How to find the program for append structure upload

Hi all,
I am facing a issue that one Char. in a ODS, I have found the source field for this Char. in R3 in a extract structure. But this field locates in an appended structure, so this means the value of the field must be updated by ABAP. My question is How I can find the ABAP program(BADI or User exit?)
Thanks
Leon

Hi,
First u identify the type of DS, then according to the type of DS, go to CMOD, provide the project name then select the enhancements there it will display the four Exits, select the appropriate one,
if DS is of Type,
Transactional - EXIT_SAPLRSAP_001
MD ATTR - EXIT_SAPLRSAP_002
MD TEXT - EXIT_SAPLRSAP_003
MD HIER - EXIT_SAPLRSAP_004
double click on the particular one then select the include program there u will fild the code fro all the DSs.
Hope this inflammation help u.............
Assinging Points is the way of saying Thanks in SDN
Regards
Ramakrishna Kamurthy

Similar Messages

  • How to find the patches for perticular concurrent program

    HI
    How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
    Thank's

    Query the concurrent program in Sysadmin responsibility.
    Note the concurrent executable.
    Query the concurrent executable in Sysadmin.
    Note the file name.
    If it is a package, open the package in TOAD and note down the file name.
    If it is a report/form, open it in form developer and note down the file name.
    Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
    Hope this answers your question
    Sandeep Gandhi
    Independent Consultant
    513-325-9026

  • How to find the Ranges for a field ?

    Hello All,
               Can anyone tell me how to find the ranges for a field.
    <b>1</b>, i.e say I want the Ranges Structure for the field LIFNR.
        The ranges structure for this is "<b>RANGE_LIFNR</b>".
        This I used in my Program since I know it previously.
        But now I want the ranges structure for the field <b>VBELN (Delivery Document).</b>
        I  don't know what is it !!!!!
    <b>2</b>, Is there any procedure to know the ranges structure for a particular field ?
    Regards,
    Deepu.K

    Hi Deepu,
    Using 'Where used list' you can able to find out RANGES tables.
    For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
    If you using a program defined as shown below.
    DATA: r_vbeln type ranges of vbeln.
    The above statement also creates ranges structure in Runtime.
    Procedure finding range table structures
    go to SE37 -> Enter domain or dataelement value
    Go to where used list --> search for 'Structures'
    After getting all structure  --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
    You can get all ranges tables in the search window
    If helps plz reward points.
    Regards
    Bhupal Reddy

  • How to find the program name of the created sap query ?

    how to find the program name of the created sap query ?

    Hi avinash,
    Try in this way..
    Go to SE16 and then go to table TSTC.
    in that give program name as <b>*followed by your query name</b>
    (for example *TESTQUERY)
    and run , that will give progname======queryname.
    this way you can find program name.
    vijay

  • How to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for  EXIT_SAPL

    Hi ,
    how to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for  EXIT_SAPLRSAP_002 ?
    I need to extend the Datasource 0PLANT_ATTR with  RSAP0001 in  EXIT_SAPLRSAP_002.
    In Table ROOSOURCE I do not have an entry for 0PLANT_ATTR.
    How can I identify the extractstructure for 0PLANT_ATTR  ?
    Thanks !!!
    Martin

    Hi Martin
    Go to RSA6 and do a find for Plant attr and from there you will find the extract structure: BIW_T001WS.
    You can add the fields here and then using CMOD/Exits you can write the code to populate the data.
    Thanks
    Kalyan

  • I get a message that itunes  has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for  that file

    I get a message that itunes  has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for  that file

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • How to find the program name of the smart form?

    How to find the program name of the smart form if output type is not known?
    thanks in advance...

    How to find the program name of the smart form if output type is not known?
    thanks in advance...
    T-code SE16
    Enter table name: TNAPR  -> Press enter key
    Enter smartform name in input field(SFORM):  Z_your_smartform_name
    Execute
    you can find  program name under the column PGNAM/Program name.
    Regards
    sudheer

  • HOw to  find the text for PERSK field in infotype 0001

    hi all
    HOw to  find the text for PERSK field in infotype 0001

    Hi
    T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
    ..lakhan

  • Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

    Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

    Hello there, g0ddess.
    The following link proves to be a great resource to get started with Apple  Training and Certification:
    Training and Certification
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How to find the SteroMixer for my HP TouchSmart PC

    I just need to know how to find the SteroMixer for my HP TouchSmart. I did read previous concern and also followed the steps but under my hardware it shows this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E&REV_1004 and this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E.
    I just need to know which do I use so that I will be able to add music to the CamStudio... 
     

    Maybe this helps.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01461692&cc=us&dlc=en&lc=en
    or try them here.
    http://h30434.www3.hp.com/?lc=en&cc=us
    http://answers.microsoft.com/en-us/windows
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How to find the workflow for Change Request for the PO's

    Hi All,
    We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
    what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
    Your input will be highly appreciated.
    Thanks in advance
    Rgds,
    Sonia

    For 11.5.10.2 run this query to determine the keys to search on:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
    Then use the keys returned by the query to look up the Workflow in
    Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
    Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
    The query for change requests on a specific Requisition would be:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

  • How to Find the Runtime for any workitem.

    Hi,
    Could you please tell how to find the runtime for any workitem.
    Thanks,
    Bhanu Gattu.

    Hi,
    I think, your query is pertaining to Workflow.
    Please explain your requirement little more.
    If you need Runtime Analysis:  Then the transaction Code: SE30 must be used.
    Thanks.
    RamaniN
    Edited by: Ramani Nagarajan on May 21, 2009 12:33 PM

  • How to customize the program for maximum performance on my system?

    How to customize the program for maximum performance on my system?
    My system: i7-5820k processor, motherboard msi x99s gaming7, DDR4 RAM 8GB ,videocard MSI 970/

    What program?
    Mylenium

  • How to find where the code for append structures for LIS extractors?

    Hi,
    I found 4 append structures for extractor 2LIS_03_BF,
    Out of 4 append structures, I found code for one, using where-used option. But in vain for other 3. Is it possible they didn't transport the code for remaining structures? how to find that?
    Cheers,
    Kannan N

    Kannan,
    When ever you apply a logic to populate tdata for the appended filed then you will be writing some code in CMOD transaction code where you will find a ZXRSAU01
    program, just double click on that then it will take you to the complete exit. Ther you can find with your data source name.
    Hope it helps...
    ****Assign Points if it helps******
    Gattu

  • How to find the program name for LSMW

    hi experts,
                  i have created a LSMW for uploading data in HR.i hope there will be a ABAP progarm automatically generated from it .where i can find the program name .
    i have succesfully completed all the 14 stepas and data is uploading comfortably .
    thanx in adavance

    hi,
    just do liek this to know abt the program name,
    select system at the menu in your lsmw,
    select status ,
    in popup u'll get the proram name and all other related details.
    reward points if useful,
    regards,
    seshu.

Maybe you are looking for