How to find the fontType (Format) of a SUBSTITUTED or NOT_AVAILABLE font?

I can read the properties for name, fullname, stylename etc but not the fontType (PostScript, TrueType, OpenType...).
if the font is SUBSTITUTED, it returns the format of the substituted font (Helvetica).
if the font ist NOT_AVAILABLE it fails (exception).
how can I find out that info (by script)?
thank you!

The easiest way would probably to get out the manual or the read me which came with it, which will show the default IP.
If you have a Linksys router, the admin section will show the IPs of attached devices. As you can easily tell what the IPs of your computer(s) are, anything lefe over must be a different network device, such as a printer or your network drive.

Similar Messages

  • How to find the level of each child table in a relational model?

    Earthlings,
    I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
    So: How to find the level of each child table in a relational model?
    I have a relacional database (9.2), all right?!
         O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
        /↑\ Fks
       O"O O" <-- level 2 for first table (circle)
      /↑\ Fks
    "o"o"o" <-- level 1 for middle table (circle)
       ↑ Fk
      "º"Tips:
    - each circle represents a table;
    - red tables no have foreign key
    - the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
    I started thinking about the following:
    First I have to know how to take the children:
    select distinct child.table_name child
      from all_cons_columns father
      join all_cons_columns child
    using (owner, position)
      join (select child.owner,
                   child.constraint_name fk,
                   child.table_name child,
                   child.r_constraint_name pk,
                   father.table_name father
              from all_constraints father, all_constraints child
             where child.r_owner = father.owner
               and child.r_constraint_name = father.constraint_name
               and father.constraint_type in ('P', 'U')
               and child.constraint_type = 'R'
               and child.owner = 'OWNER') aux
    using (owner)
    where child.constraint_name = aux.fk
       and child.table_name = aux.child
       and father.constraint_name = aux.pk
       and father.table_name = aux.father;Thinking...
    Let's Share!
    My thanks in advance,
    Philips
    Edited by: BluShadow on 01-Apr-2011 15:08
    formatted the code and the hierarchy for readbility

