How to find the changes in Settlement receiver of a PM order?

Hi Gurus,
              Need your valuable inputs on this issue.
I Have a PM order where in I have created a settlement Receiver.If i change the settlement receiver i dont see the chnages in The Action Log or changes.This makes it difficult to trace the chnages made if the settlement receiver.
Where can i find these chnages ?
Whereas if i chnage the Cost Center or Profit center i can find them in the changes or Action log in the PM order
why is this differnce
Please give your inputs
regs
leo

Hi Pete,
           Thanks for your response.When i follow what you mentioned i get the error no chnage document found.
In My order I changed the Settlement receiver from cost center to WBS but still bo chnage was shown.
Please suggest where to look further..and seeting to check for the same
regds
leo

Similar Messages

  • How to find the changes made in spro configuration?

    Dear Friends,
    From my client side, some configuration changes were happened directly to production client not by the consultants. How to trace this that what changes have been made through log or table. We found that in spro->utilities->change log is in switched off mode. We came to know that through this log we can find the changes happened or not. Is it so? or is there any other solution to trace it?
    Please advise.
    thanks & regards
    sankar.

    thanks friends for your prompt replies.
    But, as i said clear, the changes made to production client directly and not by any request. How can we detect who has changed the log settings.
    ****Default account assignment configuration was changed.
    Please advise.
    thanks & regards
    Sankar.

  • How to find the Changes like functional location category

    Hi Experts,
    Can anyone guide me as to how to get the changes in Func loc category made  for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
    Faster response will be highly appreciated and rewarded.
    Regards,
    Manish

    Hi,
    Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
    Regards,
    Maheswaran.

  • How to find the changed objects of a transformation

    Hi,Experts
    If you someone changed the transformation,I want to know how he changed it?What I mean is which object,which rule he changed.How can i know that?whether the system can provide that information or not?
    Thanks!
    Best regards!
    Edited by: kun luo on Apr 28, 2008 11:26 AM

    Hi Kun,
                 Check with version managemnet....
    http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e0fb4eb711d182bf0000e829fbfe/frameset.htm
    Regards,
    Vijay.

  • How to find the original net value for a cancelled sales order

    Hi experts,
    From VA03 or table VBAP, net value for those cancelled items is always zero. Where to find those cancelled items' original net value?
    Thanks a lot.
    Yu

    Thanks Seshu,
    I just tried it as per your suggestion but I found for non-cancelled items konv-kbert is not equal to the net value taken from vbap-netwr.  So I wonder if knov-kbert is the right original net value for those cancelled items.
    Yu

  • How to find the recent changes done in the workflow by user id ?

    Hello all,
    How to find the recent changes done in the workflow by user id ?
    I have made changed in Production system .
    Like changing the status ,
    changing the agent ,
    but for these it will , not ask for any request .
    So i want to know is there any method to find what are the changes done by me ?
    Thanks and regards
    Prem

    Hi,
    This is caused by mandant settings in scc4. It's better not to make changes in PRD, because then your DEV en QA systems differ.
    Kind regards, Rob Dielemans

  • How to find the workflow for Change Request for the PO's

    Hi All,
    We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
    what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
    Your input will be highly appreciated.
    Thanks in advance
    Rgds,
    Sonia

    For 11.5.10.2 run this query to determine the keys to search on:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
    Then use the keys returned by the query to look up the Workflow in
    Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
    Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
    The query for change requests on a specific Requisition would be:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

  • How to find the reports/Txs that are affected by changes made in NA30

    Hi All,
    Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
    Many thanks & Regards,
    Vijaya

    No idea about any such report but from SAP help got following list of billing reports. It might be helpful
    RNAABGR0 IS-H: Revenue Accrual
    RNAABRKZ IS-H: Change Billing Indicator of a Case
    RNABD000  IS-H: Patient Billing
    RNABILB0   IS-H: Change Billing Block via Conditions
    RNABILB1   IS-H: Change Billing Block via Conditions (Outpatient Cases)
    RNADIN03   IS-H: Billing Document Mass Print Program
    RNAFSPER  IS-H: Change Billing Block
    RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
    RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
    RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
    RNASED00 IS-H: Delete Case Selections
    RNASEK00 IS-H: Copy Case Selection
    RNASELM0 IS-H: Billing - Process Messages
    RNASEL00 IS-H: Case Selection
    RNASEL01 IS-H: Case Selection via Outpatient Visits
    RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
    RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
    RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
    RNASTO04 IS-H: Cancel Provisional Invoice
    RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
    RNAENT00 IS-H: Billing Status of Inpatient Cases
    RNA_CASCADE_BILLING IS-H: Cascade Bill Processing

  • How to calculate the number of sent/received emails of a certain domain

    Thank you for what you have helped me with!
    How to calculate the number of sent/received emails of a certain domain in a certain period? It is Messaging Server 5.2, Directory Server 4.2. Is there a log option for this?
    Thank you.

