How to find that how many mailboxes are stored in each database
Hi every one.
Good evening
My question is, i have two databases in exchange 2010 server and i have around 150 mailboxes in both databases.
mdb01 & mdb02. I need to now how many mailboxes are stored in each database like
pls see example.. this is just a example..i dont no how many are stored in each datbase :-(
mdb01----20 mailbox
mdb02----130 mailboxes
and also i would like to know about the below details also
available mailboxsize in each database----DBsize---DB white space--
Thanks for your kind help
Karan
To see how many mailboxes you have in each database, run:
Get-Mailbox -Server <ServerName> | group database | ft Name,count -AutoSize
...and to get a hunch of how much free space you have available, run
Get-MailboxDatabase -Server <ServerName> -Status| ft Name,databasesize,available* -AutoSize
...but to get the exact amount of free space, you need to dismount the database and run
eseutil /ms
See:
How To Check Database White Space In Exchange
Martina Miskovic
Similar Messages
-
How can we find out how many programs are stored in a percticular package
Hi,
I need to find out how many programs are stored in aperticular package.
For example we are having one package in our project. I need to give all saved programs details into this project. How can we find this.
Thanks in advance.Hi,
From TADIR table we can find out.
Regards,
Jyothi CH. -
How can i find how many sessions are opened in my database
Hai
Iam using Oracle 10g version, front end that iam using is oracle forms6i, sometimes my system get hanged because of some session and not closed i think, can i know how can i find how many session is opened on my database.You could query the V$SESSION dynamic view. More info...here...
HTH! -
How many profiles are there for each camera?
When I develop my Nikon D700 raw files I have a choice of a number of profiles such as Adobe Standard, Camera Vivid, Camera Neutral Camera Portrait and various DX2 modes.
However with raw files from my Olympus E-P1 I can see only one profile;- Adobe Standard.
None of the E-P1 modes such as Vivid, Muted, Natural or Monotone appear to be emulated by Adobe.
Is this correct and how can I find out which profiles Adobe has actually produced for each camera?
IanYes, Dorin is correct. For the E-P1 there is a single profile named Adobe Standard. You can build additional profiles using the DNG Profile Editor tool:
http://labs.adobe.com/wiki/index.php/DNG_Profiles
http://labs.adobe.com/wiki/index.php/DNG_Profiles:Editor
As I recall, a forum user was also building profiles and offering them for free. I think the E-P1 was included in the list.
Eric -
How many messages are in an archive file?
Hi,
Is there a way to tell how many messages are written to each archive file? It looks like the default file size is 200M.
Your help will be greatly appreciated.
Regards,
RickHey
If you really want,you can cancel this job in sm37.
But i would say that you can let it run. as long as it does not affects the performance of PI system you should be ok.
a better approach would have been to increase the retention period in sxmb_adm,then go to SE38 and execute the program RSXMB_SHOW_REORG_STATUS, this will tell you how many messages will be archived/deleted once the job run.
You can set the retention period so that it takes around 50-60K messages, then let the report run ,should finish in 3-4 hours max (thats what i used to do), then go back to sxmb_adm and reduce the retention period.execute the report again and see how many messages it will archive now.
Keep on doing this until you archive/delete all the messages.
Thanks
Aamir -
Having issues finding out how many bytes are sent/recieved from a socket.
Hello everyone.
I've searched the forums and also google and it seems I can't find a way to figure out how many bytes are sent from a socket and then how many bytes are read in from a socket.
My server program accepts a string (an event) and I parse that string up, gathering the relevant information and I need to send it to another server for more processing.
Inside my server program after receiving the data ( a string) I then open another port and send it off to the other server. But I would like to know how many bytes I send from my server to the other server via the client socket.
So at the end of the connection I can compare the lengths to make sure, I sent as many bytes as the server on the other end received.
Here's my run() function in my server program (my server is multi threaded, so on each new client connection it spawns a new thread and does the following):
NOTE: this line is where it sends the string to the other server:
//sending the string version of the message object to the
//output server
out.println(msg.toString());
//SERVER
public class MultiThreadServer implements Runnable {
Socket csocket;
MultiThreadServer(Socket csocket) {
this.csocket = csocket;
public void run() {
//setting up sockets
Socket outputServ = null;
//create a message database to store events
MessageDB testDB = new MessageDB();
try {
//setting up channel to recieve events from the omnibus server
BufferedReader in = new BufferedReader(new InputStreamReader(
csocket.getInputStream()));
//This socket will be used to send events to the z/OS reciever
//we will need a new socket each time because this is a multi-threaded
//server thus, the z/OS reciever (outputServ) will need to be
//multi threaded to handle all the output.