    Justin,
    Understood.
    Nocycle not work in 9.2 and, even that would work, would not be appropriate.
    With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
    -- 1
    declare
      type udt_roles is table of varchar2(30) index by pls_integer;
      cRoles udt_roles;
    begin
      execute immediate 'create user philips
        identified by philips';
      select granted_role bulk collect
        into cRoles
        from user_role_privs
       where username = user;
      for i in cRoles.first .. cRoles.count loop
        execute immediate 'grant ' || cRoles(i) || ' to philips';
      end loop;
    end;
    -- 2
    create table philips.root1(root1_id number,
                               constraint root1_id_pk primary key(root1_id)
                               enable);
    grant all on philips.root1 to philips;
    create or replace trigger philips.tgr_root1
       before delete or insert or update on philips.root1
       begin
         null;
       end;
    create table philips.root2(root2_id number,
                               constraint root2_id_pk primary key(root2_id)
                               enable);
    grant all on philips.root2 to philips;
    create or replace trigger philips.tgr_root2
       before delete or insert or update on philips.root2
       begin
         null;
       end;
    create table philips.node1(node1_id number,
                               root1_id number,
                               node2_id number,
                               node4_id number,
                               constraint node1_id_pk primary key(node1_id)
                               enable,
                               constraint n1_r1_id_fk foreign key(root1_id)
                               references philips.root1(root1_id) enable,
                               constraint n1_n2_id_fk foreign key(node2_id)
                               references philips.node2(node2_id) enable,
                               constraint n1_n4_id_fk foreign key(node4_id)
                               references philips.node4(node4_id) enable);
    grant all on philips.node1 to philips;
    create or replace trigger philips.tgr_node1
       before delete or insert or update on philips.node1
       begin
         null;
       end;
    create table philips.node2(node2_id number,
                               root1_id number,
                               node3_id number,
                               constraint node2_id_pk primary key(node2_id)
                               enable,
                               constraint n2_r1_id_fk foreign key(root1_id)
                               references philips.root1(root1_id) enable,
                               constraint n2_n3_id_fk foreign key(node3_id)
                               references philips.node3(node3_id) enable);
    grant all on philips.node2 to philips;
    create or replace trigger philips.tgr_node2
       before delete or insert or update on philips.node2
       begin
         null;
       end;                          
    create table philips.node3(node3_id number,
                               root2_id number,
                               constraint node3_id_pk primary key(node3_id)
                               enable,
                               constraint n3_r2_id_fk foreign key(root2_id)
                               references philips.root2(root2_id) enable);
    grant all on philips.node3 to philips;
    create or replace trigger philips.tgr_node3
       before delete or insert or update on philips.node3
       begin
         null;
       end;                          
    create table philips.node4(node4_id number,
                               node2_id number,
                               constraint node4_id_pk primary key(node4_id)
                               enable,
                               constraint n4_n2_id_fk foreign key(node2_id)
                               references philips.node2(node2_id) enable);
    grant all on philips.node4 to philips;
    create or replace trigger philips.tgr_node4
       before delete or insert or update on philips.node4
       begin
         null;
       end;                          
    -- out of the relational model
    create table philips.node5(node5_id number,
                               constraint node5_id_pk primary key(node5_id)
                               enable);
    grant all on philips.node5 to philips;
    create or replace trigger philips.tgr_node5
       before delete or insert or update on philips.node5
       begin
         null;
       end;
    -- 3
    create table philips.dictionary(table_name varchar2(30));
    insert into philips.dictionary values ('ROOT1');
    insert into philips.dictionary values ('ROOT2');
    insert into philips.dictionary values ('NODE1');
    insert into philips.dictionary values ('NODE2');
    insert into philips.dictionary values ('NODE3');
    insert into philips.dictionary values ('NODE4');
    insert into philips.dictionary values ('NODE5');
    --4
    create or replace package body philips.pck_restore_philips as
      procedure sp_select_tables is
        aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables   
        aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
        aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
        aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
        aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
        sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02 
        cTables                  udt_tables; -- collection to store table names for the relational depth
      begin
        -- omits all referential constraints:
        dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
        -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
        dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
        -- append a SQL terminator (; or /) to each DDL statement:
        dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
        -- create/open files for export DDL:
        aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
        aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
        aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
        aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
        aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
        select d.table_name bulk collect
          into cTables -- collection with the names of tables in the schema philips
          from all_tables t, philips.dictionary d
         where owner = 'PHILIPS'
           and t.table_name = d.table_name;
        -- execution
        sp_seeks_ddl(aExportTablesPhilips,
                     aExportReferencesPhilips,
                     aExportIndexesPhilips,
                     aExportGrantsPhilips,
                     aExportTriggersPhilips,
                     cTables);
        -- closes all files
        utl_file.fclose_all;
      end sp_select_tables;
      procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                             aExportReferencesPhilips in utl_file.file_type,
                             aExportIndexesPhilips    in utl_file.file_type,
                             aExportGrantsPhilips     in utl_file.file_type,
                             aExportTriggersPhilips   in utl_file.file_type,
                             cTables                  in out nocopy udt_tables) is
        cDDL       clob := null; -- colletion to save DDL
        plIndex    pls_integer := null;
        sTableName varchar(30) := null;
      begin
        for i in cTables.first .. cTables.count loop
          plIndex    := i;
          sTableName := cTables(plIndex);
           * Retrieves the DDL and the dependent DDL into cDDL clob       *      
          * for the selected table in the collection, and writes to file.*
          begin
            cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
            sp_writes_ddl(aExportTablesPHILIPS, cDDL);
          exception
            when dbms_metadata.object_not_found then
              null;
          end;
          begin
            cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
            sp_writes_ddl(aExportReferencesPhilips, cDDL);
          exception
            when dbms_metadata.object_not_found2 then
              null;
          end;
          begin
            cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
            sp_writes_ddl(aExportIndexesPhilips, cDDL);
          exception
            when dbms_metadata.object_not_found2 then
              null;
          end;
          begin
            cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
            sp_writes_ddl(aExportGrantsPhilips, cDDL);
          exception
            when dbms_metadata.object_not_found2 then
              null;
          end;
          begin
            cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
            sp_writes_ddl(aExportTriggersPhilips, cDDL);
          exception
            when dbms_metadata.object_not_found2 then
              null;
          end;
        end loop;
      end sp_seeks_ddl;
      procedure sp_writes_ddl(aExport in utl_file.file_type,
                              cDDL    in out nocopy clob) is
        pLengthDDL  pls_integer := length(cDDL);
        plQuotient  pls_integer := null;
        plRemainder pls_integer := null;
      begin
          * Register variables to control the amount of lines needed   *
         * for each DDL and the remaining characters to the last row. *
        select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
          into plQuotient, plRemainder
          from dual;
          * Join DDL in the export file.                            *
         * ps. 32766 characters + 1 character for each line break. *
        -- if the size of the DDL is greater than or equal to limit the line ...
        if plQuotient >= 1 then
          -- loops for substring (lines of 32766 characters + 1 break character):
          for i in 1 .. plQuotient loop
            utl_file.put_line(aExport, substr(cDDL, 1, 32766));
            -- removes the last line, of clob, recorded in the buffer:
            cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
          end loop;
        end if;
          * If any remains or the number of characters is less than the threshold (quotient = 0), *
         * no need to substring.                                                                 *
        if plRemainder > 0 then
          utl_file.put_line(aExport, cDDL);
        end if;
        -- record DDL buffered in the export file:
        utl_file.fflush(aExport);
      end sp_writes_ddl;
    begin
      -- executes main procedure:
      sp_select_tables;
    end pck_restore_philips;<font color="red">The problem is that I still have ...
    When creating the primary key index is created and this is repeated in the file indexes.
    How to avoid?</font>

