How to find the codepage in system

hi team
i have an activity of unicode migration.
my current system is 4.7 Non unicode IDES.
I hve to do a combined upgrade and unicode migration to do from 4.7 IDES to NW 2004 IDES.
I have read few notes and guides where it says the process varries with MDMP, Single code page and blended code page.
I went to se16->TCPDB-> no entries occur.
Can you plz suggest heer how to move ahead as all notes mention about single code page, blended code page and MDMP.
Regards
Pooja

Hi Pooja,
1) Upgrade of an IDES system is not supported
2) Unicode conversion of an IDES system is not supported
With this info, are you really sure you want to do a CUUC with IDES ?
Best regards,
Nils Buerckel
SAP AG

Similar Messages

How to find the 1(one week) performance of the system

HI every one
in my recent interview he has asked this question
i have checked the sar options through man pages but i couldnt understand ...
can any one please tell me how to find the on week performance report of a system......
please tell me how i can find the performnace reports
Thanks in Advance

Hi.
crontab -l sys
Show, activated or not collecting of performance statistics.
man sa1
The shell script sa1, a variant of sadc, is used to collect
and store data in the binary file /var/adm/sa/sadd, where dd
is the current day.
So you need found file with correct date in /var/adm/sa
Regards.

How to find the Project and wbs Element System Status

Hi all,
How to find the Project and wbs Element System Status.
We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
Regards
Raghavendra

Hi,
try table <b>jest</b> with key = prps-objnr
Andreas

How to find the Version of CRM system

Hi All,
I have to install CRM system and I dont have any other information other than the EWA Report, Can any one let me know how to find the Version of CRM system and we dont have Java installed in it (Generally we check WEBCUIF but as we dont have Java I cannot see the Package). Can I go with the CRMUIF ?? .
I have Pasted the information of Support Package Maintenance, that is available in EWA Report.
BBPCRM
600
4
13
SAP BBPCRM Server
CRMUIF
600
4
17
SAPK-60004INCRMUIF
SAP CRM User Interface Framework
PI_BASIS
2005_1_700
16
26
SAP R/3 Basis Plug-In
SAP_ABA
700
16
29
SAP Application Basis
SAP_AP
700
13
29
SAP_BASIS
700
16
29
SAP Basis Component
SAP_BW
700
18
31
SAP Business Information Warehouse
ST-A/PI
01P_700
0
SAPKITAB7I
SAP Service Tools for Applications Plug-In
ST-PI
2008_1_700
6
8
SAP Solution Tools Plug-In
Please let me Know. Thanks in Advance.
Vijay

Hi,
Logically your Status bar should show that.
Login to gui. --> system -> Status
and then you should see the crm version in your Component version.
SAP CRM ABAP 6.0
You should go with
BBPCRM
600
Thanks
Rishi abrol

How to find the Source system table

Hi Experts,
How to find table name in SCM APO system, because I am getting error in process chain, the corresponding table in the source system does contain any data. check the data basis in the source system.
Please provide the solutions how to find the table in APO (DP scm bi).
Thanks in advance.
Bye,
Bharathi.

Hi
I guess you knew that in APO, apart from APO tables.. it is Livecache where the actual transaction data is stored.
But, if you just want to find some of the existing table in APO.. simply go to se11 and in the table name put the pattern as /SAPAPO/* and press F4. It will give a list of tables with the descriptions.
You can find out yourself all APO tables application wise with the following steps:
Use transaction SE11 or SE16
- Press F4 in the selection field
- You will get popup... in the below line of the popup selection SAP Applications.
Here you will get the Application list. In that select your own application for which you want to get the table details
e.g. SCM- Supply Chain Management --> SCM-APO --> Advanced Planning and Optimization --->SCM-APO-MD - Master Data --> /SAPAPO/00_PRODUCT
Here are some examples:
/SAPAPO/v_matloc - material, material number location view
/SAPAPO/TSAREAKO - Planning Area details
/SAPAPO/TSAREATE - Planning Area technial fields
Since there are thousands of tables, I cannot list them all here.
or
You can use transaction ST05 (database trace) to help you find the tables you are looking for. You can turn on the trace function, run an APO transaction, and looks at the ST05 logs for the tables

How to find the existing START ROUTINEs in Transfer Rules in whole system ?

