How to find the changes made in spro configuration?

Dear Friends,
From my client side, some configuration changes were happened directly to production client not by the consultants. How to trace this that what changes have been made through log or table. We found that in spro->utilities->change log is in switched off mode. We came to know that through this log we can find the changes happened or not. Is it so? or is there any other solution to trace it?
Please advise.
thanks & regards
sankar.

thanks friends for your prompt replies.
But, as i said clear, the changes made to production client directly and not by any request. How can we detect who has changed the log settings.
****Default account assignment configuration was changed.
Please advise.
thanks & regards
Sankar.

Similar Messages

  • How to see the changes made for iPad in iTunes on my iPad?

    How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

    Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
    Thanks for your help, it works now :-)

  • Through which T code can I find the changes made to outbound delivery

    Through which T code can I find the changes made to outbound delivery
    Regards

    Go to VL03N > Environment > Changes .Here write down the Item Number and you have the option to see the Detail View & Overview.
    Best Regards,
    Ankur
    Edited by: Ankur Agrawal on Sep 30, 2009 12:36 PM

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • Swing .............how to undo the changes made by user

    Hi,
    i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
    now i have placed two buttons there.
    one is Apply and second is Cancel.
    when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
    can anybody help me how this can be done and what code should i write in action performed method
    thanks in advance
    plz reply

    thanx.
    one more thing
    In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
    1) Now how can i restrict user to create one more internal frame unless first one is closed.
    2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
    3) and how can pass those parameters value to my main frame from where i m calling internal frame
    Plz reply
    Edited by: neel007 on Mar 11, 2009 8:02 PM

  • How to know the changes made to Quotations & Sales orders?

    Hi all
    I want to know how we can have the records of changes and alterations that are made in quotations and Sales orders. For example, once the quotation is created and saved, there must have been many alterations either on pricing or in terms & conditions based on the final negotiations with the customer. Please let me know how do we record the changes.

    Hi,
    what ashish told is exactly correct.You just go to the Environment-changes and execute,it will shows all the changes made for that order like pricing,payment terms etc.
    Regards,
    Hari.

  • How to find the Changes like functional location category

    Hi Experts,
    Can anyone guide me as to how to get the changes in Func loc category made  for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
    Faster response will be highly appreciated and rewarded.
    Regards,
    Manish

    Hi,
    Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
    Regards,
    Maheswaran.

  • How to Track the changes made to the custom table field value

    I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
    Thanks & Regards,
    Kranti

    Hi Satya,
    These are the steps you've to do.
    1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
    2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
    3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
    4. You can keep track of the changes made to the table by monitoring these tables.
    Regards
    Anil Madhavan

  • Query to find the Changes made in PO

    I want to Create a report of the changes made in PO.Tried using the ADOC and ADO1 table.But not able to get the link.Kindly Suggest

    Hi,
    Yes possible by means of print sequence. Please follow below steps:
    1. Administration--->Setup---> General--->Report and Layout Manager--->Choose purchase order
    2. Choose print sequence tab
    3. Add new print sequence for the PO. First assign your regular PLD and assign newly created PLD ( above PLD)
    4. Open PO under Purchase A/P module.
    5. File---->Print sequence
    6. Both PLD can be previewed and printed
    Note: If there is no changes in PO, i think it is not necessary print second PLD
    Thanks & Regards,
    Nagarajan

  • How to stop the changes made for the BP in CRM not to update in R/3

    Hello Gurus''
    we are in need of help......i have an issue...the issue is
    Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
    Where as in our case the data is updateing in R/3
    Here by requesting you all to help me out how to stop the updaation of some changes  which are made in CRM , that should not be in R/3
    Point will be given......
    Regards
    sreeram Raghu

    Hello
    Thanks for ur reply.........
    We have the following business process
    We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame  customer is replicated in R/3 fro sales.
    What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
    can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
    >publication>All BP(MESG)->Replication object-->Bupa_Main
    >Sites-->SQ1_300
    If we do this process does the issue will fix or else we need to do soem thing more...
    Thanks in advance
    Regards
    Sreeram Raghu
    +91-99 94 94 82 72

  • How to find the changes in Settlement receiver of a PM order?

