How to find the Databse field used in which Transaction

Hi,
I have one query about:
How to find the particular field from the Database table, used in which transaction?
Bottomline: I want to find the LIKP- LIFEX field, used in which Transaction. I know it is related to inbound delivery, but i couldn't find it in which transaction it is.
Thanks in advance.
Jai.

Hi Jai,
The field is called External ID which equal to LIKP-LIFEX or RV50A-VERUR_LA (structure).
Path:
Goto -> Header -> Administration -> External ID.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Similar Messages

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

How to find the structure fields data in database tables?

how to find the structure fields data in database tables?

Your question doesn't appear to be Web Dynpro ABAP related. Please only post questions in this forum if they are directly Web Dynpro ABAP related. There are several other more general ABAP related forums.

How to find the NodeManager Status using WLST

Hi All,
can anyone please let me know how to find the nodemanager status using wlst, the nodemanager status whether it is 'Reachable' or not.
Thank you.

Hi Bob,
As James pointed, we faced the same. We could not find any mbean to find the Node Manager Stat that we can monitor from Weblogic console.
The best I can suggest, use the below WLST command after connecting to 'Node Manager:
nm()
Currently connected to Node Manager to monitor the domain xxxdomain.Grep for 'connected to Node Manager to monitor the domain <Your WLS domain name>' and if successfull, your node manager is UP & Connected other wise not 'Reachable'.
Regards,
qumar

How to find the db accounts using default passwords in oracle 10g

Hi, can someone pleas tell me , how to find the oracle accounts in the database which are using default passwords. DB verion is 10g and 9i.
in 11g version we can query the view DBA_USERS_WITH_DEFPWD to view the users....
any idea in 10g and 9i ?
thanks in advance.

951658 wrote:
Hi, can someone pleas tell me , how to find the oracle accounts in the database which are using default passwords. DB verion is 10g and 9i.
in 11g version we can query the view DBA_USERS_WITH_DEFPWD to view the users....
any idea in 10g and 9i ?
thanks in advance.the only way I've found is to search the web for lists of default users and their passwords, then attempt to log on with said credentials. I'd start with Pete Finnigan's site (google is your friend). He may already have some scripts ready to go, or at least the lists you'd need to get started.

How to find the absolute path of file which store in KM foler ?

Hello everyone:
     We want to develop an ABAP program which can write files into KM folder directly.
     So I need to find the absolute path of file which store in KM folder first, then we can consider the develop solution.
     Is this issue possbile that an ABAP program write files into KM folder directly ?
     Is there anybody had done this job ?
Best Regards,
Jianguo Chen

Hi,
http://forum.java.sun.com/thread.jsp?forum=34&thread=36
612The methods in the above topic seem to be available when use a DOM parser..

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

How to find the glyphs character using js in indesign cs2?

i want to find whether the glyphs character(registered trademark symbol)is applied with character style superscript or not, i cant able to fix the glyphs character in the find preference, how to do it?
thanks
subha

You are mixing two concepts. There is a
i major
difference between a
b glyph
and a
b character.
A glyph is any singular graphic in a font.
A character is an instance of a character set (in InDesign, and in Mac OS X, it's the Unicode set; older programs use 'code pages' to translate codes into characters). [*]
Why are they different? Well, a ligature ('ffi', for example) is not a single character, containing the characters 'f', 'f', and 'i'. It
i is
a single glyph in most fonts, but (usually!) you cannot insert an 'ffi' directly. Programs that do allow insertion of glyphs (again, such as InDesign) are also smart enough to decompose it into single characters 'f', 'f', and 'i' again.
Why is this distinction important? In CS2, you can search for
i characters
but not for
i glyphs
(in CS3 and higher you can, but you cannot specify "+superscript").
All aside, you can insert a trademark character directly into InDesign by calling up the Glyphs :-) panel and double-click the glyph. (It works because the 'TM' is also a valid Unicode character.) Then just cut it, and paste into the 'Find' field of the Find Text box. Alternatively, since you can see the Unicode value in the Glyphs panel, you can enter the Unicode directly into the search field, surrounded by less-greater than: < 2122 > (without the spaces). This works for all Unicode characters.
Even better is that the character is also in the Find drop down menu -- "Registered Trademark Symbol". This inserts the shortcut "^r" in the Find box -- but it only works for a selected set of characters.
Since this is the Scripting forum, I'm guessing you want to use this in a script. Well, both "< 2212 >", and "^r" can be used in the search string to specify the character. Do the search and examine for each found item if it has a position Superscript or not.
[*] Post-edit: to expand a bit more, a table in the font associates Unicodes (character values) with glyphs, not the other way around. Every Unicode character available in the font associates to at least one single glyph. There may be more Unicodes than glyphs in a font (there is no law against associating more than one Unicode to a glyph -- for instance, both 'space' and 'non-breaking space' point to a single space glyph), and there may also be more glyphs than Unicodes (the 'ffi' glyph has a Unicode value -- now considered an early error in the Unicode definition! -- but the 'Th' glyph does not). Most programs only allow Unicode characters in text.

How to find the Acoount Group used while creating the customer master data.

Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.

Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil

How to find the Apple IDs used on a device?