Hi all,
   How to find the existing Start Routines in Transfer Rules in BW System, please ?
   I know that we could find from the Transfer Rules.
   Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.

Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k

How to find the System Dbtype in java code

How to find the System Dbtype in java code
I need various Db connection my project (oracle, sq l,sybase,db2),So How to find the System Dbtype in java code

Welcome to the Forums.
Please go through the FAQ of the Forum.
You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
Please try {forum:id=1050}.
Regards,

How to find the UWL work item types source system?

Hi Gurus,
How to find the Universal Work List work item types source system?
Thanks in Advance,
Dharani

Hi Dharani,
You can achieve this by personalizing the view for UWL.
Click on right side context menu of iView, click on personalize view
Here you will get list of Available Attributes not Displayed select System ID in that.
Save your settings and now you can see the task is from which system.
This will solve your problem.
Regards
Kedar Kulkarni
Reward points if useful

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

How to find the target system landscape

How to find the target system landscape - the clients present in the target system. Please explain in detail.
regards,
ravikiran

this FM is giving only the current system id. I want to find the target system details.

How to find the active workflows in the system

Hi,
we are going for upgrade, we want to find out the active workflows in the system
please guide me, how to find the active workflows in the system
is there any standard table to find the active workflows in the system
please suggest me the step by step process to find the active workflows.
thanks,
chandra

Welcome to the Forums.
Please go through the FAQ of the Forum.
You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
Please try {forum:id=1050}.
Regards,

Cannot find the Recv Logical system in Distribution Model

HI experts,
Im triying a Idoc to file scenario, the logical system for PI and R3 has been already created and assinged for the appropriate clients.
and i ve created the port from r3 using tcode we21 and in PI using idx1 and Idx2. The RFC destination also created for PI and R3 system.. when i created the distribution model using BD64 in R2. when i assigning message type i can give the source logical system and i cant find the Receiver logical system... Also in WE19 i cant find the receiver port (which i created in IDX1 and IDX2)..
Could u tell me how to solve this prob???
Regards
Balaji

Hii Ravi,
Thanks for your reply,
Yes i have created the port (RFC800) idx1 and give RFC destination which points the R3 system.
I have assigned the meta data to that port using tcode idx2.
And I have created port with port name "PORT800" in R3 using we21 and give the RFC destination which points the PI system
when im using the WE19... i gave source logical system as R3 Logical system and receiver logical system as PI Logical system.
now im getting error like "PORT RFC800 DOESNT EXIT IN THE THE TABLE OF PORT DISCRIPTIONS".
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number of records per months in cube

Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
Jimmy

Hi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
      tabname type dd02l-tabname,
      end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                    =
    FILENAME                        = 'c:records.xls'
    FILETYPE                        = 'ASC'
*   APPEND                          = ' '
    WRITE_FIELD_SEPARATOR           = ','
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
*   WK1_N_FORMAT                    = ' '
*   WK1_N_SIZE                      = ' '
*   WK1_T_FORMAT                    = ' '
*   WK1_T_SIZE                      = ' '
* IMPORTING
*   FILELENGTH                      =
TABLES
    DATA_TAB                        = itab1
*   FIELDNAMES                      =
* EXCEPTIONS
*   FILE_WRITE_ERROR                = 1
*   NO_BATCH                        = 2
*   GUI_REFUSE_FILETRANSFER         = 3
*   INVALID_TYPE                    = 4
*   NO_AUTHORITY                    = 5
*   UNKNOWN_ERROR                   = 6
*   HEADER_NOT_ALLOWED              = 7
*   SEPARATOR_NOT_ALLOWED           = 8
*   FILESIZE_NOT_ALLOWED            = 9
*   HEADER_TOO_LONG                 = 10
*   DP_ERROR_CREATE                 = 11
*   DP_ERROR_SEND                   = 12
*   DP_ERROR_WRITE                  = 13
*   UNKNOWN_DP_ERROR                = 14
*   ACCESS_DENIED                   = 15
*   DP_OUT_OF_MEMORY                = 16
*   DISK_FULL                       = 17
*   DP_TIMEOUT                      = 18
*   FILE_NOT_FOUND                  = 19
*   DATAPROVIDER_EXCEPTION          = 20
*   CONTROL_FLUSH_ERROR             = 21
*   OTHERS                          = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to find the codepage in system

Similar Messages

Maybe you are looking for