How to find the ITS and WAS host name

HI all,
I created one system in the portal .system admn->sysconfig->systems.
Now under the property catagories I selected ITS.
Now I have to enter ITS host name and port .How to get this host name and port from R/3.Can any body tell me the path from which transaction it will be available.
Similarly for WAS also.
Thanks in advance..!
Regards,
Krishna.

HI,
WAS Details
1. Goto se37 type : RSBB_URL_PREFIX_GET , execute ->
I_Handler class : CL_RSR_WWW_HTTP ->clear the I_message server entry -> execute -> WAS Details
ITS DEtails
1. goto se37 typr : RSBB_URL_PREFIX_GET , execute ->
I_Handler class : CL_HTTP_EXT_ITS ->clear the I_message
server entry -> execute -> ITS Details
EX: its path you will get a value like this
/sap/bc/gui/sap/its/....
use the values before its and like /sap/bc/gui/sap and ignore the rest

Similar Messages

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

How to find the WebUrl alert was raised for external network

I have two weburl's requestes to monitor under SCOM2007 R2
url one: https://www.asdftest.com
url two: https://www.lkjhtest.com
"url one" is configured to access the weburl from internal network and external network(internet) as well.
"url two" is not configured to access from external network(internet). only configured for for internal network.
I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
Q1). I am expecting an alert for "Url two" because it is not configured for external network access.
why i was not received any alert for that.
Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
Q3). Particularly how to find the Url alert was raised for external network
please suggest me and correct me if i am wrong.
Thanks in advance.

Hi,
Please refer to your another thread:
http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
Regards,
Yan Li
Regards, Yan Li

How to find the Project and wbs Element System Status

Hi all,
How to find the Project and wbs Element System Status.
We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
Regards
Raghavendra

Hi,
try table <b>jest</b> with key = prps-objnr
Andreas

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

How to find the font and replace another font using javascript in illustrator?

Dear All,
how to find the font and replace another font using javascript [batch process] in illustrator?
i have 700 image file, it very deficult replace one by one.
regards,
.Suresh.S

Ask the creator of the file for a unprotected version.

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

How to find the jre and j2ee version on RAD?

How to find the jre and j2ee version of RAD 6.0?

Hi Zhenglin,
You meen to say we have to create two custom fields, one each for the latitude and longituude. Once created, how do we upload the latitude and longitude based on address could you please expalin by giving some sample code.
Thanks in advance.
Thanks and regards,
Deepika C

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

How to Find the highest and lowest cell in a column and figure the difference

What I am tryng to do is have numbers find the high and low in Cloumn B and and put the difference in B6. So I would need it to Figure out that B3 is the highest and B2 is the lowest and give me the difference of .25 in B6

Don,
Begin by making Row 6 a Footer Row. You will find that option in the row tab menu that appears when you hover over the 6 tab and click the triangle.
Then enter this formula in B6:
=MAX(B)-MIN(B)
Regards,
Jerry

SMICM and WAS host name and port

Hi all,
Can someone please throw some light on the activity WAS host name and port in port... the question is:
Q. The information about host name and port is available in Tx SMICM, looking there in my case I find port 80xx whereas the portal runs on port 500xx. What value should we enter in the port field of "Connecting to a WAS system" in portal?
Is it what is given in SMICM or we should use 500xx?
Regards.

(80xx assuming you're starting Web Dynpro ABAP apps, integrated ITS and BSPs.)
Thanks Michael,
How about in case when it's not ABAP it's java apps i.e. when we are connecting BI to portal with SSO on dual stake. BI uses the 500xx port on FQDN and thus it's confusing me, whether to use 80xx or 500xx (when 500xx seems the port in use on BI portal).
Hope I made my point clear.
Regards.

