How to find the old BDoc errors in CRM Middleware

Hi,
Can we find the error BDocs in the past. Please do let me know the way to find out.
e.g. I want to find 3 months prior to the current date.
Thanks and Regards,
Ramana Rao.

Hi Denis,
Thanks for the update and I have checked this for the older date.
Is there any way to find out why a material is not replicated to the CRM from ECC.
I am not able to find any BDoc error (any state of the BDoc) with ref to the PRODUCT_MAT.
Our main issue is some of the materials are not replicated and some of them don't have the
descriptons. As a first step of action we pulled the data from ECC to CRM as a request download but want to investigate the reasons for this.
Secondly there are some changes done at the product hierarchy or category levels (reorganize)
in this case what kind of issues we might come across? Is there any action list that we need to do at the time of hierarchy or category changes to the Material master in ECC or in CRM.
Kindly share your inputs.
Thanks and Regards,
Ramana Rao.

Similar Messages

How to find the cause ofan error at runtime in forms (10g)

hi
can u please tell me how to find the cause ofan error at runtime.
in forms 6i, the shortcut key is shift+f1
i needthe shotcut key in 10g forms.
thanx

or just look in you menu help, -- last error or you can find the list of shortcut keys there ...
\Erwin

How to find the List of Errors occured while Upgradation

Hi All,
I am working on Upgrade Project from 4.7C to ECC 6.0. I need to find out the list of all errors occured custom objects while doing Upgradation. I heard abt tool Uptimizer but our company is not using that tool, is there any other way to find out the list of errors.
Can anyone please give me some suggestion how to proceed further tht would be great help.
Regards
Yathish

Most of the development issues can be identified by SAMT and UCCHECK in the upgrade sandbox. There may be a small percentage of runtime issues not identified but they will be covered during the testing phase.
-Cheers

Hello please tell me how you can unlock the phone I bought İclod worker can not find the old vledeltsa. sorry English is not good, I know

Hello please tell me how you can unlock the phone I bought İclod worker can not find the old vledeltsa. sorry English is not good, I know

If it's locked to the previous owner's account then only he/she can remove it from their account : http://support.apple.com/kb/TS4515

How to fix the old Apple Moble Device Support?

How can I update or reinstall iTunes if it always stops due to not being able to find the old Apple Moble Device Support. I've tried to manually or use the auto update and it always stops saying the Apple Moble Device Support can't be found. I've tried to remove the program, two are listed in the windows add/remove, but I just get "The feature you are trying to use is on a network resource that is unavailable."
I can't find it anywhere to add, remove or repair. I uninstalled iTunes hoping to start fresh but now it won't install again for he same reason. Now I have NO iTunes, old or new.

I've tried to remove the program, two are listed in the windows add/remove, but I just get "The feature you are trying to use is on a network resource that is unavailable."
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How to delete the old code in the EXIT_SAPLRSAP_001

Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
Narendra

Hi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to remove the old email address that was hacked from my iCloud account when iCloud won't let me?

How to remove the old email address that was hacked from my iCloud account when iCloud won't let me?
Pretty much the the email that I used (but didn't verify) to create my iCloud account was hacked and now I can't remove it from my iCloud account due to the iCloud password also being changed by the same person and the fact I had "Find my iPhone" app on my phone also??? I had to change my iTunes email as well but that was far easier so yeah :S.
Please help. I live in NZ, out in the country, so reception is rare and so is getting into the nearest town that has an Apple Store.
Thanks

If you truly change your existing Apple ID's email address to a new email address, follow these instructions: iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
If you created a whole new Apple Account because you couldn't access the old one after being hacked, you will need to contact the Apple Account Security Team. Apple ID: Contacting Apple for help with Apple ID account security

