How to find the Coditional datasource in MM-PUR

Hi Expert,
I am trying to find the conditional datasource in MM-PUR(purchasing) module, i also search it on the Help.sap and sdn
but i am not getting the proper answer, please help me to find out the conditional datasource in MM-PUR and also tell me that,
how to identify that type of datasource.
Thanks and Regards
Lalit Kumar

Hi Tamkris
1. First go to help.sap.com and simply search for the datasource. You would come to a page where detailed description of the datasource is given.Just note that SAP sometimes plays spoilsport and for few Datassources it doesnt give the table names. But in your case for 0CO_OM_CCA_9, details are given.
2. If in some cases table names are not given, simply go to rsa3. open another session ST05. Activate the trace.In Rsa3, enter the datasource name. And then run extraction. Go to ST05 switch off the trace and then view the log.
In the log, all tables that are hit are shown
3. And if all this doesnt help, start debugging the datasource. TYpically these would be function module based. So dig in!
Hope this info helps
Prakash
Assigning points is a way of saying thanks on SDN!

Similar Messages

How to find the Infoobject name by Datasource .

Hi SAP Gurus
Can any of you guys suggest how to find the list of Info objects for the Datasources .
I have a scenario where I have a list of Datasources (400) which are Text and Attr Datasources,
for which I need find the list Info objects,
so can you please tell me is there any way that I can find the List of Info objects.
Thanks

Hi Rahul,
You can make use of RSOSFIELMAP for your requirement.
Go to Se16----->rsosfieldmap.
You can see several fields as selections among them you could find Info object and Field selections as well.
If you give infoobject name in selection, it will display all the data sources where it is available.
If you give Filed also it will display the same.
If you want to maintian document do Top Down Analysis from Bw stand right from Data target-->update rule--->infosource
Hope this helps
SujanR

How to find the Datasources for the given table names ?

Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
Srinivas

Hi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

How to find the tables of datasource

Hi
can anyone tell me how to find the tables from where the datasource is extracting data?
I have a datasource 0CO_PC_ACT_02 which i thought was extracting data from MBEW, but my MBEW table has only around 1000 records but while scheduling the data load of infopackage my PSA shows more than 4000 records.
How does this happen?
Thanx in advance
Sujai

Hi,
yes it is mainly MBEW as well as MBEWH (history of MBEW); in adition you have some article ledger data (table ckmlhd) from which some records could be added; MARV as well...
You can check in function module KKBW_XBEW_BW_GET_DATA_IS1 all the details.
hope this helps...
Olivier.

How to find the datasource of the planned ship date

Hi All,
how to find the datasource of the planned ship date in shipping history report , whether we go for enhancement or we can get from SAP Std. pls help me on step by step process.
Thanks and Regards
malempati

Hi Govardhan,
The best place to start looking for the standard data source will be http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm .
If you can not find anything, from the source table, find if the table is included in any of the structures/views for BW. Hope this helps.
Thanks and Regards
Subray Hegde

How to find the CRM related Tables form a Particular DataSource

Hi friends
           <b>How to find the CRM related Tables form a Particular DataSource
of BusinessContent.</b>
ex: i had taken CRM - DataSource ........ 0CRM_LEAD_H (Lead Header Data)
       for this DS i assign IS and extract data. But i want to Know from which
       CRM tables it was comming.
       ie ..I want to know the what tables linked to Datasource(0CRM_LEAD_H)
       How it has to check?

Just for your info, you can find as useful (for a methodology to solve this kind of issue) this weblog:
SAP BW and Business Content Datasources: in pursuit of the origins
Hope it helps!
Bye,
Roberto

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How to find the DB schema of XI DB tables to operate on the XI DB table

Hi all,
I have to execute some queries on internal XI DB. For this I need the schema name of the DB table where the data about the message is available. Can anyone tell, how to find the DB schema-name of the DB table? I have PI 7.1 system with internalDB.
How to access the DB of the PI 7.1 system using NWA?
Regards,
Soorya

Hi,
The PI 7.1 Server shall definitely posses a Database. This Database shall have the ABAP and Java Dictionary tables in 2 different database schemas.You sholud be getting the names of the schema from the basis team supporting your server.
I hope your are referring to the Java DB Schema for access. In order to get the schema name for the Java Dictionary, you should have access to the NetWeaver Adminstrator (NWA) of the PI Server.
Logon to NWA, navigate to Configuration Management --> Infrastructure --> Application Resources. Select the Resurce Type to show as JDBC Drivers. Select the system driver and click on Dependent JDBC Datasources. This table should give you the schema name of the Java Table Storage of the PI 7.1 server.
Regards,
Alka.

