How to find the parent_patch for a bug
--> I checked from ad_bugs and it's showing patch 123 has been applied.
-> I checked the same 123 patch in ad_applied_patches. It's giving no rows selected.
Pls. suggest, how can we find the parent patch through which bug 123 was fixed.
Hi;
You can search patch in metalink patches part, if this patch cover in RUP patch or some other patch you can see which patch is parent_patch. Otheway is if you have patch list on your excel you can check applied date wiht your patch.
Some patch comes wiht default installation also, thatswhy i belive there is no specific answer for your quesiton to define to find parent_patch
Regard
Helios
Similar Messages
-
How to find the patches for perticular concurrent program
HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank'sQuery the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026 -
HOw to find the text for PERSK field in infotype 0001
hi all
HOw to find the text for PERSK field in infotype 0001Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan -
Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?
Hello there, g0ddess.
The following link proves to be a great resource to get started with Apple Training and Certification:
Training and Certification
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How to find the Ranges for a field ?
Hello All,
Can anyone tell me how to find the ranges for a field.
<b>1</b>, i.e say I want the Ranges Structure for the field LIFNR.
The ranges structure for this is "<b>RANGE_LIFNR</b>".
This I used in my Program since I know it previously.
But now I want the ranges structure for the field <b>VBELN (Delivery Document).</b>
I don't know what is it !!!!!
<b>2</b>, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.KHi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy -
How to find the SteroMixer for my HP TouchSmart PC
I just need to know how to find the SteroMixer for my HP TouchSmart. I did read previous concern and also followed the steps but under my hardware it shows this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E&REV_1004 and this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E.
I just need to know which do I use so that I will be able to add music to the CamStudio...
Maybe this helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01461692&cc=us&dlc=en&lc=en
or try them here.
http://h30434.www3.hp.com/?lc=en&cc=us
http://answers.microsoft.com/en-us/windows
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
How to find the workflow for Change Request for the PO's
Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
SoniaFor 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here' -
How to Find the Runtime for any workitem.
Hi,
Could you please tell how to find the runtime for any workitem.
Thanks,
Bhanu Gattu.Hi,
I think, your query is pertaining to Workflow.
Please explain your requirement little more.
If you need Runtime Analysis: Then the transaction Code: SE30 must be used.
Thanks.
RamaniN
Edited by: Ramani Nagarajan on May 21, 2009 12:33 PM -
How to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPL
Hi ,
how to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPLRSAP_002 ?
I need to extend the Datasource 0PLANT_ATTR with RSAP0001 in EXIT_SAPLRSAP_002.
In Table ROOSOURCE I do not have an entry for 0PLANT_ATTR.
How can I identify the extractstructure for 0PLANT_ATTR ?
Thanks !!!
MartinHi Martin
Go to RSA6 and do a find for Plant attr and from there you will find the extract structure: BIW_T001WS.
You can add the fields here and then using CMOD/Exits you can write the code to populate the data.
Thanks
Kalyan -
How to find the IDOC for the archived message in integration engine
Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh -
How to find the definintion for a particular implementation
hi
ihave the implementation name so i put this in se19
and after enter it asks for definition which has to be created in se18
if we have some predefined definitons already for that implementation
how to find the particular definiton that is to be usedPut that implementation name in the enhancement name option of SE18 and press display. I hope by implementation you dont mean the Z Include.
If it is Z include then look for where use list of that and pick the Enhancement name from there.
Regards,
Amit -
How to find the Datasources for the given table names ?
Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
SrinivasHi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM -
How portal finds the vale for the sap-language parameter for iView
In the portal one of the ABAP WebDynpro iView is getting displayed in German. The reason for that is the sap-language parameter is being passed as DE. All other iViews in the system are passing the sap-language parameter is as en.
In our system the Logon Language property is blank for the all the iViews. Could you tell me why one specific iView the sap-language is being passed as a DE?
How the portal finds the value for the sap-language parameter?Hello Venkata,
Check if your Component locale is set to DE.
Component locale
This locale is defined by the following component profile properties:
--ForcedRequestLanguage
--ForcedRequestCountry
Check this for more:
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/938297a5061d69e10000000a1553f6/content.htm
Greetings,
Praveen Gudapati
p.s Points are always welcome for helpful answers -
How to find the reason for a job failure
Hi,
I have created a job .
It was running fine. But after few days it showed the status as broken.
How do we find the reason for a job failure ?
Thanks.There should be a trace file in the either the udump or bdump (depending on Oracle version) directory on the DB server. If the job is broken it has probably failed 16 times, so you should have 16 trace files - each possibly showing the same error. The relevant trace files will have j00 in the name, showing that they were generated from dbms_job.
Ben -
How to find the BAdi for an Enterprise Service
Hi All,
I am using an standard ES by SAP CashPointPaymentCreateNotification_In
I have to write some code in this hence trying to find the BAd
How can I find the BAdi for this ES?
regards,
PiyushHi,
First fidn out this service operation falls under which ES bundle. You can see all the ES bundles at this location:
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=B93B737648B94D26A01F85CC8C46510A&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=
Then once you find the operation "CashPointPaymentCreateNotification_In" click on it and it will giev you all the technical details including the BADI names that can be implemented for this.
Regards,
Pragati
Maybe you are looking for
-
How can I adjust the entire table in the middle of the file before printing?
I had a file and want to print it out. But the margin seems a little bit strange, and I want to move the whole table into the very middle of the paper ready for printing (as A4 size). Is there any one who knows how to deal with this issue? Thanks.
-
Finally using SPAM quarantine and want to know how many e-mails are being released
We have two C660s and one M660 and we are finally using the SPAM quarantine functionality on the M660 and so far it has been awesome. For my pilot group I have the spam thresholds set as low as recommended by the GUI at 50 (positive) and 25 (suspec
-
Calculate tab for form field properties
This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/X/pro/using/WS4516ED9A-07B3-46c7-B547-E083678A2D44.w.h tml
-
Does Nokia Gig Finder work with Belle FP1?
Has anyone tried Nokia Gig Finder with Belle FP1 to see if it works since it does not with regular Belle? I only have an N8 so I can't try it.... yet. White 808 Pureview NAM Black N8 NAM Silver N95-3 NAM
-
Verify by Visa does not fit in the window
The Verify by Visa page is too big for the window as a result one cannot enter all the security information to complete the purchase the only way to make purchases is to use something like Internet Explorer for online shopping - Verify by Visa works