How to find the .htm resource pages for search profiles?

Good Day All,
I am trying to customize the search page (search profiles) within UCM, i want to do that by use the appropriate .htm resource page within a custom component.
I found the checkin .htm pages and i can make changes on them and the changes are reflected on the UCM.
anyone can help me and providing me with pages name, or tell me how to thier names.
Regards.

Thanks so much for your reply.
I have the following case:
assume that i have a field on ucm named "xDepartment", and its type on ucm is Int (integer) . This filed is configured to Table-View option list, and the view have two columns (key, value). also assume that i have the following data in this view:
1: CIS
2: MIS
3: BIS
4: Enginering
5: Accounting
on search profiles, when i select a profile that have this field, the possible values that can be searched are integer and will appear From - To ; since this field is defined as integer. But the user that will search don't know the mapped value for each key, because on checkin form the values appears on the secreen.
what i want to ask is:
can we specifiy the possible search values to be the values not keys of this view. can the search values appears like what values appearch in checkin page
note:
i have an illustration image, but i don't know how to add it here on forums
Regards

Similar Messages

How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
This question was solved.
View Solution.

Hi,
From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How many is the maximum application pages for an iPhone?

how many is the maximum application pages for an iPhone?

Used to be 11, not sure but you can check here http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How to find the users who r assigned to profile sap_all through su01

how to find the users who r assigned to profile sap_all through su01

you can get into SUIM-->where used lists, check for users with profile SAP_ALL you can get a list of users who have
it. and you can get into SUIM through SU01 from user information system link.
you can execute RSUSR002 from SA38/SE38.
RSUSR002 is the report which gets you the whereused list for profiles within roles, users.
you can get it from transaction SECR ofcourse you are executing the same report.
you can get from UST04 table and obviously USR04 also because sometimes you miss some details from UST04 because of sync problems.

How to find the plant assigned to a user profile

Hi All,
i am new to SRM but supporting it. so pls help.
how to find the plant assigned to a user profile?
i need to assign a address code to a company code-plant-building code so that the shipping address should come as a default in the shopping cart.
i found many plants in the PPOMA_BBP transaction but could not understand which plant i should take for the abhove assignment.
Thanks in advance.
Regards,
Anubhab

Hi,
There is one check box in transaction for default value for every attribute. And a particular attribute there has to be a default value.
Use FM BBP_GET_ATTRIBUTES_AT03 to fetch all attributes for a particular shopper. Then check for the particular attribute witha default value.
In this way you will get default plant for that shopper can further requirement can be completed.
Regards,
Brajvir

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

How to find the Adobe barcode name for its corresponding SAP Script barcode

Dear All,
We are doing conversions from SAPScript to Adobe forms.
The barcode used in two sapscript forms are 'BC_CD39' and 'ARTINR' respectively .
I would like to know the corresponding barcode name to be assigned to Adobe forms as the above barcode names are not present in the Object Library-> Barcode section of Adobe forms.
regards,
PP

>
Muralidhar Medisetty wrote:
> Hi,
>
> I had an issue, in the transaction F110 Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
>
> Thanks in advance.
hey
NACE is the transaction ..for this u must know the output type..
Script for Cheque Printing and Payment Advice can be known from Transaction FBZP...
FBZP -> paying Company Codes -> u will get Script used for Payment Advice
FBZP -> Pmnt methods in company code -> u will get Script used for Cheque Print
....Give points if useful.....
Edited by: Satyabrata sahoo on Oct 14, 2008 4:42 PM

How to find the number of pages of a certain size

I have to do a good deal of printing at work, and often the number of pages have to be logged . Some files have various sizes in them, which are printed at either 8.5x11 or 11x17. I was wondering if there is a feature, or third party program that would allow me to view the number of pages for each page size, so as not to have to count by hand. Thank you.

if its just genearl tools you want (as opposed to programming your own), you could use the free trials on netmechanic.com and linkpopularity.com

