How to find the characteristics assigned to a dimention

Hi all,
Can anyone please tell me how I can find the characteristics assigned to a dimention. Can I see that information in Infocube-Change or is there a transaction code to find?
thanks,
Sabrina.

Hi Sabrina,
You can surely look at it in InfoCube > Change...have you tried out the Graphical assignment, it looks better. Also youcan try out transaction LISTSCHEMA.
Another way though roundabout is through SE11 > CUBENAME > F4. Then pick a table and Display.
Hope this helps...

Similar Messages

HR-ABAP.How to Find the Employees assigned to the Appraisal Template

Hi ,
Please help me out.how to find the employees assigned to the Appraisal template.
Ex. 7825232 is a appraisal template id and i want to know in the system how many employees assigned to it..
Please let me know if the post is missing something.
Suggestion also appreciated ...
Thanks Inadvance!
Law.

check this fm HRHAP_DOCUMENT_GET_LIST_XXL
Thanks
Bala Duvvuri

How to find the plant assigned to a user profile

Hi All,
i am new to SRM but supporting it. so pls help.
how to find the plant assigned to a user profile?
i need to assign a address code to a company code-plant-building code so that the shipping address should come as a default in the shopping cart.
i found many plants in the PPOMA_BBP transaction but could not understand which plant i should take for the abhove assignment.
Thanks in advance.
Regards,
Anubhab

Hi,
There is one check box in transaction for default value for every attribute. And a particular attribute there has to be a default value.
Use FM BBP_GET_ATTRIBUTES_AT03 to fetch all attributes for a particular shopper. Then check for the particular attribute witha default value.
In this way you will get default plant for that shopper can further requirement can be completed.
Regards,
Brajvir

How to find the organization assigned to a responsibility from sqlplus

Hi,
I want to find the organization name which is assigned to a responsibility 'X' using SQL plus.
Any suggestions?
Thank you
KK

sql> exec fnd_global.apps_initialize(user_id,resp_id,resp_app_id);
sql> select fnd_profile.value('ORG_ID') from dual;

How to find the users who r assigned to profile sap_all through su01

how to find the users who r assigned to profile sap_all through su01

you can get into SUIM-->where used lists, check for users with profile SAP_ALL you can get a list of users who have
it. and you can get into SUIM through SU01 from user information system link.
you can execute RSUSR002 from SA38/SE38.
RSUSR002 is the report which gets you the whereused list for profiles within roles, users.
you can get it from transaction SECR ofcourse you are executing the same report.
you can get from UST04 table and obviously USR04 also because sometimes you miss some details from UST04 because of sync problems.

To know how to find the Creation date, Assignement date and Activation date

Hi All,
    Can you please guide me to find the answer for the below mentioned questions:
Apart from Change log ,
1, Creation date
     May I know is there any approach to find the Creation date of a particular Pricing condition type.
2. Assignment date -
    How to find the assignment date of a particular condition type to a pricing procedure.
3. Activation Date -
    May I know is there any to find out the date of Activation for the Customer hiearchy in T code VDH1N
Presently I'm working on SAP ECC 6.0For the above question I tried T codes and table but I'm not able to find out exactly. Even in Change logs I'm not able to get it.
Can you please guide me where I'm missing.
Thanks in Advance
Thanks & Regards,
Pugal

Hi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM

K mean:: how to find the clustred data;:: or how to assign number t0 each group of data

hi member
i have download the LabVIEW Machine Learning Toolkit https://decibel.ni.com/content/docs/DOC-19328
i want to excute the K mean algorithem to cluster the image in two group or three or more
the problem is how to find the result i mean the clustred image', the image that contain 2 or three intesity value only
or how to aasign a 1 vlaue to all intesity that
belong to cluster one and 255 to data that belong to cluster 2
so that the image look like binary image???
a my vi below
best regards
Solved!
Go to Solution.
Attachments:
k mean.vi ‏12 KB

my post before showed how to set the threshold manually using the graph's cursor.
here's the automated k-means version, using the toolkit's .vi
Alex
♜♖ LabView 8.6 - LabView 2014 ♖♜
Attachments:
2013-06-22_2dhistogram 2009.zip ‏61 KB