    Not sure where you find, "LOG_MESSSAGE_ADD". I don't actually find this option in the documentation.
    The domains that mails are coming from and being sent to are certainly logged in the normal mail.log, so why mess with additional logging options? If you're talking about "LOG_CONNECTION", I actually see no additional data that is useful to you.
    If you decide to change the option.dat, you do indeed need to
    imsimta cnbuild (note, it's not cnrebuild)
    imsimta restart
    If I were facing the same issue, I'd be looking at the log parsing perl script, and simply modifying it to do what I wanted.

  • Reg - how to find the purpose of methods in a class

    hi everyone,
               can u plz help me with how to find the purpose of methods in a class???????
    a description abt the methods in a class??????
                        thx in advance,
    regards,
    balaji.s

    Hi Balaji
    Pls find some stuff.
    reward pts if help.
    The following statements define the structure of a class:
    ·        A class contains components
    ·        Each component is assigned to a visibility section
    ·        Classes implement methods
    The following sections describe the structure of classes in more detail.
    Class Components
    The components of a class make up its contents. All components are declared in the declaration part of the class. The components define the attributes of the objects in a class. When you define the class, each component is assigned to one of the three visibility sections, which define the external interface of the class. All of the components of a class are visible within the class. All components are in the same namespace. This means that all components of the class must have names that are unique within the class.
    There are two kinds of components in a class - those that exist separately for each object in the class, and those that exist only once for the whole class, regardless of the number of instances. Instance-specific components are known as instance components. Components that are not instance-specific are called static components.
    In ABAP Objects, classes can define the following components. Since all components that you can declare in classes can also be declared in interfaces, the following descriptions apply equally to interfaces.
    Attributes
    Attributes are internal data fields within a class that can have any ABAP data type. The state of an object is determined by the contents of its attributes. One kind of attribute is the reference variable. Reference variables allow you to create and address objects. Reference variables can be defined in classes, allowing you to access objects from within a class.
    Instance Attributes
    The contents of instance attributes define the instance-specific state of an object. You declare them using the DATAstatement.
    Static Attributes
    The contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
    All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
    The technical properties of instance attributes belong to the static properties of a class. It is therefore possible to refer in a LIKE addition to the visible attributes of a class – through the class component selector or through reference variables, without prior creation of an object.
    Methods
    Methods are internal procedures in a class that define the behavior of an object. They can access all of the attributes of a class. This allows them to change the data content of an object. They also have a parameter interface, with which users can supply them with values when calling them, and receive values back from them The private attributes of a class can only be changed by methods in the same class.
    The definition and parameter interface of a method is similar to that of function modules. You define a method meth in the definition part of a class and implement it in the implementation part using the following processing block:
    METHOD meth.
    ENDMETHOD.
    You can declare local data types and objects in methods in the same way as in other ABAP procedures (subroutines and function modules). You call methods using the CALL METHOD statement.
    Instance Methods
    You declare instance methods using the METHODSstatement. They can access all of the attributes of a class, and can trigger all of the events of the class.
    Static Methods
    You declare static methods using the CLASS-METHODSstatement. They can only access static attributes and trigger static events.
    Special Methods
    As well as normal methods, which you call using CALL METHOD, there are two special methods called constructor and class_constructor that are automatically called when you create an object or when you first access the components of a class.
    reward pts if help.
    deepanker

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to find the number of users  connected to database from OS level(Linux)

    Hi All,
    Could anyone know , how to find the number of users connected to database without connecting with sql*plus
    is there any command to find it?
    example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
    oracle version:- 10g,11g
    Operating System:- OEL4/OEL5/AIX/Solaris
    any help will be appreciated.
    Thanks in advance.
    Thank you.
    Regards,
    Rajesh.

    Excellent.
    Tested, works as long as you set the ORACLE_SID first ( to change databases )
    ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
    Thanks!
    select OSUSER
        from V$SESSION
    where AUDSID = SYS_CONTEXT('userenv','sessionid')
        and rownum=1;Best Regards
    mseberg

  • How to find the number of ODBC connections to Oracle Database

    Hi All,
    How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
    Thanks in advance,
    Mahi

    What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
    For example: if you already know of a user using ODBC, you can verify as:
    select username, osuser, terminal, program from v$session where username = 'SCOTT'
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
    SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
    Hope this helps...

  • How to find the number of columns in an internal table DYNAMICALLY ?

    Hi,
    How to find the number of columns in an internal table DYNAMICALLY ?
    Thanks and Regards,
    saleem.

