How to find the Different entries of the characters.

HI Gurus,
i have two characters in the Cube, for these two characters text is same for some records and different for some records. My requirement i need to find out the records whose text values are different for these two characters. I need to find out these records in the report level. Please guide me the way to find out a solution for this issue.
Thank you very much in advance
James
Message was edited by:
james winslet

Hi ,
I want the Report like this.
TransactionID--Usersite-Custsales
10001--newyork1newyork2
10002--newyork3newyork5.
10003--newyork6newyork6.
In above report I Do not want the 3rd row because in that one the two characteristics text's are equal.
I want the final report as
TransactionID--Usersite-Custsales
10001--newyork1newyork2
10002--newyork3newyork5.
Thanks,
James

Similar Messages

How do I remove unwanted entries in the Profile Manager window?

Can anyone please explain how do you remove irrelevant entries in the Profile Manager dialog? Since I have both 4.0 and 3.6 installed,each with two profiles,I use to launch secondary profiles with the Profile Manager via a command line instead of a specific shortcut,and the dialog window always shows all four options,regardless of what path I enter : is it possible to clean up the dialog window,so that only the 4.0 profiles are displayed when entering the path to 4.0 profiles,and so on for 3.6,without actually risking to delete any profiles? BTW,4.0 profile folders are stored in a different directory than 3.6,and the 3.6 profiles were accessed with the Profile Manager window (no shortcuts to specific profiles at the time) before installing 4.0

The Profile Manager is for all versions of Firefox you have installed - every Profile that is listed in the '''profiles.ini''' file will appear there. The location of the Profile folders has no effect on what the Profile Manager dialog window shows. There is no way to set it up relative to one program installation.
Best thing to do is to have separate desktop shortcuts for each Profile / Firefox-version you want to use.
http://kb.mozillazine.org/Shortcut_to_a_specific_profile

How do I add an entry to the auto correct spell check dictionary?

How do I add an entry to the auto-correct dictionary for spell check?

The suggestion from Encrypted11 is for adding a keyboard shortcut, if that is what you want to do. If you want to add a custom word to the keyboard dictionary ....
The iPad Dictionary
The iPad has a dictionary built in. As you type, it compares what you've typed against the words in that dictionary. If it finds a partial match, it displays a suggestion just beneath what you have typed.
If you accept the suggestion by tapping the Space or full stop, great.
If you allow the 'mistake' to stand, the second time you type the same word and reject the correction, iPad adds the new word to its custom, dynamic dictionary. From now on, it will accept the new word and will even suggest it the next time you type something like it.
That is copied from here.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-keyboard-tips-tricks.php

Outlook-2 different entries for the same person (but not the same email)

i was asked to switch from outlook 2007 to outlook 2013 as a trial.
For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
I switched back to Outlook 2007 and the issue is still the same.
any suggestions?

I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
To fix this:
Open the message and double click the address and view source
Just replace the generated Display As with the Display As you want
Thanks,
Ethan Hua CHN
TechNet Community Support

How can I make different catalogs from the same image

How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.

Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia

How to find out which type of the driver is used in our application?

Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
Phoeniox

Hi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
               for(int i=0;i<drivers.size();i++)
                    Driver driver = (Driver)drivers.get(i);
                    String driverName = driver.getClass().getName();
                    System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath

How to find out who has deleted the production Query

Hi All,
I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
Please let me know is there any possiblity to kow
How to find out who has deleted the production Query
Awaiting for your replies.
cheers

Hi Mahesh and all,
Thanks for all your inputs.
I have tried with RSRREPDIR tabel , I am unable to see that query at all.
If I use theT-code SLG1,
please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
OR
could you please suggest any other way.
cheers
leena

How to find out who had deleted the function moldule? S O S

how to find out who had deleted the function moldule Thank you very much.

if this fm was assigned to device class (package) you'll find it in
tables tadir, e070, e071
try with name of function module or function group
hope that helps
Andreas

How do you stack different photos in the editor layers pallet

How do you stack different photos in the editor layers pallet? I can get different photos in the editor, but I cannot figure out how to get different photos into the layers pallet at the same time. Please help!!!!!

