How to find the IDOC for the archived message in integration engine

Hello experts
                          In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

Similar Messages

  • How to find workarea ID for the work area name.

    Hi Experts..
    How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
    Points would be rewarded for helpful answers..
    Thanks
    Kunal Halarnakar

    U want to fetch the workarea description ?
    we can fetch it from CCIHT_WALD table with the RECN value.
    The informations are stored in AUSP table with the characterstic(ATINN) value.

  • How to find Related Tables for the Tcode given.

    How to find Related Tables for the Tcode given. (master data)
    Thanks in advance.

    Hi Sridhar,
    Welcome to SDN.
    The tables for a given transaction can be seen in the transaction SE80.
    First goto SE93.
    Give ur Tcode and find the program name.
    Now goto SE80. select program in the first dropdown and give the program name in the second box. U can find the list of tables used.
    One more way is : use ST05.
    and One more is using FM 'get_tables'
    Thanks,
    Shailaja
    Edited by: Shailaja on Jul 11, 2008 12:33 PM

  • How do i generate the idoc for the custom infotype?

    Hi Experts,
        I have a requirement to create the custom infotype and generate the idoc for the custom infotype
        whenever the user change or crate the data by PA30, PA40 transaction .
    so please give some help to write a logic for generate the idoc?
    Thanks in advance.
    Venkat

    I have just found out from the Archives, it is not possible to generate a formula line (trend line) in Numbers_08.
    I am currently upgrading to Numbers_09.

  • Missing items in the IDoc for the delivery

    Hi to all,
    Sorry if not posting in the right forum.
    In my customer's scenario, an IDoc is created against a delivery (via the delivery output), and sent via ALE to a distant warehouse system, for picking and GI posting (basic type SHPMNT03).
    For some times, the IDoc created against deliveries including BOMs is missing the main item of the BOM (though the BOM main item is in the delivery).
    Consequently, the integration in the distant system is failing, because the higher-level item referenced in the BOM sub-items is missing.
    Surprisingly, re-triggering the delivery output does re-generate a complete IDoc, where the segment for the main item is back.
    I looked almost everywhere, did many searches in OSS (on SHPMNT03, on HIPOS, on E1ELD24 - segment name in the IDoc -, on "Missing items in the IDoc for the delivery", etc...), I even simply googled the web, but I can't even figure out what is the cause for this (I imagined it could be caused by a missing commit in the program generating the IDoc, but don't know whether this make sense).
    Any help would be highly appreciated.
    Thanks in advance and best regards
    Yan
    Edited by: Yan Loiseau on Jul 8, 2010 12:52 PM
    Edited by: Yan Loiseau on Jul 8, 2010 12:56 PM

    Hello Yan
    Jelena is right, you are better off taking it up with SAP. I also did not find any relevant OSS notes.
    However the issue, according to my reading, is in the following areas:
    1) LV56KF05: INCLUDE LV56KF62 .  " FILL_E1EDL24"
    This fills the EIEDL24 segment, may be the main item is filled  initially and overwritten later.
    2) Function Module: IDOC_OUTPUT_DELVRY
    You can look at the following OSS notes (though not fully relevant)  for some clues:
    810981 - Reference data missing in DESADV IDoc from decentralized WMS
    537470 - BOM + batch split in decentralized WMS, confirmation fails
    752921 - VL563: Higher-level item does not exist
    705086 - Higher-level item does not refer to existing item
    Hope this helps. Good luck.