How to find the Data source name on linux server

Hello All,
Good Morning...
I created a rpd in my local machine and deployed on the server through Fusion middle ware.
and copied the catalog file there in the server.
While working on my local machine I have two odbc connections... one is for development and other is for production.
at the time of deployment to the server I changed the development instance to production instance throught the connection pool.
I am encountering the following error while working on the analyis....
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
I think this is because of the mismatch of the datasource name in server and my local machine...could you please tell me how to find the datasource names on the server?
Thanks!

Hi Dpka-
I created two ODBC connections in my system.
one for development and another for Production.
while deploying the rpd to the server I changed the development login credentials with production login.
The problem here is I just want to know whether Iam giving the same datasource name which was presented on the server or not.
I don't have access to the server now.
Is there any way to find out the datasource names which were presented on the server with the help of admin console?
Thanks!

How to find the Workbook statistics.

Hi Experts,
Can anyone please tell me how to find the Workbook statistics.
There are more 20 workbooks created from a single query. I want to find out the top 3 workbooks accessed frequently for 1 year.
Please provide your valuable inputs.
Thanks

Hi,
if statistics cubes are installed and getting loaded every day you can check following reports
0BWTC_C08_Q105
Business Content workbooks
0BWTC_C08_Q103
Business Content DataSources
0BWTC_C08_Q101
Business Content InfoCubes
0BWTC_C08_Q100
Business Content InfoObjects
0BWTC_C08_Q107
Business Content InfoSet queries
0BWTC_C08_Q106
Business Content InfoSets
0BWTC_C08_Q102
Business Content InfoSources
0BWTC_C08_Q104
Business Content ODS
0BWTC_C08_Q108
Business Content Queries
0BWTC_C10_Q014
Query Runtime
0BWTC_C10_Q251
Deleting Data in InfoCubes
0BWTC_C10_Q253
Deleting Data in InfoCubes - Detail, Times
0BWTC_C10_Q254
Deleting Data in InfoCubes - Details, Records
0BWTC_C10_Q252
Deleting Data in InfoCubes - Overview
0BWTC_C10_Q507
Average Time per Query
0BWTC_C10_Q021
Average Time per Query
Thanks and regards
Kiran

How to handle the Timestamp datasource while migration

Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
Shankar

Hello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira.

How to find the relevant extractor

Hi guys,
can anyone suggest how to find the relevant extractors for table ZZ0IHEDA and all its fields.
Thanks.
--Monica

Hi!
it looks like a custom created table. There will not be any extractor in business content available for extracting from custom table. you have to create generic datasource for this. You can use transaction RSO2. there is a how to called "how to generic delta" which explains the procedure for creating your own extractor on a table.
with regards
ashwin

How to find the required Data Source??

I have identified the requirement of Infocube 0CCA_C11..now how do I find the associated DataSource for the dataelements of the cube. Really appriciate all the help

Claudia,
There are a number of Datasources you could use. You could start with the infosource level. Explore Business Content. Ex:
0CO_OM_CCA_9
0CO_OM_CCA_1
It depends totally on your requirement: what fields you want, whether you delta functionality or not etc..
Importantly, whether you want actual costs, plan, commitments or budget.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/1f383fe58d5900e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/1f383fe58d5900e10000000a114084/frameset.htm
Hope this helps,
Farhan

How to find the tables

Could any one tell me how to find the tables for this Datasource 0GLACCEXT_T011_HIER and theExtract structure is ROHIEROS.But I did'nt see any fields on it.
In the Extract structure there is only one fields is OLTPSOURCE.
Could any one explain me how this hierarchy data get populated into BW. Its very urgent
Thanks in advance
Taj

http://help.sap.com/saphelp_bw33/helpdata/en/64/032de5ff014c4c86bc15272216a5e2/frameset.htm
table RFDT.. check the link
and also http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/6837bb0e954b7ab47aca5d9fce1101/frameset.htm
null

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

How to find the Coditional datasource in MM-PUR

Similar Messages

Maybe you are looking for