How to find the data flow in pipes
Hi All,
I am working on an existing created job which have the query that mapped to a input file from there it have a couple of Query transforms. After the second Query transform there are multiple Pipes with different query transform in which all of the querys are target to a error table and one pipe is target to a clean table.
I want to know how the data is flow into the clean table and error table. How to find the conditions saying which record needs to go into the clean table and which record needs to go into an error table.
Thanks
No such public document available from Oracle unless from Oracle Education.
for some specific operation you can check Process tab inside Oracle Application which shows the data flow as part for workflow process.
Regards
Prashant Pathak
Similar Messages
-
How to find the data flow for a given module.
Hi ,
Is there a way to find the data flow for a given module(Example AR,AP,......).
I mean are there any predefined document other than user guides that explains with data flow diagrams(including the tables involved).
Any help would be greatly appreciated.
Thanks & Regards,
Naveen.No such public document available from Oracle unless from Oracle Education.
for some specific operation you can check Process tab inside Oracle Application which shows the data flow as part for workflow process.
Regards
Prashant Pathak -
How to find the data loaded from r/3 to bw
hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u allHi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV -
How to find the Data Type of a column
Dear All,
How to find the Data Type of a Column dynamically in oracle Form.
Thanks and Regards,
Fazil
Edited by: user11334489 on Aug 25, 2012 9:06 PMhi,
you can use get_item_property built-in
eg:
declare
l_item VARCHAR2(10);
begin
l_item := Get_Item_Property('item_name',DATATYPE);
end; -
How to find the Date and Time of Modification of Column in aTable?
Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar MI agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime. -
How to automate the data flow to content servers?
We have ECC connected to CS. Could you help tell how to automate the data flow into the CS? Thanks a lot!
What do you use the Content Server for? If its for archiving you need to run the STORE job to send the data to the CS.
I can't see a reason to automate that process
Regards
Juan -
How to find the date my iPhone 4s was manufactured
Hi, Please can anyone tell me how to find the date my iPhone 4s 64gb was manufactured. I have the serial and i-m-e numbers. For some reason my Insurance company want to know, all I wanted to do was add the phone to my all risks policy. Thanks in advance for any advice.
That's all you will get, there is no way to know the manufactured date only the warranty status from date of original sale and it is most unlikely your warranty is still "good" on an iPhone 4
-
How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI
Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK -
How to find the Data source name on linux server
Hello All,
Good Morning...
I created a rpd in my local machine and deployed on the server through Fusion middle ware.
and copied the catalog file there in the server.
While working on my local machine I have two odbc connections... one is for development and other is for production.
at the time of deployment to the server I changed the development instance to production instance throught the connection pool.
I am encountering the following error while working on the analyis....
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
I think this is because of the mismatch of the datasource name in server and my local machine...could you please tell me how to find the datasource names on the server?
Thanks!Hi Dpka-
I created two ODBC connections in my system.
one for development and another for Production.
while deploying the rpd to the server I changed the development login credentials with production login.
The problem here is I just want to know whether Iam giving the same datasource name which was presented on the server or not.
I don't have access to the server now.
Is there any way to find out the datasource names which were presented on the server with the help of admin console?
Thanks! -
How to analyse the date flow diagram
hi guys,
my question is how to analyse in detail the data flow diagrams and functional and technical spes. how can i understant in detail.
regards,
manjuHi,
Data flow diagram will show you the flow of the data from the Source System till the data target. It will give you the details of the Data Source, Info Source and Info Provider etc...
Functional Spec gives you the requirement of your company, I mean the fields they need for a particular reports and tables they have used etc... All you have to do is compare the fields you have in your data sources and finout which fields need to be added to the data sources or do you need to go for a new custom data source etc.. and prepare a Gap analysis Document. When You put the details of the data sources till the Info Provider I mean the TRs and URs etc.. in a document it becomes your Tech Spec.
Hope it helps... -
How to find the date of Division creation in org structure
Dear Gurus
I want to know how to find the sales division creation date in organisation structure
Regards
AnandHi,
I checked it in my system and it is working.
Please go to SPROEnterprise strDefinition-Log General-Define.......Division-
Here go to the screen where the division can be created.