I travel extresnively and have created muiltiple Apple IDs in order to be able to download apps that are only available in specific Apple Stores. For instance my US Apple ID won't let me download NFL Game Pass so I have an Apple ID for Singapore that I've used for that. Besides Apple IDs in a few countries I also have some apps that my sons purchased. Now I have a new app that I need for work from a European Apple Store. I downloaded it to my computer but I can't install it on my iPhone becasue it has already been authorized for 5 different Apple IDs.
1) How can I find out which AppleIDs are authorized on a specific iPhone?
2) How can I see a list of which apps are associated with which Apple IDs either on the iPhone or on the computer in iTunes?
3) How can I unauthorize a specific AppleID on the phone to regain a free slot?

I used the query below to get the RMAN backup details, here I am missing detail of compression algorithm
SELECT SESSION_KEY, INPUT_TYPE, STATUS,
TO_CHAR(START_TIME,'mm/dd/yy hh24:mi') start_time,
TO_CHAR(END_TIME,'mm/dd/yy hh24:mi') end_time,
ELAPSED_SECONDS/3600 hrs,
COMPRESSION_RATIO ,
INPUT_BYTES_DISPLAY, OUTPUT_BYTES_DISPLAY, TIME_TAKEN_DISPLAY
FROM V$RMAN_BACKUP_JOB_DETAILS
ORDER BY SESSION_KEY;Output
SESSION_KEY     INPUT_TYPE     STATUS     START_TIME     END_TIME     HRS     COMPRESSION_RATIO     INPUT_BYTE     OUTPUT_BYTES_DI     TIME_TAKEN_DISP
417     DB INCR     COMPLETED     8/23/2012 16:01     8/23/2012 16:33     0.529444444     1.06917899     244.67G     228.84G     0:31:46
423     DB INCR     COMPLETED     8/23/2012 16:43     8/23/2012 17:14     0.510277778     1.0692043     244.59G     228.76G     0:30:37
435     DB INCR     COMPLETED     8/24/2012 11:39     8/24/2012 12:13     0.571666667     1.06899247     244.64G     228.85G     0:34:18
441     DB INCR     COMPLETED     8/24/2012 13:52     8/24/2012 14:23     0.511666667     1.0690053     244.60G     228.81G     0:30:42
447     DB INCR     COMPLETED     8/24/2012 16:30     8/24/2012 16:58     0.467222222     2609.07178     244.60G     96.00M     0:28:02
457     DB INCR     COMPLETED     8/25/2012 12:30     8/25/2012 13:01     0.527222222     1.06896188     244.68G     228.90G     0:31:38
467     DB INCR     COMPLETED     8/26/2012 16:30     8/26/2012 16:56     0.4325     739.556573     244.65G     338.75M     0:25:57On the output I need to have the compression algorithm used for each backup.
Hope this is crystal clear now.

How to find the serial number used during Goods receipt

Hi ,
Have used serial numbers whle doing GR, but cannot find the table where the serila numbers are stored.
table ser01 contains the material document and the serialization procedure. I want to find a table where the serial numbers that I have used for the GR, are store. I want to retrieve them and send them in an interface.
Rgds
Sumendra

Hi
Function Module GET_SERNOS_OF_DOCUMENT can be used to retrieve serial numbers corresponding to any of the following documents.
Material document
Physical Inventory document
Import parameters:
Input parameters which needs to be passed changes based on the type of document.
Following are required fields to be passed as input parameters to get respective document serial numbers
3. Material document
KEYDATA-TASER = 'SER03'
KEYDATA-MBLNR - Material Document
KEYDATA-MJAHR - Material Document Year (optional)
KEYDATA-ZEILE - Item of Material document(optional)
7. Physical Inventory document
KEYDATA-TASER = 'SER07'
KEYDATA-IBLNR -Physical Inventory document
Output table:
Serial Number details are retreived in the following table
SERNOS
Serial numbers can be extracted from field SERNOS-SERNR
regards
Prashanth
Edited by: Prashanth@SD on Nov 3, 2010 6:20 AM

How to find the corrupted files using javascript?

Hi all,
I need to run batch of files some of which were corrupted?? instead of using the method "the files which were not opened are corrupted" is there any way to find the corrupted files??
I need to find this using javascript or apple script??
Please some one help me..
Regards,
subha

We found one datafile has corrupted by using dbv.dbv would have reported the block ids (block numbers) that are corrupted.
query dba_extents to identify the segments that contain such blocks.

How to find the DB tables used by the workbook/worksheet

Hi,
I wonder if there is a way that we can query the EUL tables (e.g. eul5_documents, etc) to find out the database tables that are used by a specific workbook.
Please advise and thank you very much,
Yke

There is no "direct" way to do this. If a report has been run at least once, though, you may be able to find out what you want (but it will require a bit of work).
From the EUL5_QPP_STATS table, you can find the workbook (qs_doc_name) and worksheet (qs_doc_details). You can then use the qs_object_use_key value to find the objects, which will give the tables. You could try:
select obj_ext_owner || '.' || sobj_ext_table
from eul5_objs
where instr ((select qs_object_use_key
                from eul5_qpp_stats
               where qs_doc_name = <workbook>
                 and qs_doc_details = <worksheet>
                 and qs_created_date =
                    (select max(qs_created_date)
                       from eul5_qpp_stats
                      where qs_doc_name = <workbook>
                        and qs_doc_details = <worksheet>)),
             obj_id) > 0;This should give you the tables used for the last execution of the workbook.

How to find the Databse field used in which Transaction

Similar Messages

Maybe you are looking for