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it

Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it

Hi Caveman337,
Welcome to the Support Communities! The resource below will explain how to delete an old iTunes backup. Before you do this, I would suggest creating an iCloud backup of your iPhone.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
http://support.apple.com/en-us/HT203977
Back up using iCloud
If you're using iCloud, it can automatically back up your content. Use these steps to turn on iCloud Backup:
Tap Settings > iCloud > Backup. If you're using iOS 7 or earlier, tap Settings > iCloud > Storage & Backup.
Tap iCloud Backup to turn it on.
Tap Back Up Now.
After you turn on iCloud Backup, iCloud will back up your content automatically. You can return to this screen to see when the last back up happened.
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
http://support.apple.com/en-us/ht4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Delete a backup
If you want to delete a backup created by iTunes:
Open iTunes Preferences:
Mac: Choose iTunes > Preferences.
Windows: Choose Edit > Preferences. Learn how to turn on menus in Windows 7 and 8.
Click Devices. (The iOS device doesn't need to be connected.)
iTunes will show the phone number, International Mobile Equipment Identity (IMEI) number, and serial number of the backed up iPhone when you position your mouse pointer over a backup. (Only the serial number will be shown for iPad and iPod touch). You can use this to find the backup you want to delete.
Select the backup you want to remove.
Click Delete Backup.
When prompted, confirm that you want to remove the selected backup by clicking Delete Backup.
Click OK to close the iTunes Preferences Window.
Backups that have a date and time stamp in the backup name are copies of backups created by restoring the iOS device. The date and time in the left column are when the restore-from-backup occurred. The date and time in the right column are the last synced date; this shows how current the data is.
I hope this information helps ....
- Judy

How to find the size of an arrayList through Expression Builder.

Hai OTN,
How to find the size of an arrayList through Expression. I have a managed bean in View Scope.I am using Jdeveloper 11.1.1.2 with ADF Faces components.
Managed Bean :
ArrayList<IllnessEmployeesObj> employeeGridList =
new ArrayList<IllnessEmployeesObj>();
JSPX :
Value="#{viewScope.PandIVH.employeeGridList.size}"
Error : java.lang.NumberFormatException: For input string: "size"

Hi Dinil,
I have provided you with a sample that would show you the how you can get the size of an arraylist
the sample has a page untitled1 and a bean named test.
I have run in on jdev 11.1.2 and it is ok, it will be ok on 11.1.3
after running the sample you will see the 2.
please remember that you must add the JSTL taglib on the viewcontroller.
just right click on viewcontroller, go to tag lib select the jstl.
page
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsp/jstl/functions" prefix="fn"%>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
<title>untitled1</title>
</head>
<body>
<h:form>
<h:outputText value="#{fn:length(test.a)}"/>
</h:form>
</body>
</html>
</f:view>
bean
import java.util.ArrayList;
public class Test {
public Test() {
a= new ArrayList();
Object o=new Object();
a.add(o);
a.add(o);
ArrayList a;
public void setA(ArrayList a) {
this.a = a;
public ArrayList getA() {
return a;
I hope this sample came handy.
regards,

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

How to find the Data source name on linux server

Hello All,
Good Morning...
I created a rpd in my local machine and deployed on the server through Fusion middle ware.
and copied the catalog file there in the server.
While working on my local machine I have two odbc connections... one is for development and other is for production.
at the time of deployment to the server I changed the development instance to production instance throught the connection pool.
I am encountering the following error while working on the analyis....
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
I think this is because of the mismatch of the datasource name in server and my local machine...could you please tell me how to find the datasource names on the server?
Thanks!

Hi Dpka-
I created two ODBC connections in my system.
one for development and another for Production.
while deploying the rpd to the server I changed the development login credentials with production login.
The problem here is I just want to know whether Iam giving the same datasource name which was presented on the server or not.
I don't have access to the server now.
Is there any way to find out the datasource names which were presented on the server with the help of admin console?
Thanks!

How to find out where sap error messages stored...

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Hi,
I also got the same message when that message no is not there
E:SABAPDOCU:000 test
yours is S-type and message id ZY and message no 127
127 is not there either change the no or create the same
Regards
Shiva

How to find the old BDoc errors in CRM Middleware

Similar Messages

Maybe you are looking for