How to find the error message populating for infotype 2001 iN pa30

Hi ,
I got a requirement that one of our end user a a error message is populating when he tries to enter the data in 2001 absences infotype.
I check the documents ...it is written as a there is long back they modified the original T-code of 2001(report or userexit not sure) to allow only HR Department people , no one can enter the details apart from HR ,no-one else should be able to do that!!
Now i need to find where the error message is getting .............i dont know what is the best approach,
i debugged it(before savgin) but its too long to find......I put the break points for the user-exits available for the infotype(Total i found 16 Package PTIM) ......no user-exit is triggerring..i searching from morning....
The main problem is it is working fine for me.I am not getting error message...so unable to catch
Please help me how to search...or need to search with 'AUTH ' field? if so in how many programs?
or need to search using the 'MESSAGE' i just have the screen shot of the message..with the content how could i found that ??
waiting for your valuable inputs....
regards
sas

Hi Gautam,
Thanks for reverting back, but my problem is i am not getting error message!!
enduser is getting that!!
Rgars
sas

Similar Messages

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

How to Customize the Error Message when a user enters a wrong password

Hi Gurus
Pls Help out me that
How to Customize the Error Message when a user enters a wrong password ?
I need the Help to Customize the messege ?
How we can do
Pls Tell me indetail

Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
The file you need is actually a portal .par file and can be found in the deployment/pcd directory. The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time).
You need to copy this file to a local machine and unzip the contents. The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar. It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
In this file you will find lines like:
NUMERIC_REQUIRED=Invalid new password (must contain digits)
You need to identify which texts you wish to modify and edit the text to the right of the equals sign. Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension. Then logon to the portal and upload the new par and you should see your new logon messages.
Haydn

TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

how to fix the error message itunes can't sync apps because it can't determine what apps are installed

Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Please help me how concatenate all the error messages and send it as out parameter value.

Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.

Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them.

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
This question was solved.
View Solution.

Hi,
From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to End the Error message: "enter the password for the exchange account"

i completed configure Exchange Account on my iPhone, but still show the error message: "enter the password for the exchange account"

make sure you don't have 2 step verification in gmail.
otherwise you need to follow
Signing in using application-specific passwords
The codes that you’ll get with 2-step verification don’t work with all applications. There are a few applications that use information from your Google Account (like the Gmail application on your phone, or Outlook) that require another type of code. These are called application-specific passwords.
Some devices and applications that use these special passwords include:
POP and IMAP email clients such as Outlook, Mail and Thunderbird
Gmail and Google Calendar on smartphones
ActiveSync for Windows Mobile and iPhone
YouTube Mobile on Apple devices
Cloud Print
Installed chat clients such as Google Talk and Adium
3D Warehouse, Sketchup, and installed applications
AdWords Editor
Sync for Google Chrome
Gmail Notifier
How to generate an application-specific password
Unlike a verification code that you receive from your phone or through Google Authenticator, application-specific passwords are generated. You don’t have to memorize them, ever - you simply generate a new one each time you need to sign into a particular application. Follow the steps below to generate your application-specific password:
Visit the Authorizing applications & sites page (pictured below) under your Google Account settings.
Under the Application-specific passwords section, enter a descriptive name for the application (label 1) you want to authorize, such as "AdWords Editor – Desktop," then click “Generate application-specific password" (label 2).
You'll then see the application-specific password you just created (3). You'll also see the name you wrote in for the device (4) and a link to Revoke (5) -- or cancel -- the code.
Once you click Done, you’ll never see that application-specific code again. But don't panic: You can generate a new one whenever you’re prompted for an application-specific password by a non-browser device or application -- even a device or application you’ve authorized before.
Using application-specific passwords
When prompted for a password when you sign in to a non-browser application or device that accesses your Google Account:
Enter your username.
Enter your application-specific password in the password field.
If your application has an option to remember your application-specific password or stay signed in, you can select that option so you won’t have to generate and enter a new application-specific password each time you access your account from this application or device.

How to find the error message populating for infotype 2001 iN pa30

Similar Messages

Maybe you are looking for