    Hi,
    you can find the number of columns and their order using
    the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = sy-repid
       I_INTERNAL_TABNAME           = 'ITAB'
       I_INCLNAME                   = sy-repid
      changing
        ct_fieldcat                  = IT_FIELDCAT
    EXCEPTIONS
       INCONSISTENT_INTERFACE       = 1
       PROGRAM_ERROR                = 2
       OTHERS                       = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif
    now describe your fieldcat . and find no of columns.
    and their order also..
    regards
    vijay

  • How to find the number of records per months  in cube

    Hi,
      how to find the number of records per months for my all cubes?
      Can i use the ListCube transaction to find totl number f records per cube monthwise ?
    Jimmy

    Hi,
    Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
    1.Copy the code into your Z<programname> from Se38.
    2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
    3.Save program.
    4.Schedule the program in background as required
    5.Create cube with infoobjects to hold no of records and Infoprovider name
    6.Load this cube based on event after the program job is done.
    Hence you can report on this cube to see no of records in  CUBE or ODS in your box.
    Please find the code below.
    Cheers,
    Kavitha Kamesh.
    types: begin of itabs ,
          tabname type dd02l-tabname,
          end of itabs.
    data: itab type itabs occurs 0 with header line.
    data: counter type i.
    data: begin of itab1 occurs 0,
    tabname type dd02l-tabname,
    counter type i,
    end of itab1.
    DATA: ITABTABNAME TYPE STRING.
    DATA: LENGTH TYPE I.
    DATA: OBJECT(30).
    data: str(6) type c.
    select  tabname from dd02l into table itab where ( tabname LIKE  '/BIC/F%' or tabname LIKE  '/BIC/A%00' )
    and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
    loop at itab.
      select count(*) from (itab-tabname) into counter.
      str = itab-tabname.
      if str = '/BIC/F'.
    LENGTH  = STRLEN( ITAB-TABNAME ).
      SHIFT  itab-tabname BY 6 PLACES LEFT.
    ELSEIf  str = '/BIC/A'.
      SHIFT  itab-tabname BY 6 PLACES LEFT.
      LENGTH  = STRLEN( ITAB-TABNAME ).
    LENGTH = LENGTH - 2.
    endif.
      itab1-tabname = itab-tabname(LENGTH).
      append itab1.
      itab1-counter = counter.
      clear itab-tabname.
      clear:  COUNTER.
    endloop.
    *********** itab1
    loop at itab1.
    write:/ itab1-tabname, itab1-counter.
    endloop.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                    =
        FILENAME                        = 'c:records.xls'
        FILETYPE                        = 'ASC'
    *   APPEND                          = ' '
        WRITE_FIELD_SEPARATOR           = ','
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    * IMPORTING
    *   FILELENGTH                      =
      TABLES
        DATA_TAB                        = itab1
    *   FIELDNAMES                      =
    * EXCEPTIONS
    *   FILE_WRITE_ERROR                = 1
    *   NO_BATCH                        = 2
    *   GUI_REFUSE_FILETRANSFER         = 3
    *   INVALID_TYPE                    = 4
    *   NO_AUTHORITY                    = 5
    *   UNKNOWN_ERROR                   = 6
    *   HEADER_NOT_ALLOWED              = 7
    *   SEPARATOR_NOT_ALLOWED           = 8
    *   FILESIZE_NOT_ALLOWED            = 9
    *   HEADER_TOO_LONG                 = 10
    *   DP_ERROR_CREATE                 = 11
    *   DP_ERROR_SEND                   = 12
    *   DP_ERROR_WRITE                  = 13
    *   UNKNOWN_DP_ERROR                = 14
    *   ACCESS_DENIED                   = 15
    *   DP_OUT_OF_MEMORY                = 16
    *   DISK_FULL                       = 17
    *   DP_TIMEOUT                      = 18
    *   FILE_NOT_FOUND                  = 19
    *   DATAPROVIDER_EXCEPTION          = 20
    *   CONTROL_FLUSH_ERROR             = 21
    *   OTHERS                          = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

Maybe you are looking for

  • How do I change my ipod to another computer?

    My computer crashed and I purchased a new one. How do I take all of my music off my ipod and put it on the new computer? Any help please!

  • How do I listen to Live365 stations in iTunes 11?

    Hello everyone, I had been listening to various Live365 internet radio stations via iTunes and I had been having a few problems using iTunes 10, and so earlier today, I upgraded to iTunes 11.  The only problem I face is that, after looking everywhere

  • Tool/Menu bar icons not active - Acrobat in BROWSER

    I have installed the SP1 update of windows 7.  I have the latest version of Acrobat 10. I also have the latest version EXPLORER (9) & FIRE FOX (4).  The PDF file comes into the BROWSER & the Acrobat icons (print, save) show up on the tool/menu bar bu

  • How to Create Tab Logos?

    many websites have little logos placed next to their IP address and next to the webpage title which appears on its tab in the IE browser (such as Adobe's red and white logo). Websites which do not set any logos have the generic IE logo next to their

  • Is it possible to style a tag button with CSS?

    hello, i'm currently using button images for Add to Cart etc. but would prefer to use CSS. any idea how the html should look to facilitate this? atm if i change it from an image to text, i.e. {tag_addtocart,Add to Cart}, the CSS formatting is ignored