How to find the activity of the Info cubes or any other Info Provider

Hello everyone,
Is there anyway to find out the last activity date of the info cube or any other info provider?
One way is through tools--> Statistics for BI (But this is not working as I do not have enough authorizations in the office)
So, can anyone please give me a way to know the last activity date of all the Info Provider so that respective action can be taken on the Info Provider according to their usage.?
I also need the Procedure to know the activity of the queries also?
Hope to get an answer soon..!
Thanks in advance..!
Deepak

Hi,
Are you looking actvity related to (Data retrival or data load)? (When the last time data loaded in Info provider or when the last time query is executed on that Info provider)?
If this is your requirement then BI statistics is only way to find out so get the authorization for the same.
If your need is -- last changed/llast data load etc.. then you may check the option "last changed at" at in Info provider maintinence, and data load dates.
I hoep it will help.
Thanks,
S

Similar Messages

HT1529 how to find my iphone with the serial number

hi
could you please tell how to find my iphone with the serial number ?

Sorry, there is no way to do that.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
       Find My Mac can be used from Find My Phone at iCloud.com and via Find
       My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0

How to find referenced photos within the Photos app

Problem:
Upon instructing Photos to use iCloud Photo Library, the app informed me:
"104 referenced files in your library will not upload to iCloud Photo Library. Select referenced files in your library and choose 'Consolidate' from the File menu to copy the original files into the library."
I do not know which 104 images in my library are referenced, and therefore cannot use "Consolidate" to import the masters into the library.
Can anyone tell me how to find referenced files, within the active library in the Photos app?
I am not asking how to use the "Show Referenced File in Finder" menu command. I need to identify a file as referenced first, hence this post!

Gotcha - came up with a workaround... since the photos were living in the Photo Library packaged itself, and not simply in another regular folder, I right clicked on the library and said show packaged content, then search for what folders the files lived in, then copied the files out of the packaged library into a folder. Then I was able to give the Photos Library access to the new folder with the files.
With all my files now references, I enabled iCloud Photo Library and am uploading now.
Hopefully my new local Photo Library will be smart enough to optimize local images and shrink to give me more space.
Thanks.

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How to find out what are the functions supported by string class

Hi,
Can any one let me know how to find what are all the functions supported by the string class in standard(STL) library on solaris.
Regards,
Vignesh

1. Any C++ textbook that covers the Standard Library will tell you about the standard string class. A good tutorial and reference for the entire Standard Library is "The C++ Standard Library" by Nicolai Josuttis, published by Addison Wesley.
2. WIth Sun C++, the command
man -s3C++ basic_string
provides documentation for the default libCstd version of the Standard Library.
3. You could look at the <string> header itself. I don't recommend that approach.

How to find out Locks on the database objects

how to find out Locks on the database objects

The following notes should be helpful:
Note: 200590.1 - bde_session_locks.sql - Locks for given Session ID
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200590.1
Note: 1039273.6 - SCRIPT: VIEWING LOCKS ON OBJECTS HELD BY SPECIFIC USER
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1039273.6
You can also search Metalink, there are many notes/scripts published there which would be also helpful.

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How to find latest entry in the table according to time

how to find latest entry in the table according to the time
is there any function module to do so
\[removed by moderator\]
Regards
Shashi
Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

Hi,
If you want to read the entry from an internal table,
sort the internal table in the descending order by the time and
delete adjacent duplicates by comparing the fields other than time and the internal table will have the latest record.
Suggestion: instead of only time try to have one more field called date with the time combination
Regards,
Ramesh

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

HT204389 I just got an iPhone 4S model number MD439LL/A still have the box that it came in along with other info. I can not find Siri. I have looked in settings general and settings general restrictions. Can anyone help me out?

I just got an iPhone 4S model number MD439LL/A still have the box that it came in along with other info. I can not find Siri. I have looked in settings>general and settings>general>restrictions. Can anyone help me out?

That model is an iPhone 4, not a 4S.
http://support.apple.com/kb/HT3939

I downloaded lion but lost the setup assistant. please help me recover the setup assistance. i do not know where/how to find/enter information in the terminal.

i downloaded lion but lost the setup assistant. please help me recover the setup assistant. i do not know where/how to find/enter information in the terminal as was suggested.

Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
sudo rm /var/db/.AppleSetupDone
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
Reboot. The Setup Assistant will launch.

How to find which instance in the RAC cluster the application is connected

How to find which instance in the RAC cluster the application is connected to ?
Raees

well if you know the user through which your application is connected to instance, you can easily find out by querying gv$session view.
select inst_id,sid,serial#,program,username from gv$session where username is not null;
Thanks
Gaurav

HT201269 Gave my iPhone 4 away to someone w/ a 3GS, so how does service get activated on the new device? All docs transferred already via iCloud.

Gave my iPhone 4 away to someone w/ a 3GS, so how does service get activated on the new device? All docs transferred already via iCloud.

That person needs to contact their cellular carrier.

How to find the activity of the Info cubes or any other Info Provider

Similar Messages

Maybe you are looking for