    Hi Gurus,
                  Need your valuable inputs on this issue.
    I Have a PM order where in I have created a settlement Receiver.If i change the settlement receiver i dont see the chnages in The Action Log or changes.This makes it difficult to trace the chnages made if the settlement receiver.
    Where can i find these chnages ?
    Whereas if i chnage the Cost Center or Profit center i can find them in the changes or Action log in the PM order
    why is this differnce
    Please give your inputs
    regs
    leo

    Hi Pete,
               Thanks for your response.When i follow what you mentioned i get the error no chnage document found.
    In My order I changed the Settlement receiver from cost center to WBS but still bo chnage was shown.
    Please suggest where to look further..and seeting to check for the same
    regds
    leo

  • How to trace the changes made by other user in portal

    Hi All,
    Actually i have a requirement like, some body has done some changes in Development server how to trace those chnages in portals or Visual Admin (who is the user and what are all the objects that got changed) .
    Actually our development system , Quality and Production systems are working fine till yesterday but when we logon to the dev, qua, prd systems today there are some changes and some of the things are not working client was asking us whether we have done some canges if not who has done the changes.
    Is there any place where all these changes can be recorded (likes who is the user and changes ....) or traced like log files or any thing else
    Can any one help me out in this regard.
    Thanks & Regards,
    Ramesh.

    Hi ,
    As you told some changes identified. so navigate to corresponnding portal obejcts and find modified and last changed by similar properties in the property editor object.
    portal activity reports gives how many users visted specific pcd object but not who visited. You can use pcd filter to compare properties.
    Regards,
    Koti Reddy

  • How to Know the changes made on a program and complete activity on it

    Hi abapers,
    I want to know who is working on a particular report currently and check the complete activity like changes made on the report.
    Is there any transaction to check this, please let me know
    Thanks in advance
    Bond

    Hi,
    See also this help on version management
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e0fb4eb711d182bf0000e829fbfe/frameset.htm
    Eddy
    PS.
    Did you (and your colleagues) put yourself on the SDN world map already? Pls check
    /people/eddy.declercq/blog/2006/06/14/from-the-grumpy-old-man-hoy-en-el-mundo
    for details.

  • How to reverse the changes made in a report program

    Hi Friends,
        I want to change a report program,but this report program is locked under one tp which is not yet released and it is in development only .I want to change the same report program but don't want to keep the changes done in the existing tp.I want to keep only changes which i will do.
    Please help me to achieve this task.
    Thanks in advance.
    Regards,
    Rajesh

    hi
    if u have done<b> Version Management</b> then u can retrieve the previous version of ur report
    <b>Version Management is done in utilities -> versions ->Version Management</b>
    otherwise its not possible.
    regards
    ravish
    <b>plz dont forget to reward points if helpful</b>

  • How to propagate the changes made in Essbase outline to Planning

    Hi,
    I have created a userdefined dimension called 'Product' with one member 'SampleProduct' in planning. I logged into essbase and accessed the outline created for the plan type. In the outline, under product dimension, I have created one more member called 'ChanduProduct' and saved the outline. what should I do to see the new member created in essbase outline in Planning application?
    Similarly I changed the density of Product dimension from sparse to dense in essbase. How can I propagate this change to planning application? Please tell me whether we can do this operation or not. If yes, how to do?
    Thanks in advance,
    Chandu

    Hi Chandu,
    the outline of planning is stored in sql repository.
    when you refresh the planning application using manage database in administration; all changes from planning will propagate to essbase.
    you should not make changes in essbase outline.
    all changes in outline should go through planning web application (this is one of the best practices)
    hope this helps.

Maybe you are looking for

  • Cost center planning by functional area

    hi gurus, The client needs to do manual planning in CO (KP06) by cost center/cost element/fund/functional area. This data is later gets rolled up in FM to formulate the budget data. The client wants to enter all the account assignment manually except

  • Highligting  the current Row

    Hi All, I have made a search form by name like we get in google . now when i select particular name from the drop down then corresponding to name the record should be highlighted with different colors in the form. so how can i solve this problem can

  • Who have successfully deploy livecycle workflow 7.2.1 bam  on weblogic?

    Hi all ,<br />   I have successfully install the livecycle workflow 7.2.1 on weblogic 8.1.5 ,but when I installed bam manually on weblogic following the weblogic_install_config_7_2.pdf , it made some errors on starting the server . The error informat

  • Notes duplicated...but not

    Here's the problem: There were double entries for all my notes in Apple Mail.app but not on my iPhone or iPad. I tried resetting data on phone and iPad and there were still single sets on the devices and doubled in mail. I made sure all the notes wer

  • 4.1 setup for x

    I have had my X-Fi Extreme Music for a few days and I am very pleased with the improvement over my Audigy, particularly the much lower noise levels. I am running the card with analog out to two pairs of speakers powered with one stereo amplifier each