should be able to see the version of your components/applications
    Hope this answers your question.
    Regards,
    Joseph

  • How to find system is in Unicode ?

    Hi,
    I need to find system is in unicode PROGRAMATICALY?
    a®

    You saved my day.
    I am planning to write a wrapper RFC in the target system to check using your previous fm.
    Thanks once again Mike.
    a®

  • How to Find Supplier Details

    How to Select *(Supplier Name , Supplier Number ,Tax Registration Num , Taxpayer ID , Alternate Supplier Name , SIC , Address Line 1 , City , State )* To a specific Supplier.
    I used ap_suppliers but I did not distinguish the corresponding columns to the needed feilds.
    And please I need a systematic way to find out the base tables to a self services EBS Applications. Just like Suppliers enquiry and entry windows.
    Thanks in Advance
    Edited by: Oracle on Jun 6, 2011 3:23 PM

    Assuming that you want to see the query which lies behind the self service form.
    First ensure personalisations are enabled.
    Navigate to the form in question and query back a suitable supplier.
    In the bottom left hand corner of the form there is a link 'About this Form' (If the link isn't there then personalisations are not switched on, so you'll need to go back to the first step and resolve that) - click on the link.
    Scroll down to the section 'Business Component Reference Detail' - expand that by clicking on the '+'.
    In the 'View Objects' section there should be a link 'oracle.apps.pos.supplier.server.VendorsVO' - click on that link and you will see the query which populated that section of the form. From that you should be able to figure out exactly which table and/or view provides the data and which column the data comes from. You may need to work through other links in that section to get everything you need.

  • How to find user details o who are using bw reports

    Hi BW Experts,
    I want to know the details of users who are using bw reports.Your help is greatly appreciated.
    Thanks & Regards
    Pakki

    Hi,
        You can see it BW statistical reports. Once check 0BWTC* (3.5)  or 0TCT* (7.0) cubes are availble in your system or not ?
    Please check these links.
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5401ab90-0201-0010-b394-99ffdb15235b
    Or else you can only get this information if the query/ workbook is enabled for statistics logging in transaction RSDDSTAT.
    If it is enabled you can goto table RSDDSTAT ( 3.5) or RSDDSTAT_OLAP( 7.0 ) to see the users who executed the query . These tables store all the information per query session and you will find more than one rows per session but you can find the information you want i.e. users executing a particular query.
    Also Tcode: SU01 will give you all the user lists in the server.
    Regards
    Pcrao.

  • How to Find System Variables

    Hi All
    I need to Find the Hidden Variable i.e., System Variable in a Document like A/R Invoice,A/P Invoice etc
    how can we know the variable no.
    Thanks in Advance

    Hi madhu,
    Usually, the variable number is the only thing you do know. You can go about in two way to find out to what field it relates to
    1. Use the System Variables .xls file to know the field description(not the name). Then open PLD, in a report that uses the same table, and browse through the fields until you find a field with the same description. That field list also indicates the field´s name.
    2. Query the table in question and browse through the columns till you find the desired field.
    If there is a more direct way, I also would like to find out.
    Regards,
    Vítor Vieira

  • How to find system folder in Mavericks?

    How do I access system folder in Mavericks?

    Now I understand your question.  Have a look at this thread and follow the steps given by gordonol and elgrego...
    https://discussions.apple.com/message/23567732#23567732
    1. There seems to be a simple solution within Finder. Remove both:
    /System/Library/Frameworks/GameKit.framework/Versions/A/Resources/gamed
    and
    /System/Library/Launch Agents/com.apple.gamed.plist
    or
    2. Open the Terminal app located in the Utilities Folder. Then copy/paste and run these commands, one at a time:
    defaults write com.apple.gamed Disabled -bool true
    then
    sudo launchctl stop com.apple.gamed
    I hope that solves your problem, but now see how bad it is and why you want to access the System Folder too!
    Just click on "MacIntosh HD" in the sidebar of Finder. Then navigate to the folder given in the link.

Maybe you are looking for

  • My iPod Touch is stuck in DFU Mode

    Hi, My Third Generation iPod Touch is stuck in DFU Mode (Completely Black Screen) and I cannot exit it as I have a broken Sleep/Wake button on the iPod. Even worse, iTunes will not see the device so I can restore it. The only thing that I can think o

  • K3b wont let me drag and drop files or folders

    I use k3b and since switching to arch havent had to use it till now. I open it just fine but it wont let me  drag and drop from dolphin (files or folders) though I can manually browse using its interface at the top and add files just fine... anyone e

  • Form Adobe Forms for Appraisal

    Dear Experts. How can modify the form showed in the appraisal document in the porta MSS? Where is generate? What is the module function that genere this form? This form is generated automatically and is showed in the portal. Thanks in advance. Regard

  • Java home in mac OSX

    i have installed java 1.4.2 in Mac and set the path to a location. like export JAVA_HOME={some path} in the .bashrc file But when ever i run the following command from the terminal $which java it shows the default java path instead of one put in .bas

  • Rebate agreements / Rebate condition type

    Hi Experts, Can anyone tell me how to process Rebate agreements/Rebate condition types in pricing procedure.Please help me by giving step to step description for rebate condition type and where to maintain condition records and how they function. Tha