outputServ = new Socket("localhost", 1234);
//Setting up channel to send data to outputserv
PrintWriter out = new PrintWriter(new OutputStreamWriter(outputServ
.getOutputStream()));
String input;
//accepting events from omnibus server and storing them
//in a string for later processing.
while ((input = in.readLine()) != null) {
//accepting and printing out events from omnibus server
//also printing out connected client information
System.out.println("Event from: "
+ csocket.getInetAddress().getHostName() + "-> "
+ input + "\n");
System.out.println("Waiting for data...");
//---------putting string into a message object-------------///
// creating a scanner to parse
Scanner scanner = new Scanner(input);
Scanner scannerPop = new Scanner(input);
//Creating a new message to hold information
Message msg = new Message();
//place Scanner object here:
MessageParser.printTokens(scanner);
MessageParser.populateMessage(scannerPop, msg, input);
//calculating the length of the message once its populated with data
int length = msg.toString().length();
msg.SizeOfPacket = length;
//Printing test message
System.out.println("-------PRINTING MESSAGE BEFORE INSERT IN DB------\n");
System.out.println(msg.toString());
System.out.println("----------END PRINT----------\n");
//adding message to database
testDB.add(msg);
System.out.println("-------Accessing data from Map----\n");
testDB.print();
//---------------End of putting string into a message object----//
//sending the string version of the message object to the
//output server
out.println(msg.toString());
System.out.println("Waiting for data...");
out.flush();
//cleaning up
System.out.println("Connection closed by client.");
in.close();
out.close();
outputServ.close();
csocket.close();
catch (SocketException e) {
System.err.println("Socket error: " + e);
catch (UnknownHostException e) {
System.out.println("Unknown host: " + e);
} catch (IOException e) {
System.out.println("IOException: " + e);
}Heres the other server that is accepting the string:
public class MultiThreadServer implements Runnable {
Socket csocket;
MultiThreadServer(Socket csocket) {
this.csocket = csocket;
public void run() {
try {
//setting up channel to recieve events from the parser server
BufferedReader in = new BufferedReader(new InputStreamReader(
csocket.getInputStream()));
String input;
while ((input = in.readLine()) != null) {
//accepting and printing out events from omnibus server
//also printing out connected client information
System.out.println("Event from: "
+ csocket.getInetAddress().getHostName() + "-> "
+ input + "\n");
System.out.println("Lenght of the string was: " + input.length());
System.out.println("Waiting for data...");
//cleaning up
System.out.println("Connection closed by client.");
in.close();
csocket.close();
} catch (IOException e) {
System.out.println(e);
e.printStackTrace();
}Here's an example of the program works right now:
Someone sends me a string such as this:
Enter port to run server on:
5656
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=5656]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4919,localport=5656] connected.
hostname: localhost
Ip address: 127.0.0.1:5656
Waiting for data...
Event from: localhost-> UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1",424,"9.27.132.139","","Omnibus","Precision Monitor Probe","Precision Monitor","@busch2.raleigh.ibm.com->NmosPingFail",5,"Ping fail for 9.27.132.139: ICMP reply timed out",07/05/07 12:29:12,07/03/07 18:02:31,07/05/07 12:29:09,07/05/07 12:29:09,0,1,194,8000,0,"",65534,0,0,0,"NmosPingFail",0,0,0,"","",0,0,"",0,"0",120,1,"9.27.132.139","","","","dyn9027132107.raleigh.ibm.com","","","",0,0,"","","NCOMS",424,""
Now my program makes it all nice and filters out the junk and resends the new string to the other server running here:
Enter port to run server on:
1234
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=1234]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4920,localport=1234] connected.
Parser client connected.
hostname: localhost
Ip address: 127.0.0.1:1234
Event from: localhost-> PacketType: UPDATE , SizeOfPacket: 577 , PacketID: 1, Identifer: UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1" , Serial: 424 , Node: "9.27.132.139" , NodeAlias: "" , Manager: "Omnibus" , Agent: "Precision Monitor Probe" , AlertGroup: "Precision Monitor" , AlertKey: "@busch2.raleigh.ibm.com->NmosPingFail" , Severity: 5 , Summary: "Ping fail for 9.27.132.139: ICMP reply timed out",StateChange: 07/05/07 12:29:12 , FirstOccurance: 07/03/07 18:02:31 , LastOccurance: 07/05/07 12:29:09 , InternalLast: 07/05/07 12:29:09 , EventId: "NmosPingFail" , LocalNodeAlias: "9.27.132.139"
Lenght of the string was: 579
The length of the final string I sent is 577 by using the string.length() function, but when I re-read the length after the send 2 more bytes got added, and now the length is 579.