How to find the paragraph and line numbers [CS3] [JS]

Hello,
I have a script that finds certain text formatting. Rather than having the script select all the instances of this text I have an alert that lists the page number and the contents for each found instance. The following gets those.
var pageNumber = myFoundSet[n].parentTextFrames[0].parent.name;
var foundContents = myFoundSet[n].contents;
However, I would like to include the number of the paragraph where the found text resides as well as the line number in that paragraph.
I am stumped on how to do this. Would be nice if there were a parentParagraph and a parentLine.
Can someone point me in a direction?
Thanks,
Tom

Tom,
Assuming that you're looking for the number of the paragraph on the page, you'd need to count the number of paragraphs in the text frame that a found item occurs in. Since indexes are always counted from the beginning of the story, you isolate the text between the top of the page and the found item by starting at the index of the first insertion point of the found item's parent text frame and the found item itself. You capture that with this single long line:
// range over ...
paragraph_number = myFoundSet[n].parentStory.characters.itemByRange (
   // ... index of first ins. point of found item's parent text frame ...
   myFoundSet[n].parentTextFrames[0].insertionPoints[0].index,
   // ... and index of found item
   myFoundSet[n].index
   ).paragraphs.length;
This includes any paragraph that started on the previous page. To find the found item's line number within its parent paragraph you do something similar:
line_number = myFoundSet[n].parentStory.characters.itemByRange (
   myFoundSet[n].paragraphs[0].index, //first insertion point of paragraph
   myFoundSet[n].index
   ).lines.length;
There's no need for parentParagraph and parentLine: myFoundSet[n].paragraphs[0] returns an item's parent paragraph, myFoundSet[n].lines[0], the item's parent line.
Peter

How to find the size (and sizelimit) BPS web interface

Hello.
We have build an application with the SEM-BPS webinterface builder.
In the past we had problems with the size off this application. After we had added some new tabs in the application the size limit had been exceeded and the web inteface could not been activated. So we had to remove the new tabs into a new webinterface.
Now we have to add again some new tabs into the webinterface application. That brings up some questions.
Wat is the sizelimit of the webinterface application?
Can we change this limit?
How can we know the size off the current application?
How can we find out the size of a separate tab in the webinterface? (So that we can make a prediction of the size which will be added to the web interface)?
Thanks and regards,
Eldo.

Trevor.Dennis wrote:
John, are there already differences? I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
The headline change was Retina support but that was also made available to non-Cloud versions.
Other Cloud-only changes in 13.1 are listed here
http://helpx.adobe.com/photoshop/using/whats-new.html
http://psd.tutsplus.com/articles/news/cs6_1/
Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes.

How JFileChooser finds the Desktop and can browse CIFS(SMB) in windows.

Hello.
I'm currently using serveral methods from FileSystemView used by JFileChooser to detect if a File is a system root, a floppy, or to find the "My Documents" folder under windows.
JFileChooser however is also able to provide a link to the desktop. How do I get that location from Java?
Further more. JFileChooser is able to browse and use resources located on the network using CIFS(SMB). I've searched through JFileChoosers source. But I can't figure out how it does this.
I'm currently writing a Folder synchronization app. As you can see in the screenshot ( http://users.telenet.be/greenhouse/Screenshot-7.png ) I'm trying to integrate the location browser (Look based on the GTK file browser) more into windows. I want my users to be able to browse CIFS just like in the JFileChooser. How do I do this?
The reason I'm writing my own browser is because the GTK one provided in Java is more then lacking. And I can provide browsing for remote resources more easily (like SFTP and SCP)
In short:
*JFileChooser however is also able to provide a link to the desktop. How do I get that location from Java?
*JFileChooser browses and uses CIFS in windows. How do I do this (without a 3th party library) the same way as JFileChooser does it?
Message was edited by:
finalbeta

JFileChooser fr = new javax.swing.JFileChooser();
        FileSystemView fw=fr.getFileSystemView();
        defaultfolder = fw.getDefaultDirectory().getPath();
       String desktopfolder;
        if(System.getProperty("os.name").startsWith("Windows")){
            for(File tmp:fw.getRoots()){
                dekstopfolder = tmp.getPath();
        }That piece of code gives the path to the desktop folder in Windows. In linux it returns root. (getRoots();) How horrible.
I hope I'm going about this the wrong way. Because this would be an ugly Java API.

How to find the ITS and WAS host name

Similar Messages

Maybe you are looking for