  • How to  find the user exit for a screen..

    Hi,
    plz help me how to find the user exit for a screen..?
    Regards
    Anbu

    Hi,
    check this program this will give you the list of user-exit and BADI for the perticular Tcode.
    REPORT  zuserexit_badi.
    TABLES : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode,
    p_pgmna LIKE tstc-pgmna .
    DATA wa_tadir TYPE tadir.
    START-OF-SELECTION.
      IF NOT p_tcode IS INITIAL.
        SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
      ELSEIF NOT p_pgmna IS INITIAL.
        tstc-pgmna = p_pgmna.
      ENDIF.
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'PROG'
        AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
          WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
            WHERE pgmid = 'R3TR'
            AND object = 'FUGR'
            AND obj_name EQ enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
        SELECT * FROM tadir INTO TABLE jtab
        WHERE pgmid = 'R3TR'
        AND object IN ('SMOD', 'SXSD')
        AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(105) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
          SORT jtab BY object.
          DATA : wf_txt(60) TYPE c,
          wf_smod TYPE i ,
          wf_badi TYPE i ,
          wf_object2(30) TYPE c.
          CLEAR : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
          LOOP AT jtab INTO wa_tadir.
            AT FIRST.
              FORMAT COLOR COL_HEADING INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 'Enhancement/ Business Add-in',
              41 sy-vline ,
              42 'Description',
              105 sy-vline.
              WRITE:/(105) sy-uline.
            ENDAT.
            CLEAR wf_txt.
            AT NEW object.
              IF wa_tadir-object = 'SMOD'.
                wf_object2 = 'Enhancement' .
              ELSEIF wa_tadir-object = 'SXSD'.
                wf_object2 = ' Business Add-in'.
              ENDIF.
              FORMAT COLOR COL_GROUP INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 wf_object2,
              105 sy-vline.
            ENDAT.
            CASE wa_tadir-object.
              WHEN 'SMOD'.
                wf_smod = wf_smod + 1.
                SELECT SINGLE modtext INTO wf_txt
                FROM modsapt
                WHERE sprsl = sy-langu
                AND name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WHEN 'SXSD'.
    For BADis
                wf_badi = wf_badi + 1 .
                SELECT SINGLE text INTO wf_txt
                FROM sxs_attrt
                WHERE sprsl = sy-langu
                AND exit_name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED ON.
            ENDCASE.
            WRITE:/1 sy-vline,
            2 wa_tadir-obj_name HOTSPOT ON,
            41 sy-vline ,
            42 wf_txt,
            105 sy-vline.
            AT END OF object.
              WRITE : /(105) sy-uline.
            ENDAT.
          ENDLOOP.
          WRITE:/(105) sy-uline.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No.of Exits:' , wf_smod.
          WRITE:/ 'No.of BADis:' , wf_badi.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(105) 'No userexits or BADis exist'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(105) 'Transaction does not exist'.
      ENDIF.
    AT LINE-SELECTION.
      DATA : wf_object TYPE tadir-object.
      CLEAR wf_object.
      GET CURSOR FIELD field1.
      CHECK field1(8) EQ 'WA_TADIR'.
      READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
      MOVE jtab-object TO wf_object.
      CASE wf_object.
        WHEN 'SMOD'.
          SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
          CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
        WHEN 'SXSD'.
          SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
          CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
      ENDCASE.
    Reagards,
    Bharat.

  • How to find the db size

    Hi ,
    Please tell me how to find the db size.
    Thanks,
    Kumar.