How to change the characteristics of a Batch

Dear All,
We have maintained a batch sort sequence based on Batch Manufacturing date.
But now customer wants the batch to be sorted out based on Batch Number.
How to change the Characteristics from Batch Manufacturing date and Batch Number?
Please do suggest.
For example, we have two characteristics assigned to the Class One is Manufacturing date and another is Batch Number.
How system will sort out a batch based on these two logic.
Kindly explain.
Regards,
Mullairaja

Hi Mullai,
I hope you know what do you mean by "Dependencies" in variant configuration. These are created for automatic update of characteristic values. If you want to delete the characteristic from the class, please do teh following.
1. Find out that there are any dependencies assigned to this characteristic. If so remove the assignment
2. Then you have to check if this characteristic is used in any dependency in the code. If so, find the implications of the same.
In case, you dont know what is dependency, may be they are not used in your project. In this case, you can just remove the characteristic from the class.
It has got one effect.
At present, a configured batch will have this characteristic. If you go to the batch master in change mode, then the old classification will be replaced by the new classification. So the deleted characteristics will not be available to you anymore. I hope that is fine with you. If this is fine, then you dont need to worry about removing the characteristic from the class.

How to find the open PR in SAP

how to find the open PR list in SAP

HI,
Using T-code ME5A - List Display of Purchase Requisitions and give input data's are as follows.
Plant                : _______
Scope of List : ALV
Tick Mark of the below options :
       Assign Purchase Requisition to be tick
       "Partial Ordered" Requisitions to be tick
        Released Requisitions Only to be tick
        Requisition for overall Release to be tick
After that, execute the report shown only released and Open purchase requisition(PR) details.
Hope, it is useful for you.
Regards,
K.Rajendran

How to view the characteristics in process order

Hi, How to see the characteristics in process order screen which are assigned in material master classification view. say, created a material and assigned some characteristics in classsification view. for the same material created a process order. like to see those characteristics in process order. is it possible. please advise.

raju
to see this characteristic in the process orden you should go to Header >> CO Classification. If you want to add a characteristic, this should be added to SAP_KKR_CLASS. Characteristics for material (001) are not the same than those for CO Classification (013), so you should develop some special report (we did some special developmet for the printing of order forms )
regards

How to get the value assigned in dropdowmlistbox as well as radio button

Hi Everybody,
   Please help me to find the solution for the following:
   1. How to get the value assigned in dropdowmlistbox?
   2. How to get the value assigned in radio button?
I am waiting for the answer and reply...
Thanks & Regards,
ShanthaKumar.KA.

The radio button has a name attribute. That name attribute should be the same as the bean property. Then you just need a
<jsp:setProperty name="mybean" property="*"/>
and the bean's set method will be called for the value of that radio button.
so...
<input type="radio" name="doit"/>
class MyBean
public void setDoit( boolean yes )
//do whatever here
}

How to find the transaction code for the particular program or include

Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
Muralikrishna

HI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How to find the form name attached to AR Open item list

How to find the form name attached to AR Open item list
FBL5N -> Correspondance
Thanks
Ganesh

You can find out in SPRO.
Go to tcode SPRO
Financial Accounting (New)
Financial Accounting Basic Settings (New)
Correspondence
Define Form Name for Correspondence Print
Here you will find the form attached to the program.
To find the attached program to the Correspondence type.
Go to tcode SPRO
Financial Accounting (New)
Financial Accounting Basic Settings (New)
Correspondence
Assign programs for the Correspondence Types
Regards,
Naimesh Patel

How to find the Datasources for the given table names ?

Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
Srinivas

Hi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

How to find the characteristics assigned to a dimention

Similar Messages

Maybe you are looking for