How to find the one Sold to customer have multiple ship to assinged
HI Folks,
Please help me how to fnd one sold to have multiple ship to' s assinged through table search not by looking Xd02 screen.
<<Text removed by moderator>>
Regards,
Ram.
HI
You can use the table KNVP here enter the
KUNNR
VKORG
VTWEG
SPART
and PARVW as SH
You will get all the ship to parties assigned to Sold to Party
regards
Similar Messages
-
How to find the contacts of a Customer
Hi
I am new to this Module,
Can anyone help me out with the tables (or) Query to find the Contacts of a Customer in PO.
Thanks909577 wrote:
Hi
I am new to this Module,
Can anyone help me out with the tables (or) Query to find the Contacts of a Customer in PO.
ThanksI think you mean supplier contacts..if yes..
po_vendors
po_vendor_sites_all
po_vendor_contacts
You should check these tables
Mahendra -
How to find the deliveries which does not have Carnot and SHPCON
I have a scenario where for some of the deliveries no CARNOT idoc or SHPCON idocs were not been created or went into error, i have verified it in by going to we05 and found there were many idcos in error and some of the idocs were been set to status 68 and they were manually processed by users. is there any table where i can extract the deliveries which does not have SHPCON idocs created.
hi,
you have to take two steps in this:
first step:
Table EDIDC which contains EDI Control records.
which stores the partner number,partner functions & message types.
2nd step:
take that partners and get deliveries from LIKP table.
regards,
balajia -
How to find the relevant query if I have only bookmark ID ?
Hi Gurus,
I have an issue now, I have only a Bookmark ID and want to know the corresponding query, can you tell me the methods ?
Thanks
LeonHi Leon,
when you are giving Bookmark ID corresponding to that query properties will display there you can check the technical name of your respective querey.
Try this it will works.
Regards
Suresh B.G. -
How to publish just one site if you have multiple?
I've searched and nothing seems to be quite covering this question, although I admittedly am not the most patient of searchers...
So, I have about 5 sites in my iWeb. I'm trying to publish *one site* to a folder on the hard drive so I can then use my FTP client to publish to my site. Everytime I've done this (published to a folder), iWeb republishes all of my sites, and some are quite large. Anyway around this or am I missing something? I was considering just deleting my old sites from iWeb, but that seems a bit extreme.
Please help, macster gurusHi Audrey, Bear in mind that I haven't tried this myself, but anyway: How about setting up a different User Account on your Mac for each site that you want to publish separately? ...You would then login as the particular user for the site you want to work on and iWeb would then operate on its unique Domain file in:
Username/Library/Application Support/iWeb
To divide up your current multi-site Domain, I suppose you would have copy it to the above location for each new user account you set up. Then in iWeb delete the sites you don't want that user to control. (Backup your Domain file somewhere safe before embarking on this.)
Adding a new user account to your computer...
You can create individual user accounts for each person who uses your computer. Each new user has a separate home folder and can adjust his or her own preferences without affecting other users.
1. Choose Apple menu > System Preferences and click Accounts.
2. If some settings are dimmed, click the lock icon and type an administrator name and password.
3. Click Add and type the user's name.
4. If you don't want to use the short name generated automatically, type a new short name. (Once the account is created, you won't be able to change the short name.)
5. Type the user's password in the Password and Verify boxes.
6. Type a hint to help the user remember the password if they have trouble remembering it at login. -
How to find the list of Queries for that have statistics enabled in the sys
Hi ,
How to find the list of Queries that have statistics enabled on them in the system.
Please help me in this regard
Thanks
Maruthihi ,
I found three options there like
X - on
D - Default
off
can you please expalin the difference between on and Default
Thanks in Advance
Maruthi -
How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?
Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya -
How to find the FND_PROFILE.VALUE(ORG_ID) in custom apex schema
Hi,
How to find the FND_PROFILE.VALUE('ORG_ID') from dual in custom schema......
Actually I have integrated Apex 4.2 version with EBS r12
select FND_PROFILE.VALUE('ORG_ID') from dual ; in apps schema I m getting 198 value
but the same query(select apps.FND_PROFILE.VALUE('ORG_ID') from dual ) in custom schema (XXCVBB) returning null value..
Is there any pre steps I have to do...
kindly provide the useful inputs to retrieve the profile value..........
Regards,
PavanHi,
fnd_profile.value('ORG_ID'); will fetch you value only if there is a organization assigned to any application [or only if its a single Org], being it custom application you should have used set policy context or mo_global.init to populate the global temporary table which will hold all the Org's which that specific user has access too.
in your custom code use MO_GLOBAL.SET_POLICY_CONTEXT('S','ORG ID WHICH YOU NEED TO SET');
after setting the policy context, you should be able to see value from fnd_profile.value('ORG_ID');
Hope this Helps!!