    If I understand correctly, the above query will give the space allocated to the database. This isn't necessarily the same as the space used by the database. Or do I need to clean my glasses ?
    I use the following to get sizes for tablespaces (may need some formatting done - works in 9i and 10g) :
    SELECT
         Total.name "TABLESPACE_NAME",
         total_space "TABLESPACE_SIZE",
         nvl(Free_space, 0) Free_space,
         nvl(total_space-Free_space, 0) Used_space
    FROM
         select
              tablespace_name,
              sum(bytes/1024/1024) Free_Space
         from
              sys.dba_free_space
         group by
              tablespace_name
         ) Free,
         select
              b.name,
              sum(bytes/1024/1024) TOTAL_SPACE
         from
              sys.v_$datafile a,
              sys.v_$tablespace B
         where
              a.ts# = b.ts#
         group by
              b.name
         ) Total
    WHERE
         Free.Tablespace_name(+) = Total.name
    ORDER BY
         Total.name
    ;

  • How to find the application type fora Script based on Form name?

    Hi Guys,
                can anybody tell me how to find the Application Type and output type based on Form name and print program name?
    I am having form name as: ZINVENT (INVENT is the actual) and program name as RM07IDRU.How can i find the Appliction ntype and OutType for entering into the NACE tr code.
                    i tried thru TNAPR table but i was not able to find the Entry in the TNAPR with form Name and printprogram name
                   Th Script is about Phsical inventory Documents.
    Thanks,
    Gopi.

    You can use this...
    REPORT  Z_DUMMY_ATG NO STANDARD PAGE HEADING.
    *======================================================================
    * Tablas
    *======================================================================
    TABLES: TTXFP.
    *======================================================================
    * Tablas Internas
    *======================================================================
    DATA: T_TTXFP TYPE STANDARD TABLE OF TTXFP WITH HEADER LINE.
    *======================================================================
    * Selection-Screen
    *======================================================================
    SELECTION-SCREEN BEGIN OF BLOCK SCRIPT WITH FRAME.
    SELECT-OPTIONS:
                  PRINTNAM FOR TTXFP-PRINT_NAME,
                  TDFORM   FOR TTXFP-TDFORM.
    SELECTION-SCREEN END OF BLOCK SCRIPT.
    *======================================================================
    * Start-of-selection
    *======================================================================
    START-OF-SELECTION.
      PERFORM SELECT_DATA.
      PERFORM PRINT_DATA.
    *&      Form  SELECT_DATA
    *       Seleccionamos los datos del reporte.
    FORM SELECT_DATA.
      SELECT TDFORM PRINT_NAME LAST_PROG
      INTO TABLE T_TTXFP
      FROM TTXFP
      WHERE PRINT_NAME IN PRINTNAM
        AND TDFORM IN TDFORM
      ORDER BY TDFORM.
    ENDFORM.                    "SELECT_DATA
    *&      Form  PRINT_DATA
    *       Imprimimos el resultado del reporte.
    FORM PRINT_DATA.
      FORMAT COLOR 3.
      WRITE: 'Programa', 18 'Formulario', 50 'Flag de Ultimo programa'.
      FORMAT COLOR OFF.
      SKIP 1.
      IF NOT T_TTXFP[] IS INITIAL.
      SORT T_TTXFP BY PRINT_NAME.
        LOOP AT T_TTXFP.
          IF T_TTXFP-LAST_PROG EQ 'X'.
          FORMAT COLOR 4.
          WRITE:/ T_TTXFP-PRINT_NAME, 18 T_TTXFP-TDFORM, 60 T_TTXFP-LAST_PROG.
          FORMAT COLOR OFF.
          ELSE.
          WRITE:/ T_TTXFP-PRINT_NAME, 18 T_TTXFP-TDFORM, 60 T_TTXFP-LAST_PROG.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "PRINT_DATA
    Greetings,
    Blag.

  • How to find the arguments of a static method from the class file

    Hi,all !
    How to find the arguments of a static method from the class file? for example, when we meet a bytecode "invokestatic", how can I know the arguments of this static method?

    Hi,all !
    How to find the arguments of a static method from the
    class file? for example, when we meet a bytecode
    "invokestatic", how can I know the arguments of this
    static method?You mean
    1. The values?
    2. Argument names?
    3. Argument signatures.
    I would suppose for the last that the easiest way would be to parse the signature string.
    The first is not possible - not from the class file.
    The second is only in the debug information stored in the optional part of the class file. And figuring out the format for that is going to be a problem.

  • How to find the difference between 2 time values in Java

    hi all,
    i have 2 time values
    String time1="6:20";
    String time2="21:30"
    How to find the difference between 2 times in Java?
    pls help
    thanx in advance....

