How to find the reason for a job failure

Hi,
I have created a job .
It was running fine. But after few days it showed the status as broken.
How do we find the reason for a job failure ?
Thanks.

There should be a trace file in the either the udump or bdump (depending on Oracle version) directory on the DB server. If the job is broken it has probably failed 16 times, so you should have 16 trace files - each possibly showing the same error. The relevant trace files will have j00 in the name, showing that they were generated from dbms_job.
Ben

Similar Messages

[InDesign CS3] how to find the reason of the memory leaks?

Hi all,
I'm working with InDesign CS3. I wrote a plug-in and loaded it into InDesign in debug mode. After I closed the application, I got a console window showing memory leaks as following:
Leaks! 52 leaks, 716804 bytes
Press any key to continue . . .
Does anybody know how to find the reason of the memory leaks? Thanks a lot!
Nicole

Thanks Dave. I'm using Windows, and I also tried MemoryTracker. I got a Leaks.txt which shows the detail of memory leaks as following. But I really can't understand it. Any help? Thanks. Leaks! 7 leaks, 455252 bytes 65036 bytes at: 7B22FF8 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01C96DEC BIBGetVersion cannot be found in any module! 01C96E60 BIBGetVersion cannot be found in any module! 01C979E4 cannot find address in any module! 0131F511 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 0131F4C4 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDBC7E K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDBFBE K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDC558 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 1002C26E cannot find address in any module! 1002BFB9 cannot find address in any module! 00401644 cannot find address in any module! 00405146 cannot find address in any module! 00404EBD cannot find address in any module! 7C817067 RegisterWaitForInputIdle cannot be found in any module! 65036 bytes at: 7B32E38 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01C96DEC BIBGetVersion cannot be found in any module! 01BB149B cannot find address in any module! 01BB4C62 cannot find address in any module! 00EDBCE3 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDBFBE K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDC558 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 1002C26E cannot find address in any module! 1002BFB9 cannot find address in any module! 00401644 cannot find address in any module! 00405146 cannot find address in any module! 00404EBD cannot find address in any module! 7C817067 RegisterWaitForInputIdle cannot be found in any module! 65036 bytes at: 7B52AB8 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01C96DEC BIBGetVersion cannot be found in any module! 02331A7A cannot find address in any module! 0236E7CD cannot find address in any module! 43726F6C cannot find address in any module! 65036 bytes at: 7C93D80 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 02331F36 cannot find address in any module! 02367F85 cannot find address in any module! 02415DB4 cannot find address in any module! 3F800000 cannot find address in any module! 02416799 cannot find address in any module! FFFFFF11 cannot find address in any module! 65036 bytes at: 7CD6028 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01CE1C14 cannot find address in any module! 01DD9346 CTGetVersion cannot be found in any module! 01D9B052 CTGetVersion cannot be found in any module! 01D9B189 CTGetVersion cannot be found in any module! 01D9BB21 CTGetVersion cannot be found in any module! 01D9BD0C CTGetVersion cannot be found in any module! 01D9CE96 CTGetVersion cannot be found in any module! 01D9CEFF CTGetVersion cannot be found in any module! 01DDBEA2 CTGetVersion cannot be found in any module! 01DDC214 CTGetVersion cannot be found in any module! 01DDC7C6 CTGetVersion cannot be found in any module! 65036 bytes at: 16D68200 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01BB178C cannot find address in any module! 01BCE7C8 cannot find address in any module! 01BCEE13 cannot find address in any module! 01BD28C5 cannot find address in any module! 01BD4CB7 cannot find address in any module! 65036 bytes at: 20B68F88 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01CE1C14 cannot find address in any module! 01D2F1A1 cannot find address in any module! 01D6F789 CTGetVersion cannot be found in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module!

How to find the patches for perticular concurrent program

HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank's

Query the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello there, g0ddess.
The following link proves to be a great resource to get started with Apple Training and Certification:
Training and Certification
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How to find the SteroMixer for my HP TouchSmart PC

I just need to know how to find the SteroMixer for my HP TouchSmart. I did read previous concern and also followed the steps but under my hardware it shows this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E&REV_1004 and this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E.
I just need to know which do I use so that I will be able to add music to the CamStudio...

Maybe this helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01461692&cc=us&dlc=en&lc=en
or try them here.
http://h30434.www3.hp.com/?lc=en&cc=us
http://answers.microsoft.com/en-us/windows
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to find the workflow for Change Request for the PO's

Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
Sonia

For 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

How to Find the Runtime for any workitem.

Hi,
Could you please tell how to find the runtime for any workitem.
Thanks,
Bhanu Gattu.

Hi,
I think, your query is pertaining to Workflow.
Please explain your requirement little more.
If you need Runtime Analysis: Then the transaction Code: SE30 must be used.
Thanks.
RamaniN
Edited by: Ramani Nagarajan on May 21, 2009 12:33 PM

How to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPL

Hi ,
how to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPLRSAP_002 ?
I need to extend the Datasource 0PLANT_ATTR with RSAP0001 in EXIT_SAPLRSAP_002.
In Table ROOSOURCE I do not have an entry for 0PLANT_ATTR.
How can I identify the extractstructure for 0PLANT_ATTR ?
Thanks !!!
Martin

Hi Martin
Go to RSA6 and do a find for Plant attr and from there you will find the extract structure: BIW_T001WS.
You can add the fields here and then using CMOD/Exits you can write the code to populate the data.
Thanks
Kalyan

How to find the reason of database lock or wait event as per specific time?

All -
As a part of a job that was running last night by the developers, they encountered an issue wherein a certain constraint was getting hung. I think there was a lock on that specific table.
This happened at between 3.48 AM and 5.59 AM today morning. How can i find out the reason for that specific event for this time duration??
Just an FYI, Later when the job was killed and restarted afterwards it ran fine.

they encountered an issue wherein a certain constraint was getting hung. I see the words but have NO idea what this means.
EXACTLY how can "constraint get hung"?
I think there was a lock on that specific table.Based upon what evidence do you arrive at this conclusion.
ALWAYS
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version;

How portal finds the vale for the sap-language parameter for iView

In the portal one of the ABAP WebDynpro iView is getting displayed in German. The reason for that is the sap-language parameter is being passed as DE. All other iViews in the system are passing the sap-language parameter is as en.
In our system the Logon Language property is blank for the all the iViews. Could you tell me why one specific iView the sap-language is being passed as a DE?
How the portal finds the value for the sap-language parameter?

Hello Venkata,
Check if your Component locale is set to DE.
Component locale
This locale is defined by the following component profile properties:
--ForcedRequestLanguage
--ForcedRequestCountry
Check this for more:
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/938297a5061d69e10000000a1553f6/content.htm
Greetings,
Praveen Gudapati
p.s Points are always welcome for helpful answers

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

How to find the definintion for a particular implementation

hi
ihave the implementation name so i put this in se19
and after enter it asks for definition which has to be created in se18
if we have some predefined definitons already for that implementation
how to find the particular definiton that is to be used

Put that implementation name in the enhancement name option of SE18 and press display. I hope by implementation you dont mean the Z Include.
If it is Z include then look for where use list of that and pick the Enhancement name from there.
Regards,
Amit

How to find the Datasources for the given table names ?

Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
Srinivas

Hi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

How to find the reason for a job failure

Similar Messages

Maybe you are looking for