How to find the first occurrence of a string2 in string1

Hello
I've got a string, and I want to know where '-' occurs
the first time. I mean, in 'hello-world', the first
one is position 5.
In C++, I've got:
Result = strcspn(string1, string2);
How can I do it in Java?
Thank you very much.

String.indexOf()...read the API.

Similar Messages

How to find the First block....in a multi block form

hi
How i can find which is the first block in a multi block form....
( there are n number of forms with multi blocks...so
i need to generalise the code to find the first block in all of
the forms)
regards
Kris

If you searched in the on-line help for "First", you would find that the Get_Form_Property built-in provides two: First_Block and First_Navigation_Block.

How to find the First Modified record

Hi,
I have one table with the fields ID, branch and modified_date.
here nothing is unique. How can I modify a record with new
branch name of a perticular id(will have multiple) where
modified date is oldest.
here date is time stamp.
Though I created with date and time it is showing only date not
time when I query.
Ex:
1, Eng, 10-10-1999 10:10:10('mm-dd-yyyy hh:mi:ss')
1, Mat, 10-10-1999 10:10:09
is there any way to get this (1, Mat, 10-10-1999 10:10:09)
record.
Thanks in advance,
Srini.

There are a few ways to do this ...
i) Start by writing code to identify the lowest modified_date
for each ID ...
select ID, min(modified_date)
from my_table group by ID
Then, since the result of a query is logically the same as a
table, you could do either ...
select * from my_table where (ID, modified_date) in
select ID, min(modified_date)
from my_table group by ID
... or ...
select t1.ID, t1.branch, t1.modified_date
from my_table t1,
select ID, min(modified_date) min_modified_date
from my_table group by ID
) t2
where t1.ID = t2.ID and t1.modified_date =
t2.min_modified_date
ii) You could create the requirement that no lower
modified_date should exist for a particular ID ...
select t1.ID, t1.branch, t1.modified_date
from my_table t1
where not exists (
select 0 from my_table t2 where t2.ID = t1.ID and
t2.modified_date < t1.modified_date)
iii) if you can guarantee the existence of an index defined on
the ID and modified_date columns (called my_index in this
example) you could do ...
select t1.ID, t1.branch, t1.modified_date
from my_table t1
where t1.modified_date = (
select /*+ index_asc (my_table my_index) */
t2.modified_date from my_table t2 where t2.ID = t1.ID and
rownum = 1)
You should test each of these options with your own data
set and see which works best for you. Some of them will
return the first matching rows of data very quickly but take
longer to return all of them, while others take a long time to
return the first rows but find the full set faster.
Make sure you run ANALYZE on your table whatever you do.

How to find the avg salary of first 3 employees based on each department?

how to find the avg salary of first 3 employees based on each department?

Hi,
Do you mean something like this?
with a as
select
deptno
,sal
,row_number() over ( partition by deptno order by sal desc) rn
from
emp
select
deptno
,round(avg(sal)) avg_sal_of_top_3
from
a
where
rn <= 3
group by
deptno
order by
deptno
DEPTNO AVG_SAL_OF_TOP_3
    10             2917
    20             2992
    30             1983
If not please give more details.
Regards,
Peter

How to find the number of occurance of a string in text field of Infopath form?

Hi All,
In Infopath text field, How to find the number of occurrence of a particular string in that field?
Thanks in advance!

You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
Example:
String: "1"
Box A - "123451234512345"
Box B - "23451234512345"
Box C - "2345234512345"
Box D - "234523452345"
etc.
We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
   class MyClass
       public static int counter = 0;
       public MyClass( ) { counter++; }
    // Then later in your program, you can do this:
    MyClass a = new MyClass();
    MyClass b = new MyClass();
    System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
     you will be having your first program values in internal table or some variables,
    when you are calling the second program you wii use like this,
    SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
                       WITH s_emp(second program select-options)   IN t_emp(first program variables)
                       WITH p_chk   EQ t_chk
                       WITH p_r1    EQ t_r1
                       WITH p_month EQ t_month
                       WITH s_cust1 IN t_cust1
                       WITH p_r2    EQ t_r2
                       WITH s_cust2 IN t_cust2
                       WITH s_week IN t_week
                       AND RETURN.
you have pas like this to get your first program details.

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to find the most matched values in the set of map?

Hi friends!
I have two vectors
vector<int> V1; vector<int> V2;
and a map<int, set<int>> M1;
I want to select common values from both V1 and V2 and check those values with the set in the map M1.
For example:
V1 contains;
2 4 6 8 9
V2 contains;
4 5 6 9 10
M1 contains;
1=>1 2 5 9
2=>4
3=>5 10
4=>2 4 8
5=>4 9
6=>4 6
7=>9 12
When we select the common values of V1 and V2 it is 4, 6, 9.
And we search for all 4, 6, 9 from the values of M1 which give more appropriate.
But, no all values in the set of map.
Then, we delete any value from 4, 6, 9, then remaining values would match any values from the map.
From the example, if we delete 6, then remaining 4, 9 will match with 5=>4 9, or if we delete 9, then 6=>4 6. Any one of the keys can be selected.
I know how to select the common values from V1 and V2, but I do not know how to match with the values and select the appropriate key from M1.
Could anyone help me to solve this?