    Calculating Java dates: Take the time to learn how to create and use dates
    Working in Java time: Learn the basics of calculating elapsed time in Java
    Formatting a Date Using a Custom Format
    Parsing a Date Using a Custom Format

  • How to find the total no of pages in script

    hi
    how to find the total no of pages in script

    Hi
    ·     &SAPSCRIPT-FORMPAGES&:
    This field contains a number representing the total number of pages of the currently formatted form (any output between START_FORM and END_FORM). The page counter mode (START, INC, HOLD) of the individual pages is ignored. You can use this symbol to formulate information like
    ‘Page x of y’ for your output.
    ·     &SAPSCRIPT-JOBPAGES&:
    This field contains a number representing the total number of pages of all forms contained in the currently formatted print request, in other words, of all forms created using the OPEN_FORM, START_FORM.. ENDFORM, START_FORM.. END_FORM,..., CLOSE_FORM function modules.
    When using the SAPSCRIPT-FORMPAGES or SAPSCRIPT-JOBPAGES symbols, SAPscript leads all output pages of the current form or current print request into main memory to replace the symbol by the appropriate value. For large output jobs, this can mean a very large amount of memory.
    ·     &PAGE&, &NEXTPAGE&
    This symbols are initially converted using the options specified in the form of the page definition.
    Reward all helpfull answers
    Regards
    Pavan

  • How to find the product key on a preinstalled version of Windows 8?

    This is a similar qustion:
    https://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-find-the-product-key-on-a-prein...
    But its not actually explaining which part of the BIOS menu contains the windows key.
    I see a UUID  number -- but that doesmt match the windows 8 5x5 code format.  SO!
    where can I locate the windows 8 key in the BIOS?

    On recent ThinkPad, the Product ID Key sticker has been moved from the bottom of the unit to behind the battery.
    You need to contact Lenovo technical support directly to ask about recovery media.

  • How to find the listener port on windows?

    Hi Friends,
    We have a client who is still using Oracle 8.0.6 on NT 4.0
    I have a laptop with oracle client 10g.
    I want to connect to the NT database to check it.
    How do I know what port does the listener used ? what is the command to run at the c:\ command prompt?
    I tried> c:\ lsnrctl stat but the command is not recognized
    I tried to find the lsnrctl and bin but there is not.
    Please help
    Thanks a lot

    ytterp2009 wrote:
    Please help.. and please do NOT post [duplicate posts|http://forums.oracle.com/forums/thread.jspa?threadID=935282&tstart=0]
    How to find the listener port on windows?The Internet Protocol stack comes with a number of utilities - one of these, called netstat, is very useful to determine which processes are doing what to which IP ports on that platform. Unfortunately, different flavours are implemented. So the Windows one does not support the parameters and output than the Unix/Linux one.
    You can use the following on Windows (run it via a command console) to see what processes are listening on what address and port number:
    c:\> netstat -n -a -p tcp
      -n = display IP addresses and ports in numeric format
      -a = list all ports (including ones used for listening
      -p tcp = only display protocol entries for TCP An Oracle listener entry should look something as follows:
    Proto   Local Address  Foreign Address   State
    TCP     0.0.0.0:1521   0.0.0.0:0         LISTENINGSeeing IP +0.0.0.0+ means that the Listener is accepting connections on all your network interfaces - which is standard. The port number is typically 1521. The foreign address is meaningless for a port in listening state.
    PS. Why not simply check the listener.ora configuration file? Because what is actually happening may not be what you thought you configured to happen..

  • How to find the number of data items in a file written with ArryToFile function?

    I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
    If you are young work to Learn, not to earn.
    Solved!
    Go to Solution.

    What about:
    OpenFile ( your file );
    cnt = 0;
    while ((br = ReadLine ( ... )) != -2) {
    if (br == -1) {
    // I/O error: handle it!
    break;
    cnt++;
    CloseFile ( ... );
    There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
    After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to find the number of links in a website

    hi every body
    can any one clear my doubt
    my doubt is that
    in a website how to find the number of links the hole website contains
    is there any navigation tool to find that
    plz help me yar
    i am waiting for the reply

    If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
    If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
    Hope this helps.

  • How to find the number of times method being called.....

    hi,
    can any one pls tell me how to find the number of times the method being called......herez the example....
    Refrence ref = new Refrence();
    for(int i = 0;i < arr.length; i++){
    if(somecondition){
    ref.getMethod();
    here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

    can any one pls tell me how to find the number of times the method being called......
    herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • How to find the number of fetched lines from select statement

    Hi Experts,
    Can you tell me how to find the number of fetched lines from select statements..
    and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
    Thanks in advance
    santosh

    Hi,
    Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
    For ex:
    data: itab type mara occurs 0 with header line.
    Select * from mara into table itab.
    Write: Sy-tabix.
    This will give you the number of entries that has been selected.
    I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
    Hope this helps,
    Sudhi
    Message was edited by:
            Sudhindra Chandrashekar

Maybe you are looking for