How to find the list of Queries for that have statistics enabled in the sys

Hi ,
How to find the list of Queries that have statistics enabled on them in the system.
Please help me in this regard
Thanks
Maruthi

hi ,
I found three options there like
X - on
D - Default
off
can you please expalin the difference between on and Default
Thanks in Advance
Maruthi

How to find the Color Space name for a PDEElement

Hi
I am trying to find out the color space for each PDEElement in my PDF file. While doing this,
I put some debug statements ( cout stmts ) that print the color_space as integer values. I gave this list
after the code. I belive the color spaces should be something like CMYK, DeviceRGB,DeviceGray..etc.
How can I know the actual color space name coresponding to these numbers printed in Debug statements.
Kindly please help me..
void ProcessElementDetails(PDEElement element)
 PDEGraphicState gfx_state;
 ASInt32 pdeType = PDEObjectGetType(reinterpret_cast<PDEObject>(element));
 ofstream outfile("E:\\temp\\test.txt",ios::app);
 outfile<<"ProcessElementDetails\n";
 if ( pdeType == kPDEText )
 outfile<<"PDE Text type\n";
 PDEText pde_text = (PDEText) element;
 ASInt32 num_run,i;
 num_run = PDETextGetNumRuns(pde_text);
 outfile<<"Number of Runs for PDEText :"<<num_run<<"\n";
 for (i = 0; i < num_run; i++)
 PDETextGetGState(pde_text,kPDETextRun,i,&gfx_state, sizeof (PDEGraphicState));
 ASAtom color_space = PDEColorSpaceGetName(gfx_state.fillColorSpec.space);
 outfile<<"Color Space :"<<color_space<<"\n";
 if (pdeType == kPDEImage )
 outfile<<"PDE Image type\n";
 PDEElementGetGState(element,&gfx_state,sizeof (PDEGraphicState));
 ASAtom color_space = PDEColorSpaceGetName(gfx_state.fillColorSpec.space);
 outfile<<"Color Space :"<<color_space<<"\n";
 if (pdeType == kPDEContainer)
 outfile<<"PDE Container type\n";
 PDEContent content = PDEContainerGetContent(reinterpret_cast<PDEContainer>(element));
 ASInt32 numElem = PDEContentGetNumElems(content);
 for (ASInt32 i = 0; i < numElem; i++)
 element = PDEContentGetElem(content, i);
 ProcessElementDetails(element);
Debug statements with color numbers:
====================================
ProcessElementDetails
PDE Image type
Color Space :700
ProcessElementDetails
PDE Text type
Number of Runs for PDEText :63
Color Space :388
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :388
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :388
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
ProcessElementDetails
ProcessElementDetails
PDE Text type
Number of Runs for PDEText :38
Color Space :389
Color Space :700
Color Space :390
Color Space :388
Color Space :390
Color Space :388
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :390
Color Space :389
Color Space :700
Color Space :700
Color Space :700
Color Space :700
Color Space :700
Color Space :700
Color Space :700
Color Space :700
SeparateColorPlates
PDF file exists
Number of Pages:1
Number of Elements:5

As you may have noticed, the "numbers" you see are actually of type ASAtom -
which is a type declared in the SDK to represent reused strings. You have to
read the relevant documentation to learn how to use the SDK - there is no
way around it. The Acrobat SDK is very powerful, but also a lot more
complicated than most people expect when they start to work with it. Take
your time to learn how to use it.
In this particular case, you need to call this function to convert the
ASAtom to a string:
const char* ASAtomGetString<http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html#ASAtomGetString135%28%29>
(ASAtom<http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html#ASAtom>atm)
(from
http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com

How to find the name of query for a given report

Hi All,
I am having the name of a report and i need to find out the name of query for that report . Plz tell me how to find out the name of the query for a given report.
Thanks.
Regards,
Pooja Joshi.

Use this FM
RSAQ_DECODE_REPORT_NAME
This FM takes program name as I/P and gives Query Name as O/P.
This FM uses the structure AQADEF to fetch the data.
Hope this helps.
Regards
Vinayak

How to find the .htm resource pages for search profiles?

Similar Messages

Maybe you are looking for