I tested it for several cases and in all cases its adding 2 extra bytes.
Anyways, I think this is a bad solution to my problem but is the only one I could think of.
Any help would be great!(a) You are counting characters, not bytes, and you aren't counting the line terminators that are appended by println() and removed by readLine().
(b) You don't need to do any of this. TCP doesn't lose data. If the receiver manages get as far as reading the line terminator when reading a line, the line will be complete. Otherwise it will get an exception.
(c) You are assuming that the original input and the result of message.toString() after constructing a Message from 'input' are the same but there is no evidence to this effect in the code you've posted. Clearly this assumption is what is at fault.
(d) If you really want to count bytes, write yourself a FilterInputStream and a FilterOutputStream and wrap them around the socket streams before decorating them with the readers you are using. Have these classes count the bytes going past.
(e) Don't use PrintWriter or PrintStream on socket streams unless you like exceptions being ignored. Judging by your desire to count characters, you shouldn't like this at all. Use BufferedWriter's methods to write strings and line terminators. -
How to find how many cursors are opend for application user
Hi all,
how to find out how many cursors are opend for application user and how many are opend for database user
Regards,
RMOracle does not know the difference between an "application user" and a "database user".
Oracle deals with a session. This session services a client. The client can be a J2EE application. It can be a Delphi client. It can be a SQL*Plus command line tool. It can be TOAD. Etc.
Oracle does not care who/what/where the client is when dealing with cursors and SQL. It deals with the session that services that client.
How many cursors does a session have opened?
Refer to V$OPEN_CUSOR in [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2008.htm#sthref3807]Oracle® Database Reference.
A select count on V$OPEN_CURSOR for a specific SID (Session ID) will return the number of open cursor handles in that session. -
Can I find out how many clients are connected to a server process?
Hi, I am hoping I can find out how many clients are connected to a server process. This could be either a programmatic lookout number, a number in a log file etc.
By the way, does lookout have any application (not data) logs? I have noticed that occasionally lookout will crash and I cannot find any logs to determine why, what processes were running, who last accessed it etc.
ThanksHello,
There's currently no way to acquire this data. I think that'd be a great suggestion for the product. Please submit your feedback to our developers at the following link: http://digital.ni.com/applications/psc.nsf/default?OpenForm&temp1=&node=
Best regards,
Yusuf C
Application Engineer
National Instruments -
ADF: Best way to find out how many rows are fetched?
Hello,
I have overridden method executeQueryForCollection of ViewObject in which I execute supper.executeQueryForCollection and after that want to find out how many rows are fetched during the execution.
If I try to use getFetchedRowCount I always get "0", if using getEstimatedRowCount, query are being re-executed.
What method is better to use for that?
Thank you,
Veniamin Goldin
Forbis, Ltd.I have a 'home-made' view called RBS, whose definition is this:
create view RBS as
select /*+ RULE */ substr(s.username,1,10) oracle,
substr(case when s.osuser like 'oramt%'
then nvl(upper(s.client_info),'client_info not set')
else substr(s.machine,instr(s.machine, '\')+1,length(s.machine))||':'||s.osuser
end
,1,20) CLIENT
, substr(''''||s.sid||','||s.serial#||''''||decode(s.status,'KILLED','*',''),1,12) kill_id
, lpad(to_char(t.xidusn),4) rbs#
, lpad(to_char(t.used_ublk),4) ublk
, lpad(to_char(t.used_urec),8) urecords
, i.block_gets
, lpad(to_number(round((sysdate - to_date(t.start_time,'MM/DD/YY HH24:MI:SS')) * 60 * 60 * 24)),9) time
, upper(substr(s.program,1,20)) PROGRAM
, to_char(s.LOGON_TIME,'HH24:MI:SS DD-MON') LOGIN_TIME
from sys.v_$transaction t
, sys.v_$session s
, sys.v_$sess_io i
, sys.v_$process p
where s.saddr = t.ses_addr
and i.sid = s.sid
and p.addr = s.paddr
/By monitoring the URECORDS column value of the row that corresponds to my session doing a transaction, I can see how it progresses.
