How to find T-codes from which roles

Hi
Can any body tell me how can I find from which all role a user getting access to a Transaction code.
For example : I want to remove a access of a particular Transaction for User XYZ. For this I want to find out from which all roles assigned to him , he is getting access to that Transaction
Thanks in advance

Hi there,
this is how I would do it. Forget the lookups etc, though maybe this would be useful for later analysis. Instead, run a report with complex selection criteria
SUIM->Roles-> Roles by complex selection criteria
(transaction S_BCE_68001425)
Enter in role name
Enter in User ID (in selection according to user assignments)
Enter in transaction code, if the transaction is in the role menus
OR
Enter in S_TCODE under selection according to authorization values, then click 'entry values' then enter the transaction under transaction code.
Execute and voila.
Hope this gives you want you need.
Cheers,
Di

Similar Messages

How to find Transaction code from Report/program name ?

Dear all,
How to find Transaction code if i know Report/program name ?

Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi

How to find T.Code in user Role

Dear Experts,
How to check transaction code maintained for user Role.
For Example I have one User X who have Authorization of T. Code J1ID
is it possible to find out T. Code J1ID is maintained in which role, User have No of Roles in his ID I dont want to search it by open each and every Role. is there any short way to search T. Code.
Thanks,
JA

Hi Javeed,
There are many ways to do it.
Go to SUIM>> Roles> Complex Selection Criteria>
Enter the User ID: USERX
In the Objects enter: S_TCODE (Press Enter)
Enter the Tcode as the field value of this object.
Then click on execute, you will get the list of roles assigned to this userX having above mentioned Tcode. Let me know if you need any more information on this.

How to Find out the from which table we can get the following fields?

The following fields are from invoice data
How to know or from which table we get the following fields:
Header Details:
Manifest:, Finance Control #:, Alternate SID:, Carrier:, Container/Trailer #:, Hazmat Code:, Harmonizing Code, Freight Forwarder, Fiscal Rep., Ship From, Notify Party
Item Details:
VAT/Tax Rate %, VAT/Tax Amount, Measurements, Net Weight, Gross Weight
thanks

Dear Krishnama
Place your mouse on the required fields and press F1. A box with header Performance Assistant will appear in front of you where you select "Technical information" (icon like hammer and spanner).
You can now see what table it is.
thanks
G. Lakshmipathi

How to find JOB code from job title

Hi Experts,
Could you please let me know the procedure to get the JOB Code from JOB titles.
Regards,
Sairam.

Hi Sairam,
Please make use of "Search Term" field in report S_AHR_61016497 - Existing Jobs
Regards,
Dilek

How to find the Table from which a Custom table is created.

Hi Gurus,
I have a custom table in SAP and want to figure how that has been created. How can I do that?
Regards
Prashant

Hello Prashant,
what do you mean by "how"?
When you say custom table do you mean "Customization table" or a "Customer table" (in namespace Z... or Y...)
Anyway, you can access SE11 transaction, view the table and then check its attributes.

How to find following data, from which tables

Hi all,
I want to display following fields in alv:
total stock of a werks KG
total stock of a werks EUR
company total rated stock KG
company total rated stock EUR
MG blocked stock KG
MG blocked stock EUR
Purchase orders whose confirmation type is FG KG
Purchase orders whose confirmation type is FG EUR
All purchase orders whether it has confirmation type or does not have KG
All purchase orders whether it has confirmation type or does not have EUR
Thanks.
deniz.

hi,
check these standard transactions.
they may provide the data u required.
EW82 MM Stock Value List
AMRP Send Stock/Requirements List
LS26 Warehouse stocks per material
LX02 Stock list
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5L List of Stock Values: BalancesMB5W List of Stock Values
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC50 INVCO: Analysis of Dead Stock
MMBE Stock Overview
OMBX Stock Balance Display
OPPI Available Stock

Remove transaction codes from multiple roles at a time

Hello,
how to remove transaction codes from multiple roles at at time?
Thank you in Advance.