MO_GLOBAL.SET_POLICY_CONTEXT
This procedure has two parameters
p_access_mode
Pass a value "S" in case you want your current session to work against Single ORG_ID
Pass a value of "M" in case you want your current session to work against multiple ORG_ID's
p_org_id
Only applicable if p_access_mode is passed value of "S"
MO_GLOBAL.INIT
Purpose of mo_global.init :-
It will check if new Multi Org Security Profile is set, to decide if new Security Profile method will be used.
If the new MO security profile is set, then mo_global.init inserts one record, for each Organization in Org Hierarchy, in table mo_glob_org_access_tmp
Regards,
Yuvaraj -
I have a smartmail box and a 1 in a bubble next to it. I see no new emails to read so how do I find the ONE it says is there? if it is a glitch, how do I get rid of that bubble?
Try rebuilding the mailbox.
First select the offending mailbox. Then click on Mailbox in the menu bar, and select Rebuild. If the bubble goes away, it was a glitch. If it does not go away there is one unread message in that Mailbox.
To find that one:
In Mail, go to View / Sort by / Unread. That should bring the unread email to the top of the list. -
How to find the 1(one week) performance of the system
HI every one
in my recent interview he has asked this question
i have checked the sar options through man pages but i couldnt understand ...
can any one please tell me how to find the on week performance report of a system......
please tell me how i can find the performnace reports
Thanks in AdvanceHi.
crontab -l sys
Show, activated or not collecting of performance statistics.
man sa1
The shell script sa1, a variant of sadc, is used to collect
and store data in the binary file /var/adm/sa/sadd, where dd
is the current day.
So you need found file with correct date in /var/adm/sa
Regards. -
How to find the Source Table in one corresponding schema?
Hi All,
How to find the Source Table in one corresponding schema?
regards,
DBDB wrote:
Hi All,
How to find the Source Table in one corresponding schema?
regards,
DBHUH?
I do not understand your question
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
How to find the customer exits for a particular transaction
hi
how to find the customer exits for a particular transactionHi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens -
How to find the objects created in last one year
Hi Experts,
How to find the objects created in last one year.
Thanks in Advance,
Iffhi
just go through this table.
<b>TADIR</b> object as 'PROG'
in this you can also provide the authors name in AUTHOR field
and
<b>TRDIRT</b>
reward points if it helps,
regards, -
Re : How to find the Account Group for a Customer
hi
i know the Sale Area ( Sales Org,Dist Channel & Division), Company code but when i go to XD01 TO create a Customer it is asking for a Account Group.My Question is how to find the Account Group
& is there any link between Sales Area and the Account Group?
RegardsHi murali,
Account group makes the fields in the customer master data as
1. suppress
2.req. entry
3. opt. entry
4.display
the above 4 are the radio buttons available.
Before u create the customer master in XD01.
you must gothrough the following paths to create xd01
Img->Fin.Accouting->AccountRec & Account Payable->Master data ->prepare for creating customer master data
In the above path
I. define account groups
In this you cretae your own account group
II. create number ranges for customer accounts
In this maintain any number range
III.Assign number ranges to customer account group
in this Assign the number range here.
Now go for XD01
select the account group you created.
Give the customer number,this number must be in the range that u made in the above II point. -
How to find the customer ledger account display for profit centerwise
Dear All,
how to find the customer ledger account display for profit centerwise
Pleas give your valuable suggestion
Regards
Vishwajeet SharmaHi
check the tables
A959
A962
A997
The assignment depends on so many things
with respect to which transaction you wants the PRCTR field for KUNNR?
Regards
Anji
Maybe you are looking for
-
ERROR,11 Feb 2009 15:39:42,453,[XELLERATE.JBOSSLOGINHANDLER],Error in creating l ogin context javax.security.auth.login.LoginException: java.lang.NoSuchFieldError: TRACE at org.jboss.logging.Log4jLoggerPlugin.isTraceEnabled(Log4jLoggerPlugin. java:85
-
Drop down/drill down for the report
HI I have a requirement to have a kind of drop down menu on the heading level. So that if the data is say sales by model, on the invoice_date column, the user would have the option to look at this weeks' invoices, this months, etc. I know there are P
-
How to get BIW with NW ABAP7.0
Hi Frndz.. Actualy am NW EP deveolper , now i started to learn BI and i installed NW ABAP 7.0 Trail version .In this i found BIW and let me suggest this BIW(coming with NW ABAP7.0 Trail) is enough to learn BI. To conform this i given a Tcode RRMX , i
-
Importing referenced images into the Aperture library
I've searched and seen related questions but not this one exactly. I have images that I unknowingly (new aperture user) imported as referenced files. Now I'd like to import them into the aperture library without loosing ratings, etc so that they are
-
I was surfing online when suddenly my mac just freeze. So i had forced shut down it and turned it on again but then the folder with questionmark icon shows up. And i pressed (option key) to go to the utility but i cant find my startup disk anywhere!