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • How to find compensation data for the year

    Dear All,
    Scenario:
    A company wants to know the comepnsation data for financial year 2009-2010.
    Problem: I couldnot find a single report which can provide the compensation of an employee for the year.
    We are trying to build a report however needs input if anyone has done that:
    Table which stores this data is PS_COMPENSATION.
    Problem is : it stores data in effective date.
    How to then convert it into a year -April 2010 to March 2011
    For example: cases
    a. existing employee: whose effective comp data will be less than April 2010
    - Plus, there are pay rate changes between April 2010 to march 2011. (Pay rate change can happen on any date of the month)
    - How can I add them to find the Compensation as per comp page from 1st April to 31st march 2011

    I'm afraid what you're looking for is not likely to be a trivial task. If you have all of the modules required for the "Report Total Compensation" product, then you should take a look at the associated PeopleBook. I think you will have to be on HRMS 9.0 at a minimum, and using Payroll for North America and Benefits Administration.
    To create a custom solution, you may have to consider a variety of other factors such job status--leave, terminated, terminated with pay, etc.--hourly vs. salaried, part time vs. full time, multi-job, variable compensation. It will depend entirely on the specific features that are being used at your site.
    If you provide a very detailed example of the output you are looking for with sample data, someone might be willing to offer a solution.
    Regards,
    Bob

  • How to find out tcode for the zprogram.

    Hi All,
    How to find out the Tcode of a Zprogram.
    I will appritiate your help.
    Thanks,
    Veni.

    Couple of ways to do this,  one is to go to SE93 and do F4 on the transaction code field, click information system,  click the all selections icon, then put the name of the z program in the field, and hit enter,  this will give you the tcode.
    Regards,
    RIch Heilman
    Message was edited by:
            Rich Heilman

  • Qosmio G20 - How to find a update for the video card?

    hi i cant find the update for video card and when i run games he side to me your video card drivers are too old.update them.
    my laptop:(toshiba Qosmio G20)
    my vidoe card:(NVIDIA GeForce Go 6600)
    Operating System:(Microsoft Windows XP Professional)

    same problem when i go to nvidia i see new update but when i want to download it i cant there is problem and that apicture:
    <a href="http://img162.imageshack.us/i/18718370.jpg/" target="_blank"><img src="http://img162.imageshack.us/img162/9370/18718370.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a><br /><br /><a href="http://img604.imageshack.us/content.php?page=blogpost&files=img162/9370/18718370.jpg" title="QuickPost"><img src="http://imageshack.us/img/butansn.png" alt="QuickPost" border="0"></a> Quickpost this image to Myspace, Digg, Facebook, and others!

  • How to find component details for the equipment BOM

    Dear All ,
    I have a requirement ..I need to find all the component numbers for the equipment BOM. Can anybody pls help me in finding a table containing this information. I check in tcode IB02,IB03 but I am not able to find the database table containing this information.
    Regards,
    sap_code.

    Hi, Main table for equipment BOM is EQST. You can get the details from STPO (Item) and STKO (Header). You can use the FM CSAI_BOM_READ. Here u need to pass the header details and CSIN-STLTY = E " Equipment BOM.
    Thanks
    Subhankar

  • How to find config table for the field "language" in infotype-0002

    Hi Gurus,
    We are implementing ECC 6.0 at our client site.
    The client wants to use language field in persoanl data infotype as mother tongue and include indian languages.
    He don't want all other languages like spanish etc instead he wants indian languages like Hindi,telugu,tamil etc.
    can any body please help me in which table we can configure this.
    Thanks in advance
    Regards
    AnanyaK

    Hi,
    You can enter the languages in the IMG
    Path is
    IMG-> Personnel Management-> Personnel Administration -> Personnel Data-> Languages
    Or  you can simply go for technical information in the field name and will get the table name for that field and can maintain in SM30
    Regards,
    Kapil Kaushal

  • When i am running the RBDMDOC it will not genarated the idoc for the infotype 0105

                   Hi experts,
                            I am run a pa40 action and change the record of 0105 infotype, in bd64 as part of data filtering I am also mentioned 0105 . but when I am run the RBDMIDOC  the idoc is not generated of the infotype 0105 .
    Thanks in Advance .
    Venkateswara Rao.

    Hi Venkat Narayan,
       Thank for giving such a help,
    1.   I am created record for the infotypes  i.e :0,1,2,6,105.
    2    In bd64 I done a data filtering for above infotypes , its fine , but when I am running the bd21   Tcode the idoc is generated for    0,1, 2,6,. it is not generated for p0105.
         please find the following screen shorts.  
    Thanks.
    venkat

  • How to find EH GUID for unprocessed event message id?