Hi Vanita,
Why do you want to remove a t-code from all the roles. Are you no longer going to use the t-code. If this is the case then you can lock the transaction code in T-code SM01 so that no one can use it. But this would effect other users as well, it should only be locked if no one should use the particular T-code.
Another alternative is to write a program to remove the particular T-Code from the table AGR_TCODES where the relation ship between the role and t-code is stored.
Thanks.

Delete transaction codes from a role

Hi,
I want to delete 20 percent of the transaction codes from a role and I have to carry out this exercise for 20 to 30 roles, please let me know how to go about it.
I know that I can go to the each role and delete each transaction by transaction but this process appears to be very tedious and time consuming, kindly let me know if there is any other alternative for this.
Please help.
Thanks
Suresh

Hello Suresh,
First create single column internal table, for example ROLES which will hold all the ROLES for which you want to delete transaction codes. Read all the required ROLES into ROLES table.
Now, You can create internal table, for example ITAB1 for ROLES and TRANSACTION CODES and read required roles and transactikon code from AGR_TCODES table.
Now loop at ROLES.
Move all the records from ITAB1 to ITAB2 where AGR_NAME = ROLES. --> as ROLES is single column table.
     DESCRIBE TABLE ITAB2 LINES <count>.
    Now find 20 % of the total <count>.
    Now use delete table with from 1 to <result after %age>
..... Go for next ROLE.
endloop.
For example:
If total transaction cod efor particular ROLE are 10 then
20% of 10 will be 2 transaciton codes.
so you can delete table <table> name from 1 to 2.
Hope this helps.
Thanks,
Augustin.

How to Know Transaction Code from whcih the Document is Created?

Hi,
How to know which T Code is used to create documents. For few documents say material document (MBLNR), I can find the T code from MKPF table from which it is created as T Code field is available.
If the table doesn't contain a T Code field, then how to find the T Code from which document is created?
Regards,
Hari.

CDHDR, if change documents are written. DBTABLOG, if table logging is active.
Otherwise...some knowledge of the SAP application components required.
Thomas

How to find max(time) from table using group by

how to find max(time) from table using group by
select var max(time)
          from table
          into (var1, time1)
           where .....
             group by var.
it is fetching record which is top in table.
if u can help?
regards.

No this will fetch the maximum time from teh table.
select var max(time)
from table xxxx
into (var1, time1)
where .....
group by var.
Refer this code
TABLES SBOOK.
DATA: COUNT TYPE I, SUM TYPE P DECIMALS 2, AVG TYPE F.
DATA: CONNID LIKE SBOOK-CONNID.
SELECT CONNID COUNT( * ) SUM( LUGGWEIGHT ) AVG( LUGGWEIGHT )
       INTO (CONNID, COUNT, SUM, AVG)
       FROM SBOOK
       WHERE
         CARRID   = 'LH '      AND
         FLDATE   = '19950228'
       GROUP BY CONNID.
WRITE: / CONNID, COUNT, SUM, AVG.
ENDSELECT.

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to find acount code in R12

Hi,
How to find account code details in R12? Which table contains account code details?
Thanks

Thanks Sanjay, I would like to know account code and their name and active status also. do you think there is another table also.

How to find bar codes and mails to send clients in smartforms

HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.

Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá

How to find a autorization object and roles for paricuu00F6llar documetytpe(DMS

Hello,
I have a question,Its urgent ..#
For a particular document type (for example PPN)..
How to find a authorization object and roles...Please let me know.
In the DIS which autority object and roles they use it for this.
<b><REMOVED BY MODERATOR></b>
Regards
preethi
Message was edited by:
Alvaro Tejada Galindo

This issue seems to be resolved since jDeveloper/ADF 11.1.1.3.
Am I true?

How to find T-codes from which roles

Similar Messages

Maybe you are looking for