Toon -
Using powershell to find out how many people are using the on-prem SkyDrive
Hi
Is there a way of using powershell to find out how many people are using the on-prem SkyDrive?
Thank you.Hi,
According to your post, my understanding is that you wanted to use PowerShell to find out the users who use the on premise SkyDrive.
As this is the forum for SharePoint Server, I recommend you post your question to the forum for PowerShell or SkyDrive.
Windows PowerShell forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
SkyDrive forum:
http://answers.microsoft.com/en-us/onedrive/forum/sdsignin?tab=Threads
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
All, Any script or method to find out how many users are connected to exchange servers in online mode?
Manju GowdaHi
You have to get the "RPC Client Access" log file in your CAS server. There you can see a column called "client-mode" and it has two modes such
as "classic" and "cached". From there you can get the two different client assess modes and their corresponding users.
probably take this file openup on excel and filter to see the two modes
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
I have an issue where show env o/p is as below, I suspect the FAN 1 which shows failed is not present in router, how do i find out with the help of CLI , how many fans are present in router.
#show environment all
SYS PS1 is present.
Fan status: Normal
Input Voltage status: Normal
DC Output Voltage status: Normal
Type: AC
Thermal status: Normal
SYS PS2 is present.
Fan status: Normal
Input Voltage status: Normal
DC Output Voltage status: Normal
Type: AC
Thermal status: Normal
AUX(-48V) PS1 is absent.
AUX(-48V) PS2 is absent.
Fan 1 Failed
Fan 2 Normal
Fan 3 Normal
Fan Speed is Normal
Alert settings:
Intake temperature warning: Enabled, Threshold: 55 Core temperature warning: Enabled, Threshold: 70 (CPU: 90)
Board Temperature: Normal
Internal-ambient temperature = 28, Normal CPU temperature = 41, Normal Intake temperature = 22, Normal Backplane temperature = 19, Normal
Voltage 1(3300) is Normal, Current voltage = 3284 mV Voltage 2(5150) is Normal, Current voltage = 5153 mV Voltage 3(2500) is Normal, Current voltage = 2525 mV Voltage 4(1200) is Normal, Current voltage = 1203 mV
Nominal frequencyThis means that FAN1 has failed.
Fan 1 Failed
Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported. Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported. -
Yosemite mail v8.0 not showing how many messages are in a mailbox. For example inbox. Before upgrading it used to show how many messages you had in your inbox. anyone know how to switch "on" the number of messages? Or has this feature been removed?
Agreed! This feature was very useful. If you find out how to turn it on, please let me know.
Apple, there is plenty of room in the window header all the way across on both sides of the word "Inbox". It's important to know many messages are in the Inbox. It provides a progress meter when you're cleaning out mail and striving for inbox zero. -
Need to find out how many users are using Siebel Application
Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasunHi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed -
Find how many users are connected in the Oracle Server
Hi,
I am using Oracle 10g. My question is, is it possible to find how many users are connected in the Oracle Server. We are having one Server and we are having many client machines which will connect the Oracle.
And one more question in the meanwhile i want to take Backup of one database which client as connected. Is it get any problem to the client machine which is accessing the server. And How to take the backup from the server machine. Any commands to process.
Thank u...!Hi there.
If You run
select count(*) from v$session where username is not null;you'll get the number of users connected to Oracle server,
and yes , you could do backup while users are connect to db you are backing up.
cheers
Maybe you are looking for
-
Hiding a tablix column conditionnaly from page to page (group member to group member)
Hi I have the following report Col1 Col2 Col3 Group1 1 2 3 2 4 3 3 6 6 (page break) Col1 Col2 Col3 Group2
-
A lot of problems with itunes..
First of all I can't sincronize my iphone beacause it stops during the backup (this happens also if I open itunes as administrator). So I think to unistall and re-istall itunes and i tried to organize my library (copy all the file in a directory). In
-
After upgrading to ubuntu 11.10 the firefox 6 browser cannot download and open .jnlp file from the interactivebrokers website. Usually I go to the IB website and download tws.jnlp file which is opened in the firefox web browser. But now when I click
-
SQL Statement error - Kindly help!
Been scratchin my head but still can't figure why it's failing ..Trying to populate the space usage for the relevant tablespaces: Get the below error. Kindly advice? column free_space_mb format 9999999.999 column allocated_mb format 9999999.999 colum
-
Hi all, I want to create the file system repository for my system . Here is what i have done. Created a directory on my local machine and shared it giving the folder full access. Created a system in CM and system configuration (KM windows system) and