    Hello  SCEM experts
    I need to know how to fetch header GUID from unprocessed event gu id
    In /SAPTRX/EVM_HDR table we have the event guid of unprocessed events under field EVT_GUID
    I need to find the linkage of this unprocessed event with the main header guid ( like field ''EH_GUID" in table /SAPTRX/EH_HDR).
    Issue: we need to write the report to process the thousand of unprocessed event messages in the /SAPTRX/EVM_STATUS
    please let me know if anyone has worked on the same requirement like how we can reprocess unprocessed messages
    Thanks

    Hello Steffen
    The example you have mentioned is not the case in my situation.
    Here in system , I can see the unprocessed entries in table "/SAPTRX/EVM_UNPR". The same entries I can also see in table/SAPTRX/EVM_HDR but not in anyother SAP table.
    I have checked the SAP NOTE# 656990 - Important background jobs for SAP
    Event Management
    There are 3 reports mentioned iN NOTE:
    1) /SAPTRX/PROCESS_LOCKED_EHS
    2) /SAPTRX/PROCESS_LOCKED_SETS
    3) /SAPTRX/R_REPOST_AI_LOGS
    After executing the above reports the problem has not solved yet.
    As this is very common behaviour how we can reprocess these unprocessed events.
    Many thanks

  • How to find user exit for the transaction PBAW

    Dear Freinds
                 In Recruitment ....PBAW(Job Advertisements--when we execute the
    transaction PBAW ...we can find create Advertisement...  > here will create posting
    in this screen i have to add a field  Status  . could you please let me know how
    i can add.. Is there any user exit through which i can add a field or there is any way...
    as it is standard..
    regards
    Vamsi.

    Hello Vamsi,
    This might be of help. It is a program to find user exits based on transaction codes. Just install it on your sandbox and see if it works for you.
    http://www.erpgenie.com/abap/code/abap26.htm
    KR,
    Peter Linn

  • How to find domain name for the host

    I have found the hostname but I am not able to find the domain name , how can I do that?? From the forums I was able to understand why the BSP Application was not displaying but unable to execute the same as I was unaware of the domain name.
    Thanks in advance.
    Regards,
    Narayani

    Hi Narayani,
    What about doing something like this?
    data: urls type tihttpurls2,wa type IHTTPURLS2, host type string.
    call method cl_http_server=>get_extension_info
    EXPORTING
    extension_class = 'cl_http_ext_bsp'
    IMPORTING
    urls = urls.
    concatenate sy-sysid '.' into host.
    translate host to lower case.
    loop at urls into wa.
    replace host in wa-host with ''.
    endloop.
    The idea is that you get all the possible URLs and then delete the host part of it. Then you get the domain.
    Eddy

Maybe you are looking for

  • Help need in ADF application security.

    Hi All, I need to implement the ADF application with authentication.Iam using jdeveloper 11.1.1.3.0 and Standalone WLS. I want to create group in WLS and map the user present in group for authentication. Any one please provide the tutorial link or vi

  • Credit check and Credit hold not working for 2 specific clients

    Hello dear Oracle Support, I would like to ask for your help in the following subject: The Credit deppartment assign a Credit Hold and a Credit Check for 2 specific customers, but for some reason, these check boxes are not getting respected by the sy

  • Does anyone know the value of "y" here

    //What is the value of y after the following switch statement is executed? x = 2; switch (x + 2) case 2: y = 2; case 4: y = 4; case 6: y = 6; default: y = y * 2; }

  • Error when searching

    Search works for most queries, but we recently ran into a query where it takes us to the error page.  Looking up the coorelation ID, I get the following: 03/25/2015 13:06:50.09 w3wp.exe (0x4264) 0x17E4 SharePoint Foundation General 8kh7 High Cannot c

  • Mobile Integration in ECC 6.0

    Dear Experts Is it possible for  IS Retail ECC 6.0 to have mobile intergration without Netweaver. Regards, Richa Grover