How to find the power-on password for hp cnd741sdz

Hi, need help for an hp cnd741sdz displaying a power-on password key

Welcome Chamuraq.
Read my post here.
http://h30434.www3.hp.com/t5/Notebook-Recovery/HP-530-BIOS-password-reset/td-p/2677777
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

What is CPI-C and how to find the username and password for a 4.7c install

Dear Friends,
Please tell me what is a CPI-C username is ??
When do we use it?
And how/from where could I find the CPI-C user name and password of a particular system(4.7c)?
Please give me a detail knowledge.
waiting for replies ....
thx,
jeevan

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
This question was solved.
View Solution.

Hi,
From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

Cannot find the Power Led connector for JFP1 to connect on K8N Neo FSR

Hi,
I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
I can't even get a start: if I click on "Power" I just get a red light under the Power button for 1 second and nothing start.
This may be related with the fact that I did not find a "Power LED" connector for JFP1 (I have connected all the others connectors, including the Power LED one for JFP2).
Thank you in advance for your help.
Precisions:
At the beginning, I had forgotten to connect the ATX 12V power connector on JPW1.
After having done that without getting an improvement, I did a Clear CMOS (after having unplug the power cable).
Now the CPU fan begins to turn just when I switch the power on from back of the case (and not from the power button) and stops turning after five seconds.
Sometimes, I get an orange light during 1/2 second on the D-bracket LEDs.

Quote from: Dr Stu on 20-November-05, 04:36:29
evidently if he fixed it, the solution was posted elsewhere
so what have you tried so far? has this system ever worked?
post your PSU specs. try powering up board outside the case in case there is a short somewhere
I have tried a different power unit, different JFP1 configerations, removing and replacing MB battery, changing the jumper settings on JBAT1 to clear CMOS.
Everything is just dead, no power anywhere. I get the fan light inside the Power unit to light up for 1 second when i connect the power cable and thats it. Its a 450 Watt power unit so it should be plenty. Maybe i will try removing the board and starting it that way.
This system has never worked, i just built it.

How to find the Adobe barcode name for its corresponding SAP Script barcode

Dear All,
We are doing conversions from SAPScript to Adobe forms.
The barcode used in two sapscript forms are 'BC_CD39' and 'ARTINR' respectively .
I would like to know the corresponding barcode name to be assigned to Adobe forms as the above barcode names are not present in the Object Library-> Barcode section of Adobe forms.
regards,
PP

>
Muralidhar Medisetty wrote:
> Hi,
>
> I had an issue, in the transaction F110 Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
>
> Thanks in advance.
hey
NACE is the transaction ..for this u must know the output type..
Script for Cheque Printing and Payment Advice can be known from Transaction FBZP...
FBZP -> paying Company Codes -> u will get Script used for Payment Advice
FBZP -> Pmnt methods in company code -> u will get Script used for Cheque Print
....Give points if useful.....
Edited by: Satyabrata sahoo on Oct 14, 2008 4:42 PM

How to find the list of Queries for that have statistics enabled in the sys

Hi ,
How to find the list of Queries that have statistics enabled on them in the system.
Please help me in this regard
Thanks
Maruthi

hi ,
I found three options there like
X - on
D - Default
off
can you please expalin the difference between on and Default
Thanks in Advance
Maruthi

How to change the default admin password for IAS/UDDI

Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
How to change the default password
ias_admin/ias_admin123
http://xxx.xx.xxx.xx/uddi/publishing

Hello NJ,
I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
Thanks

How to find the name of query for a given report

Hi All,
I am having the name of a report and i need to find out the name of query for that report . Plz tell me how to find out the name of the query for a given report.
Thanks.
Regards,
Pooja Joshi.

Use this FM
RSAQ_DECODE_REPORT_NAME
This FM takes program name as I/P and gives Query Name as O/P.
This FM uses the structure AQADEF to fetch the data.
Hope this helps.
Regards
Vinayak

How to find the list of WDAs for IS Retail?

Hi all
I did some basic search on SDN to find all WDA components SAP will predeliver on the installation of IS-Retail. I could not find useful links. Does anyone know how to find it? Also would like to know the SAP roadmap on the WDA apps that will be built in the future.
The idea is when I go to a customer for IS Retail implementation I should be able to tell him if he can get out of the box browser based UIs. Please let me know a way to find it.
Regards
LNV

Hi
Thanks. Not exactly that I wish to see. Yes I would need to know the technical components but only after understanding at a more broader level what SAP offers in terms of pre built UI (WDA) for retail scenarios. Do you see what I want? SAP offers pre built UI for ESS MSS, what is available similarly for Retail?
Thanks.
Regards
LNV

Need to know how to find the last execution time for a function module

HI all
I need to know
1) How to find out the last execution time of the function module ?
say for eg. I have executed a func. module at 1:39pm. How to retrieve this time (1:39pm)
2) I have created 3 billing document in tcode VF01 i.e 3 billing doucment no. would be created in SAP TABLE "VBRP" b/w 12am to 12:30 am.
How to capture the latest SAP database update b/w time intervals?
3) Suppose I am downloading TXT file using "GUI_DOWNLOAD" and say in 20th record some error has happened. I can capture the error using the exception.
Is it possible to run the program once again from 21st records ? All this will be running in background...
Kindly clarify....
Points will be rewarded
Thanks in advance

1.Use tcode STAT input as Tcode of Fm and execute .
2. See the billing documents are created in table VBRk header and there will always be Creation date and time.
VBRk-Erdat "date ., u can check the time field also
So now if u talk the date and time we can filter then display the records in intervals.
3. with an error exeption how is my txt download finished .
once exception is raised there will not be a download .
regards,
vijay

How to find the power-on password for hp cnd741sdz

Similar Messages

Maybe you are looking for