How to find the number views for a particular DB Table

Hi Friends,
   I would like to know the number of views(all) exists for a particular Data Base Table like MARA, MARC etc.,
Thanks in advance.
BaLu

Hi Balaji,
check this below link may be helpful for u
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecab446011d189700000e8322d00/content.htm
If u find it useful plz mark the points
Regards,
Naveen

Similar Messages

  • How to find the number of columns in an internal table DYNAMICALLY ?

    Hi,
    How to find the number of columns in an internal table DYNAMICALLY ?
    Thanks and Regards,
    saleem.

    Hi,
    you can find the number of columns and their order using
    the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = sy-repid
       I_INTERNAL_TABNAME           = 'ITAB'
       I_INCLNAME                   = sy-repid
      changing
        ct_fieldcat                  = IT_FIELDCAT
    EXCEPTIONS
       INCONSISTENT_INTERFACE       = 1
       PROGRAM_ERROR                = 2
       OTHERS                       = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif
    now describe your fieldcat . and find no of columns.
    and their order also..
    regards
    vijay

  • How to find the customer exits for a particular transaction

    hi
    how to find the customer exits for a particular transaction

    Hi jyothsna vankadari ,
    ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
    I would suggest you to go for BADI.
    Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    Now
    4) Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any transaction.
    Regards,
    Clemens

  • How to find the corresponding programs for a particular condition type

    Hi experts,
    I have one condition type( KSCHL ).
    I need to find the programs where this condition type is used.
    Thanks in Advance.

    Dear Nagireddy,
    You have to go further by using where-use list option(Arrow Direction Icon) from SE11 or from SE38 editor. Then the system will show you the places where the condition type KSCHL is being used.
    Thanks & Regards,
    Dinesh

  • How to find the Response time for a particular Transaction

    Hello Experts,
            Am implementing a BAdI to achieve some customer enhancement for XD01 Transaction . I need to confirm to customer that after the implementation and before implementation what is the response time of the system
    Response time BEFORE BAdI Implementation
    Response time AFTER BAdI Implementation
    Where can i get this.
    Help me in this regard
    Best Regards
    SRiNi

    Hello,
    Within STAD, enter the time range that the user was executing the transaction within as well as the user name. The time field indicates the time when the transaction would have ended. STAD adds some extra time on using your time interval. Depending on how long the transaction ran, you can set the length you want it to display. This means that if it is set to 10, STAD will display statistical records from transactions that ended within that 10 minute period.
    The selection screen also gives you a few options for display mode.
    - Show all statistic records, sorted by star
    This shows you all of the transaction steps, but they are not grouped in any way.
    -Show all records, grouped by business transaction
    This shows the transaction steps grouped by transaction ID (shown in the record as Trans. ID). The times are not cumulative. They are the times for each individual step.
    -Show Business Transaction Tots
    This shows the transaction steps grouped by transaction ID. However, instead of just listing them you can drill from the top level down. The top level will show you the overall response time, and as you drill down, you can get to the overall response time.
    Note that you also need to add the user into the selection criteria. Everything else you can leave alone in this case.
    Once you have the records displayed, you can double click them to get a detailed record. This will show you the following:
    - Breakdown of response time (wait for work process, processing time, load time, generating time, roll time, DB time, enqueue time). This makes STAD a great place to start for performance analysis as you will then know whether you will need to look at SQL, processing, or any other component of response time first.
    - Stats on the data selected within the execution
    - Memory utilization of the transaction
    - RFCs executed (including the calling time and remote execution time - very useful with performance analysis of interfaces)
    - Much more.
    As this chain of comments has previously indicated, you are best off using STAD if you want an accurate indication of response time. The ST12 (combines SE30 ABAP trace and ST05 SQL trace) trace times are less accurate that the values you get from ST12. I am not discounting the value of ST12 by any means. This is a very powerful tool to help you tune your transactions.
    I hope this information is helpful!
    Kind regards,
    Geoff Irwin
    Senior Support Consultant
    SAP Active Global Support

  • How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

    How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

    Dear Friends,
    I am absolutely agree with your answer .
    But my question is,
    Lets say.....
    One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
    So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
    Hope you all understood my requirement .
    Thanks & Regards,
    Aditya

  • How to find the number of references created for a given  object ??

