How to find the Delta Linked iView's Origin ?

Hello all,
How r u ?
We found some new Delta Linked iViews in the Workset, but these iViews are not available in the Portal Content under the mentioned Folder. How do we find the origin of that iView ?
Best Regards....
Sankar Kumar
+91 98403 47141

Hi Maran,
Please follow these,
Content Admin -> Open your Workset.
Now your workset will display names of the iView that assiged to that workset.
If the iview is copied without delta link means that will mentioned as<b> (changed)</b> near by the iView Name.
   Example: Content Admin -> Open your Workset Object
         <MyWorkSet>
> MyiView1
> MyiView2(changed)    [This means this iView copied w.o Deltalink)
> MyiView3
Here MyiView1,MyiView3 are deltalinked iViews.
Regards,
<b>Ramganesan K</b>

Similar Messages

How To Find The Delta Queue Table

Hi All,
Can anybody guide me, how and where can we find the table for the delta queue.
Regards
rahul
Message was edited by: rahul kharya

Hi Rahul,
You can find the delta queue in RSA7.
Check this post:
Delta Queue
Bye
Dinesh

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to find the link between strcture and query technical name

Hi Guru's
How to find the link between Strcture in the query and query technical name. In other way where used list of the structure used in queries?
I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
Please can anyone help me?
Regards,
Sirisha

Hi ,
For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
Thanks,
Amit

My bookmark pull down menu doesn't offer " manage bookmarks". In all the support Ican find this is how to edit bookmarks. How do I find the manage link if it's not in teh pulldown menu?

Question
My bookmark pull down menu doesn't offer " manage bookmarks". In all the support I can find this is how to edit bookmarks. How do I find the manage link if it's not in the pull-down menu?

In Firefox 4, "Organize Bookmarks" has been changed to "Show All Bookmarks" to open the Library window.

Why editing iview id break the delta link in the portal page?

For some reason, everytime I edit the iview id, the delta link in the page will be broken.
After I changed the iview id, the iview id that I added as delta link in portal page remain same, and seems like become a separate copy , rather than the original delta link.
This frustracted me as I have to remove the old iview , and add the new edited iview into the page again.
Why is this happen? (I am very sure I didn't accidentally add the iview as copy, instead of delta link)
By the way, I am in NW04s SP9.
Thanks for help.
Kent

Hi Kent,
> (I am very sure I didn't accidentally
> add the iview as copy, instead of delta link)
The wording "I am very sure" points to the fact that you didn't really check and re-try it?!
I just checked it on NW04 / SPS18 (which corresponds to SP09 on NW2004s) - and it works like a charme. The delta-link on the test page points to the new ID (as the ID-Change-Wizard announces it).
As I have no 2004s installation at hand, I would suggest really to re-check if you are really talking of a delta-link. If it really doesn't work on SP09 while it works on SP18 in parallel, you would have to open an OSS message. Anyhow, this really should behave analogously...
Hope it helps
Detlev

How to find the ABAP Webdynpro Component Name in the Portal IView(WDA)

Hi All
I got one ABAP Webdynpro IView in portal , when i opened the Iview i got the Application name of ABAP Webdynpro in the properties of the Iview but i could not able to find the component name .
Please let me know how to find the component name of WDA , as i already got the Application name of component from Iview i.e WDA_ED_RDF ( this is applicaiton name found in the portal Iview for ABAP Webdynpro)
Please get back to me on the same , it would be great help to me.
Thanks,
PortalUser100
Edited by: PortalUser100 on Mar 24, 2011 11:51 PM

Hi
Right Click on any UI Element in Portal->Go to more field help->TEchical Information. You can see all the information about component, application, ui elements etc.
Please check this... may helps more
http://wiki.sdn.sap.com/wiki/display/WDABAP/GeneralTechnicalAspects
Thanks,
Venkat.

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello there, g0ddess.
The following link proves to be a great resource to get started with Apple Training and Certification:
Training and Certification
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to find the count of attachments done before submit in Attachment Link?

How to find the count of attachments done before submit in Attachment Link?
Does anybody know how to find the count of attachments done in Attachment Link item type before Submit.
My requiremet is to display the count of attachments done by user used in Standard Page before he submits the page.
Any help would be appreciated.
Thanks.
CO.java
OAMessageAttachmentLinkBean oalink = (OAMessageAttachmentLinkBean)webBean.findChildRecursive("Attachments");
oalink. count ?

I have the same issues! any body can help this issues?

Muse Accordion widgit, I need to know how I find the (Open Closed ) link it seems to have vanished

Muse Accordion widgit, I need to know how I find the (Open Closed ) link it seems to have vanished all I can find is ( Expand behavior and Overlap Items Below.)

If I got your query right, do you mean you don't have all the options in the Accordion Options panel as pictured below?
If the above is true, can you try re-inserting the Accordion panel and check if the options then become available for you. Also, please check if you're running the latest version of Muse i.e. 4.1.8 as on today.
If the problem persists, please try creating a new Muse project and see if you are able to replicate the behaviour on a fresh Muse site as well.
Thanks,
Vinayak

How to find the Database OEM link?

How to find the database OEM where oracle server is installed?
for example
http://cccmc67435.ad.company.com:1158/em
How to find the port number and the domain name? Please guide

Please check in emd.properties file located at $ORACLE_HOME/<Hostname_SID>/sysman/config
cat emd.properties|grep REPOSITORY_URL
REPOSITORY_URL=http://Hostname.us.oracle.com:1158/em/
Regards
jagan
Message was edited by:
user570368

How to retrieve the type of iView?

Hi Experts,
I would have a simple question, I have an ivew on my portal, but I am not able to find the type of this iview. I need the name of the iview template like WebDynpro, Transaction, BW, URL, Query ect.
Thanks,
Levente

If you want to find the type of the iView from the code you can use the API which is described in the following document.
<https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401>
But I guess, you should be knowing the type of the iView using the Delta Link Tracer. Atleast I am able to see that.
Sudhir
Reward with points if useful

How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

How to find the Delta Linked iView's Origin ?

Similar Messages

Maybe you are looking for