Just to clarify, you can never see the layers panel for more than one photo at a time. The suggestions you got will show all the photos, but because they are now combined as layers in one image.
If you want to see more photos in the editor at once, go to the preferences>general and turn on Allow Floating Documents, then go to Window>Images>Float all in windows, then Cascade or Tile.
But you will still only see the layers panel for the image that is active at the moment.

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps..

How to create a different sid in the same system

Hi Experts
In one system already i have installed HP Quality center with Oracle, Now i want to install SAP on the same system. Please help me how to create a different SID on the same system.
Thanks in advance

Hi,
If you are talking about host...then when you will start installation of new system it ask for SID then choose different SID...
Thanks
Sunny

How to retrive the deleted entries in the ztable

please let me know how to retrive the deleted entries in the ztable.

>
Naseer uddin wrote:
> Hi,
>
> While creating a table have u activated the buffering (full).
> if not then it is not possible to retrive the lost data, and if u have activated the full buffering of table then it is possible to retrive data, up to some extent, using transaction Code se14.
Complete Nonsense.*
buffering doesn't mean that it will buffer the records back in database ,once you deleted.it means it will allow the buffer the table to memory only while read access.

How to find last inserted record in the table.

Version: Oracle 10g
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".
As i come to know that Rowid is not result perfect results. Please provide your inputs.

user13416294 wrote:
Version: Oracle 10gThat is not a version. That is a product name. A version is 10.1.0.2 or 10.2.0.4, etc.
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".Not possible as your data model does not cater for it. That simple.
If there is a need to determine some order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or more attributes are needed to represent that information. Thus your data model in this case is unable to meet your requirements.
If the requirements are valid, fix the data model. In other words - your question has nothing to do with Oracle and nothing to do with rowid, rowscn or other pseudo columns in Oracle. It is a pure data modeling issue. Nothing more.

How to find which function module write the relevant idoctype?

Dear All,
how to find which function module write the relevant idoctype?

Hi,
Generally the function modules of the idoc types are having a naming convention as IDOC_INPUT for inbound processing and IDOC_OUTPUT for outbound processing followed by the idoc type name
for example : For IDOC type ORDERS
the inbound function module will be IDOC_INPUT_ORDERS and for outbound IDOC_OUTPUT_ORDERSP
In this way you can find the function module for a particular IDOC
P.S: Hope this is what you have asked for
Regards
Sarves

How to find user exit implemented in the program

how to find user exit implemented in the program or standerd transaction

try this program to get the list of all the user exits for a transaction...
*& Report Z_USER_EXIT                                                 *
*REPORT Z_USER_EXIT                             .
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
           tadir,    "Directory of Repository Objects
           modsapt, "SAP Enhancements - Short Texts
           modact,   "Modifications
           trdir,    "System table TRDIR
           tfdir,    "Function Module
           enlfdir, "Additional Attributes for Function Modules
           tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
    SELECT SINGLE * FROM tstc
      WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir
         WHERE pgmid    = 'R3TR'
           AND object   = 'PROG'
           AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir
           WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir
            WHERE pgmid    = 'R3TR'
              AND object   = 'FUGR'
              AND obj_name = enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
Find SAP Modifactions
      SELECT * FROM tadir
        INTO TABLE jtab
        WHERE pgmid    = 'R3TR'
          AND object   = 'SMOD'
          AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
          AND tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
      20(20) p_tcode,
      45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
        2 'Exit Name',
        21 sy-vline ,
        22 'Description',
        95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
          WHERE sprsl = sy-langu AND
          name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
          2 jtab-obj_name HOTSPOT ON,
          21 sy-vline ,
          22 modsapt-modtext,
          95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

How to find the Different entries of the characters.

Similar Messages

Maybe you are looking for