This is not the question you asked, except perhaps in the subject. The subject is not the right place to put key features of the question. It is also important to use the body to ask just the question you want
answered. For example your real question has nothing to do with V1 and V2, just the common vector V (e.g. 4 6 9).
One way to solve your problem would be to create a new map
map<int, set<int>> M2;
with the same keys as M1. Each set of M2 should contain the elements of V that are
not in the corresponding set of M1.
Then pick the key of M2 that has the smallest set. If that set is empty, then the whole of V can be used. Otherwise the smallest set tells which elements of V have to be removed, and which is the desired key of M1.
In your example, key 5 of M2 will contain just 6, so you should remove 6 from V and select key 5.
Yes fine. I tried the following code and it creates the map M2 (NewMyMap in my code). But how to find the smallest set starting from size 1?
#include <vector>
#include <algorithm>
#include <iostream>
#include <map>
#include <set>
using namespace std;
typedef vector<int> IntVec;
typedef set<int> IntSet;
typedef map<int, IntSet> SetMap;
bool IsValueNotInSet(int value, IntSet& S);
SetMap CreatNewSetMap();
IntVec IVec; //This vector is for selecting certain keys from mySet map.
IntVec myVec;
SetMap mySet;
SetMap NewMyMap;
int main()
IVec.push_back(3); IVec.push_back(4); IVec.push_back(5); IVec.push_back(6);
myVec.push_back(4); myVec.push_back(6); myVec.push_back(9);
IntSet tempS;
tempS.insert(1); tempS.insert(2); tempS.insert(5); tempS.insert(9);
mySet.insert(make_pair(1,tempS));
tempS.clear();
tempS.insert(4);
mySet.insert(make_pair(2,tempS));
tempS.clear();
tempS.insert(5); tempS.insert(10);
mySet.insert(make_pair(3,tempS));
tempS.clear();
tempS.insert(2); tempS.insert(4); tempS.insert(8);
mySet.insert(make_pair(4,tempS));
tempS.clear();
tempS.insert(4); tempS.insert(9);
mySet.insert(make_pair(5,tempS));
tempS.clear();
tempS.insert(4); tempS.insert(6);
mySet.insert(make_pair(6,tempS));
tempS.clear();
tempS.insert(9); tempS.insert(12);
mySet.insert(make_pair(7,tempS));
cout<<"MYVEC\n";
cout<<"-------------\n";
for(IntVec::iterator itv = myVec.begin(); itv != myVec.end(); ++itv)
cout<<(*itv)<<" ";
cout<<"\n\n";
cout<<"\nMYSET\n";
cout<<"-------------";
for(map<int,set<int>>::iterator its = mySet.begin(); its != mySet.end(); ++its)
cout << endl << its->first <<" =>";
for(IntSet::iterator sit=its->second.begin();sit!=its->second.end();++sit)
cout<<" "<<(*sit);
cout<<"\n\n";
NewMyMap= CreatNewSetMap();
cout<<"\nNEWMYSET\n";
cout<<"-------------";
for(map<int,set<int>>::iterator its1 = NewMyMap.begin(); its1 != NewMyMap.end(); ++its1)
cout << endl << its1->first <<" =>";
for(IntSet::iterator sit=its1->second.begin();sit!=its1->second.end();++sit)
cout<<" "<<(*sit);
cout<<"\n\n";
return 0;
bool IsValueNotInSet(int value, IntSet& S)
IntSet::iterator it=find (S.begin(), S.end(), value);
if (it!=S.end())
return false;
return true;
SetMap CreatNewSetMap()
IntSet TSet;
for(IntVec::iterator it = IVec.begin(); it != IVec.end(); ++it)
SetMap::iterator its = mySet.find(*it);
if (its != mySet.end())
TSet.clear();
int key = its->first;
IntSet& itset = its->second;
for(IntVec::iterator itv = myVec.begin(); itv != myVec.end(); ++itv)
if(IsValueNotInSet((*itv), itset))
TSet.insert(*itv);
NewMyMap.insert(make_pair(key,TSet));
return NewMyMap;

Find the first occurance of a word

I have a script which finds and counts ALL occurances of a word.
I need the script to find the FIRST instance of a word only.
Can any one please advise how to modify the script to find the first instance of the word?
Script as follows:
var numWords = this.getPageNumWords(0);
for (var i=0; i<numWords; i++)
var ckWord = this.getPageNthWord(0,i);
if ( ckWord == "MATERIAL")
/*Script will go here based on finding the first instance of the word "MATERIAL"*/
I have tried var CKWord = this.getPageNthWord(0,0); but console reports back is UNDEFINED?

Thanks for your help. Script now returns the first occurance of the word "MATERIAL".
I know have to add to the script to find the SECOND OCCURANCE of the word "ISSUED".
Can you please advise how I would code the script for this, ie would this have something to do with the break command?
var numWords = this.getPageNumWords(0);
for (var i=0; i<numWords; i++)
var ckWord = this.getPageNthWord(0,i);
if ( ckWord == "ISSUED")
var coord = this.mouseX;
var annot = this.addAnnot({
page: 0,
type: "Stamp",
name: "AppStamp",
rect: [coord+1000, 2300, 30, 2820],
rotate: 90,
AP: "#C94cHAFFa42U1gTH5Tug5C" });
/*break; how can this be modified to break for the second occurance of the word "ISSUED"?*/

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

How to find the first occurrence of a string2 in string1

Similar Messages

Maybe you are looking for