In this screen, go to the menu Utilities---Change logs. Now select a date range and then execute. You will get all the creations/changes done.
Ensure that you do this in your golden client where your configurations are done and not in any other systems. If this area is not enabled for logging, then again you cant see this history. -
How to find the date when entries were made in DEVACCESS table
Hi All,
I needed to know if there is a way to find the date when an a developer was registered in our SAP system.
I can see in DEVACCESS table (in SE16) all users registered along with their developer key but i also need to see when those entries were made. Can you please help in this.
Regards,
Ashish RobinsonHi all,
Thanks for the replies but my issue is that I got only for some users from SCCR in service maketplace. It seems that that other users for which (i can see entries in table DEVACCESS in my system) were created with somne other s-user which we dont know at thsi time so finding from service marketplace is not working!
I needed to know iff there is some way i could get this information (when entries went in table or when the users registered) from SAP itself.... or may be from oracle sql level.
Thanks to suggest <removed by moderator>
Regards,
Ashish Robinson
Edited by: Thomas Zloch on Nov 23, 2010 2:28 PM - priority normalised -
How to find the dates table in T.CODE:CRMD_ORDER
Hi ,
Where to find the dates at sales order header level (General tab)as well item level in Transaction code: CRMD_ORDER.
I did not see any internal table for this Dates in the FM CRM_ORDER_READ and i have tried with F1 help but is a ALV grid.
Could any one help me to find the dates table.Hi,
The dates are populated in the table IT_APPOINTMENT of FM CRM_ORDER_READ.
if you want to populate the dates in any business order in crmd_order, then u can put a debugger in FM 'CRM_ORDER_MAINTAIN', open any business order, populate the date at header and item level and press enter.
check the table IT_APPOINMENT table and the corresponding values that need to be populated.
Hope this helps!!!
Prerna -
How to find the date when the users has been created in Hyperion Essbase
Please let me know, if there is any option or way to find the date when the users has been created in Hyperion.
Essbase - 9.3.1.0.0
Sun Solaris SPARC (32-bit) - 5.8
If not in Hyperion, could you please let me know if it gets stored in the repository. If yes, please let me know the table name in Oracle.I don't know of a way of getting this information from Shared Services via the standard web UI. However you can see when a native user was created in openLDAP. If your users are all native then you can use an ldap browser to view the CreateTimestamp.
Port: 58089
User DN:CN=911,ou=People,dc=css,dc=hyperion,dc=com
Password: Your shared services admin user password
You should see each new native user under the ou=People and each CN will have a create timestamp.
I can't help if all you users are external or your using the old Essbase native security.
Gee -
How to Find the Data Type of the Field In a Database Table
Hi Experts,
I'm currently working on a program which needs to find out the data type of the given field in a database table. In addition to accessing DD03L directly, is there any other workaround such as function module to help me achieve this? It would be helpful if a demo example could be provided.
Thanks a lot.Hi,
Use this..
DESCRIBE FIELD dobj TYPE typ.
write typ.
type will contain the data type of the object.
and check this thread also....
Re: How to get datatype of fields in dynamic structures
Cheers,
Simha.
Reward all the helpful answers..
Maybe you are looking for
-
When I try to play a song on iTunes, it won't play. Tt says it's playing but it never plays on past the 0:00 mark. It even does this for music I have recently bought on iTunes and my music works fine on my iPhone but not on iTunes. I haven't had this
-
How to Increase the Length of Condition table in OV20
While creating a condition table in T.code OV20 if fields length is more that 50 bytes table is not getting generated.it gives error as Too Many Fields Selected(More than 50 Bytes). Actually i need to create a tabel with Basic Material(WRKST) which h
-
JFrame resizing setUndecorated(true)
I have a JFrame that it's title bar has several Images. In Order to set these images I used setUndecorated(true) and added the images with panels to the north area of the panel. After this change my Frame has a fixed size. I implementes MouseListener
-
After I open and read an email using my mail app, how do I get back to the email app to open an read others. I am closing the email open, going back to the home screen and reopening the mail app every time. There's got to be a better way to do this
-
Hello, I know this question has been asked many times - but I wan't to post this again and see if I have missed something. I am so frustrated with not being able to accept meeting invites from Outlook users when they send me a meeting invite as a .ic