    How to find the number of references created for a given object in a big application environment.
    That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

    Please do not post the same question multiple times.
    As for your original question, there is no direct way to do it.
    Especially not the way you phrased it,
    since objects don't have "names".
    Applications also don't have "names".
    They have classes and instances.
    Also, there are 2 related issues, and I'm not sure which one is the one you asked.
    #1. Finding the number of references to the same object.
    Eg.
    Map<String,String> a = new HashMap<String,String>();
    Map<String,String> b = new HashMap<String,String>();
    Map<String,String> c = a;In this case, there are only 2 objects.
    The first object has (at least) 2 references pointing to it.
    The second object has (at least) 1 reference pointing to it.
    (There may be more, if the HashMap library keeps
    references to these things, or if the HashMap object has
    some internal cyclic references...)
    If you're asking this, then it can't be done.
    It's an active research topic in universities
    and software research labs, called "alias analysis".
    Type it in google, and you'll see people are working hard
    and having little success so far.
    #2. Finding the number of instances created from a class.
    In this case, what you have to do is to add a counter to
    the constructor of the class. Every time an object is constructed,
    you increment the counter. Like this:
       class MyClass
           public static int counter = 0;
           public MyClass( )  { counter++; }
        // Then later in your program, you can do this:
        MyClass a = new MyClass();
        MyClass b = new MyClass();
        System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
    For every class you care about, you have to modify its constructor.
    Also: when an object is deleted, you won't always know it
    (and thus you won't always be able to decrement the counter).
    Finalizers cannot always work (read Joshua Bloch's
    "Effective Java" book if you don't believe me), but basically
    (1) finalizers will not always be called, and
    (2) finalizers can sometimes cause objects to not be deleted,
    and thus the JVM will run out of memory and crash

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

  • How to find next number range for project definition in tcode CJ20N

    Hai Experts,
          Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
    Note: I searched in forum before posting, but couldn't find the solution.
    Thanks
    Regards,
    Prabu S.

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • How to find the number of ODBC connections to Oracle Database

    Hi All,
    How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
    Thanks in advance,
    Mahi

    What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
    For example: if you already know of a user using ODBC, you can verify as:
    select username, osuser, terminal, program from v$session where username = 'SCOTT'
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
    SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
    Hope this helps...

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to find the number of links in a website

    hi every body
    can any one clear my doubt
    my doubt is that
    in a website how to find the number of links the hole website contains
    is there any navigation tool to find that
    plz help me yar
    i am waiting for the reply

    If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
    If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
    Hope this helps.

  • How to find the number of times method being called.....

    hi,
    can any one pls tell me how to find the number of times the method being called......herez the example....
    Refrence ref = new Refrence();
    for(int i = 0;i < arr.length; i++){
    if(somecondition){
    ref.getMethod();
    here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

    can any one pls tell me how to find the number of times the method being called......
    herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • How to find the number of fetched lines from select statement

    Hi Experts,
    Can you tell me how to find the number of fetched lines from select statements..
    and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
    Thanks in advance
    santosh

    Hi,
    Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
    For ex:
    data: itab type mara occurs 0 with header line.
    Select * from mara into table itab.
    Write: Sy-tabix.
    This will give you the number of entries that has been selected.
    I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
    Hope this helps,
    Sudhi
    Message was edited by:
            Sudhindra Chandrashekar

  • How to find the number of occurance of a string in text field of Infopath form?

    Hi All,
    In Infopath text field, How to find the number of occurrence of a particular string in that field?
    Thanks in advance!

    You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
    Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
    Example:
    String: "1"
    Box A - "123451234512345"
    Box B - "23451234512345"
    Box C - "2345234512345"
    Box D - "234523452345"
    etc.
    We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Maybe you are looking for